| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
|
|
Given that git-maintenance simply calls out git-pack-refs, it seems superfluous
to test the functionality of pack-refs itself, as that is covered by
t3210-pack-refs.sh.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a remote has the skipFetchAll setting enabled, then that remote is
not intended for frequent fetching. It makes sense to not fetch that
data during the 'prefetch' maintenance task. Skip that remote in the
iteration without error. The skip_default_update member is initialized
in remote.c:handle_config() as part of initializing the 'struct remote'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The periodic maintenance tasks configured by `git maintenance start`
invoke `git for-each-repo` to run `git maintenance run` on each path
specified by the multi-value global configuration variable
`maintenance.repo`. Because `git for-each-repo` will likely be run
outside of the repositories which require periodic maintenance, it is
mandatory that the repository paths specified by `maintenance.repo` are
absolute.
Unfortunately, however, `git maintenance register` does nothing to
ensure that the paths it assigns to `maintenance.repo` are indeed
absolute, and may in fact -- especially in the case of a bare repository
-- assign a relative path to `maintenance.repo` instead. Fix this
problem by converting all paths to absolute before assigning them to
`maintenance.repo`.
While at it, also fix `git maintenance unregister` to convert paths to
absolute, as well, in order to ensure that it can correctly remove from
`maintenance.repo` a path assigned via `git maintenance register`.
Reported-by: Clement Moyroud <clement.moyroud@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the 'maintenance.strategy' config option is set to 'incremental',
a default maintenance schedule is enabled. Add the 'pack-refs' task to
that strategy at the weekly cadence.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is valuable to collect loose refs into a more compressed form. This
is typically the packed-refs file, although this could be the reftable
in the future. Having packed refs can be extremely valuable in repos
with many tags or remote branches that are not modified by the local
user, but still are necessary for other queries.
For instance, with many exploded refs, commands such as
git describe --tags --exact-match HEAD
can be very slow (multiple seconds). This command in particular is used
by terminal prompts to show when a detatched HEAD is pointing to an
existing tag, so having it be slow causes significant delays for users.
Add a new 'pack-refs' maintenance task. It runs 'git pack-refs --all
--prune' to move loose refs into a packed form. For now, that is the
packed-refs file, but could adjust to other file formats in the future.
This is the first of several sub-tasks of the 'gc' task that could be
extracted to their own tasks. In this process, we should not change the
behavior of the 'gc' task since that remains the default way to keep
repositories maintained. Creating a new task for one of these sub-tasks
only provides more customization options for those choosing to not use
the 'gc' task. It is certainly possible to have both the 'gc' and
'pack-refs' tasks enabled and run regularly. While they may repeat
effort, they do not conflict in a destructive way.
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs should
be run during 'git maintenance run --auto'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests for the 'prefetch' task create remotes and fetch refs into
'refs/prefetch/<remote>/' and tags into 'refs/tags/'. These tests use
the remotes to create objects not intended to be seen by the "local"
repository.
In that sense, the incrmental-repack tasks did not have these objects
and refs in mind. That test replaces the object directory with a
specific pack-file layout for testing the batch-size logic. However,
this causes some operations to start showing warnings such as:
error: refs/prefetch/remote1/one does not point to a valid object!
error: refs/tags/one does not point to a valid object!
This only shows up if you run the tests verbosely and watch the output.
It caught my eye and I _thought_ that there was a bug where 'git gc' or
'git repack' wouldn't check 'refs/prefetch/' before pruning objects.
That is incorrect. Those commands do handle 'refs/prefetch/' correctly.
All that is left is to clean up the tests in t7900-maintenance.sh to
remove these tags and refs that are not being repacked for the
incremental-repack tests. Use update-ref to ensure this works with all
ref backends.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'prefetch' task fetches refs from all remotes and places them in the
refs/prefetch/<remote>/ refspace. As this task is intended to run in the
background, this allows users to keep their local data very close to the
remote servers' data while not updating the users' understanding of the
remote refs in refs/remotes/<remote>/.
However, this can clutter 'git log' decorations with copies of the refs
with the full name 'refs/prefetch/<remote>/<branch>'.
The log.excludeDecoration config option was added in a6be5e67 (log: add
log.excludeDecoration config option, 2020-05-16) for exactly this
purpose.
Ensure we set this only for users that would benefit from it by
assigning it at the beginning of the prefetch task. Other alternatives
would be during 'git maintenance register' or 'git maintenance start',
but those might assign the config even when the prefetch task is
disabled by existing config. Further, users could run 'git maintenance
run --task=prefetch' using their own scripting or scheduling. This
provides the best coverage to automatically update the config when
valuable.
It is improbable, but possible, that users might want to run the
prefetch task _and_ see these refs in their log decorations. This seems
incredibly unlikely to me, but users can always opt-in on a
command-by-command basis using --decorate-refs=refs/prefetch/.
