summaryrefslogtreecommitdiff
path: root/t/t9107-git-svn-migrate.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-01-03Allow the test suite to pass in a directory whose name contains spacesLibravatar Johannes Schindelin1-1/+1
It is totally legitimate to clone Git's source code anywhere, including into, say, directories whose name (or the name of its absolute path) contains spaces. However, a couple of tests failed to anticipate this, for lack of quoting (or in one instance, for failure to expect more than one space in the absolute path of the TEST_DIRECTORY). This can be easily verified by calling these commands in your current clone: git clone . with\ spaces cd with\ spaces make -j15 test Let's fix this. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-14t9107: switch inverted single/double quotes in testLibravatar Jeff King1-2/+3
One of the test snippets in t9107 is enclosed in double quotes, but then uses single quotes to surround an interpolated variable inside the snippet, like: test_expect_success '...' " test -n '$head' " This happens to work because the variable is interpolated _before_ the snippet is run, and the result is eval'd. So as long as the variable does not contain any single quotes, the two are equivalent. And it doesn't, as we know it is a sha1 from rev-parse above. But this construct is unnecessarily confusing. But we can go a step further in cleaning up. The test is really checking that a particular ref has a value. Rather than checking if rev-parse produced output, we can just move rev-parse into the test itself, and rely on the exit code from --verify. Nobody else cares about the $head variable at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-14t9107: use "return 1" instead of "exit 1"Libravatar Jeff King1-16/+26
When a test runs a loop, it cannot rely on the usual &&-chaining to propagate a failure inside the loop; it needs to break out with a failure signal. However, unless you are in a subshell, doing so with "exit 1" will exit the entire test script, not just the test snippet we are in (and cause the harness to complain that test_done was never reached). So the fundamental point of this patch is s/exit/return/. But while we're there, let's fix a number of style and readability issues: - snippets in double-quotes need an extra layer of quoting for their meta-characters; let's avoid that by using single quotes - accumulating loop output by appending to a file in each iteration is brittle, as it can be affected by content left in the file by earlier tests. Instead, it's better to redirect stdout for the whole loop, so we know the output only comes from that loop. - using "test -z" to check that diff output is empty is overly verbose; we can just ask diff to use --exit-code. - we can factor out long lists of refs to make it more obvious we're using the same ones in each loop - subshells are unnecessary when ending an &&-chain with "|| return 1" - minor style fixups like space-after-redirection, and "do" and "done" on their own lines Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13t/lib-git-svn: drop $remote_git_svn and $git_svn_idLibravatar Jeff King1-7/+7
These variables were added in 16805d3 (t/t91XX-svn: start removing use of "git-" from these tests, 2008-09-08) so that running: git grep git- would return fewer hits. At the time, we were transitioning away from the use of the "dashed" git-foo form. That transition has been over for years, and grepping for "git-" in the test suite yields thousands of hits anyway (all presumably false positives). With their original purpose gone, these variables serve only to obfuscate the tests. Let's get rid of them. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-12t9107-git-svn-migrate.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-14/+14
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-19Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not givenLibravatar Johan Herland1-27/+27
git-svn by default puts its Subversion-tracking refs directly in refs/remotes/*. This runs counter to Git's convention of using refs/remotes/$remote/* for storing remote-tracking branches. Furthermore, combining git-svn with regular git remotes run the risk of clobbering refs under refs/remotes (e.g. if you have a git remote called "tags" with a "v1" branch, it will overlap with the git-svn's tracking branch for the "v1" tag from Subversion. Even though the git-svn refs stored in refs/remotes/* are not "proper" remote-tracking branches (since they are not covered by a proper git remote's refspec), they clearly represent a similar concept, and would benefit from following the same convention. For example, if git-svn tracks Subversion branch "foo" at refs/remotes/foo, and you create a local branch refs/heads/foo to add some commits to be pushed back to Subversion (using "git svn dcommit), then it is clearly unhelpful of Git to throw warning: refname 'foo' is ambiguous. every time you checkout, rebase, or otherwise interact with the branch. The existing workaround for this is to supply the --prefix=quux/ to git svn init/clone, so that git-svn's tracking branches end up in refs/remotes/quux/* instead of refs/remotes/*. However, encouraging users to specify --prefix to work around a design flaw in git-svn is suboptimal, and not a long term solution to the problem. Instead, git-svn should default