| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Many a test requires either POSIXPERM (to change the executable bit) or
SYMLINKS, and neither are available on Windows.
This lets t9100-git-svn-basic.sh pass in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git-rev-parse already checks for the $GIT_DIR environment
variable and that it returns an actual git repository, there is no
need to repeat the checks again here.
This also fixes a problem where git-svn did not work in cases where
.git was a file with a gitdir: link.
[ew: squashed test case,
delay setting GIT_DIR until after `git rev-parse --cdup` to fix t9101,
(thanks to Junio)]
Signed-off-by: Barry Wardell <barry.wardell@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
open_or_add_dir checks to see if the directory already exists or not.
If it already exists and is not a directory, then we fail. However,
open_or_add_dir did not previously account for the possibility that the
path did exist as a file, but is deleted in the current commit.
In order to prevent this legitimate case from failing, open_or_add_dir
needs to know what files are deleted in the current commit.
Unfortunately that information has to be plumbed through a couple of
layers.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/maint-fix-test:
Several tests: cd inside subshell instead of around
Conflicts:
t/t9600-cvsimport.sh
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
I have tweaked configuration in my ~/.subversion directory, namely I am
running auto-properties and automatically adding '$Id$' expansion to
every file. This choke the last test named 'proplist' from
t9101-git-svn-props.sh, because one more property, svn:keywords is
automatically added.
I had just wrapped svn invocation with the svn_cmd that specifies empty
directory via --config-dir argument. Since the latter is the global
option, it should be recognized by all svn subcommands, so no
regressions will be introduced.
Now svn_cmd is used everywhere, not just in the failed test module: this
should guard us from the future clashes with user-defined configuration
tweaks.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
When in a bare repository (or .git, for that matter), git-svn would fail
to initialise properly, since git rev-parse --show-cdup would not output
anything. However, git rev-parse --show-cdup actually returns an error
code if it's really not in a git directory.
Fix the issue by checking for an explicit error from git rev-parse, and
setting $git_dir appropriately if instead it just does not output.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This changes "git-foo" to "git foo" when message strings in tests
name git subcommands.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces 'git-svn' with 'git svn' in the tests.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subversion tests use too many "git-foo" form, so I am converting them
in two steps.
This first step replaces literal strings "remotes/git-svn" and "git-svn-id"
by introducing $remotes_git_svn and $git_svn_id constants defined as shell
variables. This will reduce the number of false hits from "git grep".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting the GIT_SVN_LC_ALL variable, default to the $LANG
environment variable, when the $LC_ALL override is not set.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For tracking branches and tags, git-svn prefers to connect
to the root of the repository or at least the level that
houses branches and tags as well as trunk. However, users
that are accustomed to tracking a single directory have
no use for this feature.
As pointed out by Junio, users may not have permissions to
connect to connect to a higher-level path in the repository.
While the current minimize_url() function detects lack of
permissions to certain paths _after_ successful logins, it
cannot effectively determine if it is trying to access a
login-only portion of a repo when the user expects to
connect to a part where anonymous access is allowed.
For people used to the git-svnimport switches of
--trunk, --tags, --branches, they'll already pass the
repository root (or root+subdirectory), so minimize URL
isn't of too much use to them, either.
For people *not* used to git-svnimport, git-svn also
supports:
git svn init --minimize-url \
--trunk http://repository-root/foo/trunk \
--branches http://repository-root/foo/branches \
--tags http://repository-root/foo/tags
And this is where the new --minimize-url command-line switch
comes in to allow for this behavior to continue working.
|
|
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".
This commit is really the result of
$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
|
|
Some of the repo-config => config renaming missed the git-svn
tests; so I'm just renaming them to be consisten with the
rest of the modern git.
Also, some of the newer tests didn't have 'poke' in them
to workaround race conditions on fast machines. This adds
places where they can _possibly_ occur; but I don't have
fast enough hardware to trigger them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
It can be confusing and redundant, since historically the
default remote ref (not remote itself) has been "git-svn", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
I broke this part with the URL minimization; since
git-svn will now try to connect to the root of
the repository and will end up writing files
there if it can...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
They simply aren't interesting to track, and this will allow
us to avoid get_log().
Since r0 is covered by this, we need to update the tests to not
rely on r0 (which is always empty).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This allows connections to be used more efficiently and not require
users to run 'git-svn migrate --minimize' for new repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Having multiple fetch refspecs pointing to the same local ref
would be a very bad thing. Start avoiding the use of fatal() or
exit() inside the modules so we can libify more easily.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We don't support the svn command-line client anymore; nor
do we support anything before SVN 1.1.0, so we can be certain
symlinks will be supported in the SVN repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The latest changes to git-commit have made it more verbose; and
I was running the setup of the tests outside of the test_expect_*,
so errors in those were not caught. Now we move them to where
they can be eval'ed and have their output trapped.
export var=value has been removed
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
'set-tree' probably accurately describes what the command
formerly known as 'commit' does.
I'm not entirely sure that 'dcommit' should be renamed to 'commit'
just yet... Perhaps 'push' or 'push-changes'?
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using the command-line client was great for prototyping and
getting something working quickly. Eventually I found time
to study the library documentation and add support for using
the libraries which are much faster and more flexible when
it comes to supporting new features.
Note that we require version 1.1 of the SVN libraries, whereas
we supported the command-line svn client down to version 1.0.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* Enable test for delta transfers in full-svn-test.
* Run tests against the root of the repository so we won't have
to revisit 308906fa6e98132cab839a4f42701386fba368ef and
efe4631def181d32f932672a7ea31e52ee0ab308 again.
The graft-branches test still runs as before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Johannes Schindelin
Barry Wardell
Junio C Hamano
Steven Walter
Jeff King
Jonathan Nieder
Jens Lehmann
David D. Kilzer
Ævar Arnfjörð Bjarmason
Thomas Rast
Eygene Ryabinkin
Johannes Sixt
Deskin Miller
Nanako Shiraishi
Stephan Beyer
Ramsay Jones
Bryan Donlan
Eric Wong