Test that this works in a few cases. In particular, ensure that our
assignment of log.excludeDecoration=refs/prefetch/ is additive to other
existing exclusions. Further, ensure we do not add multiple copies in
multiple runs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
|
|
Git's background maintenance uses cron by default, but this is not
available on Windows. Instead, integrate with Task Scheduler.
Tasks can be scheduled using the 'schtasks' command. There are several
command-line options that can allow for some advanced scheduling, but
unfortunately these seem to all require authenticating using a password.
Instead, use the "/xml" option to pass an XML file that contains the
configuration for the necessary schedule. These XML files are based on
some that I exported after constructing a schedule in the Task Scheduler
GUI. These options only run background maintenance when the user is
logged in, and more fields are populated with the current username and
SID at run-time by 'schtasks'.
Since the GIT_TEST_MAINT_SCHEDULER environment variable allows us to
specify 'schtasks' as the scheduler, we can test the Windows-specific
logic on other platforms. Thus, add a check that the XML file written
by Git is valid when xmllint exists on the system.
Since we use a temporary file for the XML files sent to 'schtasks', we
prefix the random characters with the frequency so it is easier to
examine the proper file during tests. Instead of an exact match on the
'args' file, we 'grep' for the arguments other than the filename.
There is a deficiency in the current design. Windows has two kinds of
applications: GUI applications that start by "winmain()" and console
applications that start by "main()". Console applications are attached
to a new Console window if they are not already associated with a GUI
application. This means that every hour the scheudled task launches a
command window for the scheduled tasks. Not only is this visually
obtrusive, but it also takes focus from whatever else the user is
doing!
A simple fix would be to insert a GUI application that acts as a shim
between the scheduled task and Git. This is currently possible in Git
for Windows by setting the <Command> tag equal to
C:\Program Files\Git\git-bash.exe
with options "--hide --no-needs-console --command=cmd\git.exe"
followed by the arguments currently used. Since git-bash.exe is not
included in Windows builds of core Git, I chose to leave out this
feature. My plan is to submit a small patch to Git for Windows that
converts the use of git.exe with this use of git-bash.exe in the
short term. In the long term, we can consider creating this GUI
shim application within core Git, perhaps in contrib/.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing mechanism for scheduling background maintenance is done
through cron. The 'crontab -e' command allows updating the schedule
while cron itself runs those commands. While this is technically
supported by macOS, it has some significant deficiencies:
1. Every run of 'crontab -e' must request elevated privileges through
the user interface. When running 'git maintenance start' from the
Terminal app, it presents a dialog box saying "Terminal.app would
like to administer your computer. Administration can include
modifying passwords, networking, and system settings." This is more
alarming than what we are hoping to achieve. If this alert had some
information about how "git" is trying to run "crontab" then we would
have some reason to believe that this dialog might be fine. However,
it also doesn't help that some scenarios just leave Git waiting for
a response without presenting anything to the user. I experienced
this when executing the command from a Bash terminal view inside
Visual Studio Code.
2. While cron initializes a user environment enough for "git config
--global --show-origin" to show the correct config file information,
it does not set up the environment enough for Git Credential Manager
Core to load credentials during a 'prefetch' task. My prefetches
against private repositories required re-authenticating through UI
pop-ups in a way that should not be required.
The solution is to switch from cron to the Apple-recommended [1]
'launchd' tool.
[1] https://developer.apple.com/library/archive/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/ScheduledJobs.html
The basics of this tool is that we need to create XML-formatted
"plist" files inside "~/Library/LaunchAgents/" and then use the
'launchctl' tool to make launchd aware of them. The plist files
include all of the scheduling information, along with the command-line
arguments split across an array of <string> tags.
For example, here is my plist file for the weekly scheduled tasks:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0"><dict>
<key>Label</key><string>org.git-scm.git.weekly</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/git-core/git</string>
<string>--exec-path=/usr/local/libexec/git-core</string>
<string>for-each-repo</string>
<string>--config=maintenance.repo</string>
<string>maintenance</string>
<string>run</string>
<string>--schedule=weekly</string>
</array>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Day</key><integer>0</integer>
<key>Hour</key><integer>0</integer>
<key>Minute</key><integer>0</integer>
</dict>
</array>
</dict>
</plist>
The schedules for the daily and hourly tasks are more complicated
since we need to use an array for the StartCalendarInterval with
an entry for each of the six days other than the 0th day (to avoid
colliding with the weekly task), and each of the 23 hours other
than the 0th hour (to avoid colliding with the daily task).
The "Label" value is currently filled with "org.git-scm.git.X"
where X is the frequency. We need a different plist file for each
frequency.
The launchctl command needs to be aligned with a user id in order
to initialize the command environment. This must be done using
the 'launchctl bootstrap' subcommand. This subcommand is new as
of macOS 10.11, which was released in September 2015. Before that
release the 'launchctl load' subcommand was recommended. The best
source of information on this transition I have seen is available
at [2]. The current design does not preclude a future version that
detects the available fatures of 'launchctl' to use the older
commands. However, it is best to rely on the newest version since
Apple might completely remove the deprecated version on short
notice.