to use a non-empty prefix that saves unsuspecting users from the inconveniences described above. This patch will only affect newly created git-svn setups, as the --prefix option only applies to git svn init (and git svn clone). Existing git-svn setups will continue with their existing (lack of) prefix. Also, if anyone somehow prefers git-svn's old layout, they can recreate that by explicitly passing an empty prefix (--prefix "") on the git svn init/clone command line. The patch changes the default value for --prefix from "" to "origin/", updates the git-svn manual page, and fixes the fallout in the git-svn testcases. (Note that this patch might be easier to review using the --word-diff and --word-diff-regex=. diff options.) [ew: squashed description of <= 1.9 behavior into manpage] Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-02git-svn: attempt to mimic SVN 1.7 URL canonicalizationLibravatar Michael G. Schwern1-1/+3
Previously, our URL canonicalization didn't do much of anything. Now it actually escapes and collapses slashes. This is mostly a cut & paste of escape_url from git-svn. This is closer to how SVN 1.7's canonicalization behaves. Doing it with 1.6 lets us chase down some problems caused by more effective canonicalization without having to deal with all the other 1.7 issues on top of that. * Remote URLs have to be canonicalized otherwise Git::SVN->find_existing_remote will think they're different. * The SVN remote is now written to the git config canonicalized. That should be ok. Adjust a test to account for that. [ew: commit title] Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-02t9107: fix typoLibravatar Michael G. Schwern1-1/+1
Test to check that the migration got rid of the old style git-svn directory. It wasn't failing, just throwing a message to STDERR. [ew: commit title] Signed-off-by: Eric Wong <normalperson@yhbt.net>
2010-09-09tests: subshell indentation stylefixLibravatar Jonathan Nieder1-7/+9
Format the subshells introduced by the previous patch (Several tests: cd inside subshell instead of around, 2010-09-06) like so: ( cd subdir && ... ) && This is generally easier to read and has the nice side-effect that this patch will show what commands are used in the subshell, making it easier to check for lost environment variables and similar behavior changes. Cc: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-06Several tests: cd inside subshell instead of aroundLibravatar Jens Lehmann1-2/+2
Fixed all places where it was a straightforward change from cd'ing into a directory and back via "cd .." to a cd inside a subshell. Found these places with "git grep -w "cd \.\.". Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-12svn: allow branches outside of refs/remotesLibravatar Adam Brewster1-8/+6
It may be convenient for some users to store svn remote tracking branches outside of the refs/remotes/ heirarchy. To accomplish this feat, this patch includes the entire path to the ref in $r->{'refname'} in &read_all_remotes and tries to change references to this entry so the new value makes sense. [ew: fixed backwards compatibility, long lines] Signed-off-by: Adam Brewster <adambrewster@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2009-08-10svn: Add && to t9107-git-svn-migrate.shLibravatar Adam Brewster1-3/+11
It was probably intended for the test to fail unless all of the commands succeed. [ew: fixed tests to actually work] Signed-off-by: Eric Wong <normalperson@yhbt.net>
2009-05-21git-svn testsuite: use standard configuration for Subversion toolsLibravatar Eygene Ryabinkin1-1/+1
I have tweaked configuration in my ~/.subversion directory, namely I am running auto-properties and automatically adding '$Id$' expansion to every file. This choke the last test named 'proplist' from t9101-git-svn-props.sh, because one more property, svn:keywords is automatically added. I had just wrapped svn invocation with the svn_cmd that specifies empty directory via --config-dir argument. Since the latter is the global option, it should be recognized by all svn subcommands, so no regressions will be introduced. Now svn_cmd is used everywhere, not just in the failed test module: this should guard us from the future clashes with user-defined configuration tweaks. Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru> Acked-by: Eric Wong <normalperson@yhbt.net>
2008-09-08t/t91XX git-svn tests: run "git svn" not "git-svn"Libravatar Nanako Shiraishi1-11/+11
This replaces 'git-svn' with 'git svn' in the tests. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-08t/t91XX-svn: start removing use of "git-" from these testsLibravatar Nanako Shiraishi1-6/+6
Subversion tests use too many "git-foo" form, so I am converting them in two steps. This first step replaces literal strings "remotes/git-svn" and "git-svn-id" by introducing $remotes_git_svn and $git_svn_id constants defined as shell variables. This will reduce the number of false hits from "git grep". Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-62/+62
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10git-svn: replace .rev_db with a more space-efficient .rev_map formatLibravatar Eric Wong1-6/+10
Migrations are done automatically on an as-needed basis when new revisions are to be fetched. Stale remote branches do not get migrated, yet. However, unless you set noMetadata or useSvkProps it's safe to just do: find $GIT_DIR/svn -name '.rev_db*' -print0 | xargs rm -f to purge all the old .rev_db files. The new format is a one-way migration and is NOT compatible with old versions of git-svn. This is the replacement for the rev_db format, which was too big and inefficient for large repositories with a lot of sparse history (mainly tags). The format is this: - 24 bytes for every record, * 4 bytes for the integer representing an SVN revision number * 20 bytes representing the sha1 of a git commit - No empty padding records like the old format - new records are written append-only since SVN revision numbers increase monotonically - lookups on SVN revision number are done via a binary search - Piping the file to xxd(1) -c24 is a good way of dumping it for viewing or editing, should the need ever arise. As with .rev_db, these files are disposable unless noMetadata or useSvmProps is set. Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-13/+13
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-02-23git-svn: hide the private git-svn 'config' file as '.metadata'Libravatar Eric Wong1-0/+1
Having it named as 'config' prevents us from tracking a ref named 'config', which is a huge mistake. On the non-technical side, the word 'config' implies that a user can freely modify it; but that's not the case here. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: allow 'init' to act as multi-initLibravatar Eric Wong1-2/+2
multi-init is now just an alias that requires -T/-t/-b; all options that 'init' can now accept. This will hopefully simplify usage and reduce typing. Also, allow the --shared option in 'init' to take an optional argument now that 'git-init --shared' supports an optional argument. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23t910*: s/repo-config/config/g; poke around possible race conditionsLibravatar Eric Wong1-7/+7
Some of the repo-config => config renaming missed the git-svn tests; so I'm just renaming them to be consisten with the rest of the modern git. Also, some of the newer tests didn't have 'poke' in them to workaround race conditions on fast machines. This adds places where they can _possibly_ occur; but I don't have fast enough hardware to trigger them. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: use separate, per-repository .rev_db filesLibravatar Eric Wong1-0/+11
We need a separate .rev_db file for each repository we're tracking. This allows us to track the same logical path off multiple mirrors. We preserve a symlink to the old .rev_db (no-UUID) if we're (auto-)migrating from an old version to preserve backwards compatibility. Also, get rid of the uuid() wrapper since we cache UUID in our private config, and the SVN::Ra::get_uuid() function memoizes the return value per-connection. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: prepare multi-init for wildcard supportLibravatar Eric Wong1-6/+14
Update the tests since we no longer write so many things to the config. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: just name the default svn-remote "svn" instead of "git-svn"Libravatar Eric Wong1-6/+6
It can be confusing and redundant, since historically the default remote ref (not remote itself) has been "git-svn", too. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: avoid tracking change-less revisionsLibravatar Eric Wong1-5/+9
They simply aren't interesting to track, and this will allow us to avoid get_log(). Since r0 is covered by this, we need to update the tests to not rely on r0 (which is always empty). Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: enable --minimize to simplify the config and connectionsLibravatar Eric Wong1-0/+25
--minimize will update the git-svn configuration to attempt to connect to the repository root (instead of directly to the path(s) we are tracking) in order to allow more efficient reuse of connections (for multi-fetch and follow-parent). Signed-off-by: Eric Wong <normalperson@yhbt.net>
2007-02-23git-svn: add support for metadata in .git/configLibravatar Eric Wong1-0/+63
Of course, we handle metadata migrations from previous versions and we have added unit tests. The new .git/config remotes resemble non-SVN remotes. Below is an example with comments: [svn-remote "git-svn"] ; like non-svn remotes, we have one URL per-remote url = http://foo.bar.org/svn ; 'fetch' keys are done in the same way as non-svn ; remotes, too. With the left-hand-side of the ':' ; being the remote (SVN) repository path relative to the ; above 'url' key; and the right-hand-side being a ; remote ref in git (refs/remotes/*). ; An empty left-hand-side means that it will fetch ; the entire contents of the 'url' key. ; old-style (migrated from previous versions of git-svn) ; are like this: fetch = :refs/remotes/git-svn ; this is created by a current version of git-svn ; using the multi-init command with an explicit ; url (specified above). This allows multi-init ; to reuse SVN::Ra connections. fetch = trunk:refs/remotes/trunk fetch = branches/a:refs/remotes/a fetch = branches/b:refs/remotes/b fetch = tags/0.1:refs/remotes/tags/0.1 fetch = tags/0.2:refs/remotes/tags/0.2 fetch = tags/0.3:refs/remotes/tags/0.3 [svn-remote "alt"] ; this is another old-style remote migrated over ; to the new config format url = http://foo.bar.org/alt fetch = :refs/remotes/alt Signed-off-by: Eric Wong <normalperson@yhbt.net>