[2] https://babodee.wordpress.com/2016/04/09/launchctl-2-0-syntax/
To remove a schedule, we must run 'launchctl bootout' with a valid
plist file. We also need to 'bootout' a task before the 'bootstrap'
subcommand will succeed, if such a task already exists.
The need for a user id requires us to run 'id -u' which works on
POSIX systems but not Windows. Further, the need for fully-qualitifed
path names including $HOME behaves differently in the Git internals and
the external test suite. The $HOME variable starts with "C:\..." instead
of the "/c/..." that is provided by Git in these subcommands. The test
therefore has a prerequisite that we are not on Windows. The cross-
platform logic still allows us to test the macOS logic on a Linux
machine.
We can verify the commands that were run by 'git maintenance start'
and 'git maintenance stop' by injecting a script that writes the
command-line arguments into GIT_TEST_MAINT_SCHEDULER.
An earlier version of this patch accidentally had an opening
"<dict>" tag when it should have had a closing "</dict>" tag. This
was caught during manual testing with actual 'launchctl' commands,
but we do not want to update developers' tasks when running tests.
It appears that macOS includes the "xmllint" tool which can verify
the XML format. This is useful for any system that might contain
the tool, so use it whenever it is available.
We strive to make these tests work on all platforms, but Windows caused
some headaches. In particular, the value of getuid() called by the C
code is not guaranteed to be the same as `$(id -u)` invoked by a test.
This is because `git.exe` is a native Windows program, whereas the
utility programs run by the test script mostly utilize the MSYS2 runtime,
which emulates a POSIX-like environment. Since the purpose of the test
is to check that the input to the hook is well-formed, the actual user
ID is immaterial, thus we can work around the problem by making the the
test UID-agnostic. Another subtle issue is the $HOME environment
variable being a Windows-style path instead of a Unix-style path. We can
be more flexible here instead of expecting exact path matches.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we insert our "BEGIN" and "END" markers into the cron table, it's
so that a Git version from many years into the future would be able to
identify this region in the cron table. Let's add a test to make sure
that these markers don't ever change.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for test breakage.
* js/t7900-protect-pwd-in-config-get:
t7900: use --fixed-value in git-maintenance tests
|
|
Use --fixed-value in git-config calls in the git-maintenance tests, so
that the tests will continue to work even if the repo path contains
regexp metacharacters.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git maintenance run/start/stop" needed to be run in a repository
to hold the lockfile they use, but didn't make sure they are
actually in a repository, which has been corrected.
* rs/maintenance-run-outside-repo:
t7900: fix typo: "test_execpt_success"
maintenance: fix SEGFAULT when no repository
|
|
Test fix.
* ds/maintenance-part-2:
t7900: speed up expensive test
|
|
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test marked with EXPENSIVE creates two 2.5GB files and adds them to
the repository. This takes 194s to run on my machine, versus 2s when the
EXPENSIVE prereq isn't set. We can trim this down a bit by doing two
things:
- use "git commit --quiet" to avoid spending time generating a diff
summary (this actually only helps for the second commit, but I've
added it here to both for consistency). This shaves off 8s.
- set core.compression to 0. We know these files are full of random
bytes, and so won't compress (that's the point of the test!).
Spending cycles on zlib is pointless. This shaves off 122s.
After this, my total time to run the script is 64s. That won't help
normal runs without GIT_TEST_LONG set, of course, but it's easy enough
to do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git maintenance run" and "git maintenance start/stop" commands
holds a file-based lock at the .git/maintenance.lock and
.git/schedule.lock respectively. These locks are used to ensure only
one maintenance process is executed at the time as both operations
involves writing data into the git repository.
The path to the lock file is built using
"the_repository->objects->odb->path" that results in SEGFAULT when we
have no repository available as "the_repository->objects->odb" is
set to NULL.
Let's teach maintenance command to use RUN_SETUP option that will
provide the validation and fail when running outside of a repository.
Hence fixing the SEGFAULT for all three operations and making the
behaviour consistent across all subcommands.
Setting the RUN_SETUP also provides the same protection for all
subcommands given that the "register" and "unregister" also requires to
be executed inside a repository.
Furthermore let's remove the local validation implemented by the
"register" and "unregister" as this will not be required anymore with
the new option.
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a repository's leading directories contain regex metacharacters,
the config calls for 'git maintenance register' and 'git maintenance
unregister' are not careful enough. Use the new --fixed-value option
to direct the config machinery to use exact string matches. This is a
more robust option than escaping these arguments in a piecemeal fashion.
For the test, require that we are not running on Windows since the '+'
and '*' characters are not allowed on that filesystem.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing schedule mechanism using 'cron' is supported by POSIX
platforms, but not Windows. It also works slightly differently on
macOS to significant detriment of the user experience. To allow for
new implementations on these platforms, extract a method that
performs the platform-specific scheduling mechanism. This will be
swapped at compile time with new implementations on specialized
platforms.
As we add this generality, rename GIT_TEST_CRONTAB to
GIT_TEST_MAINT_SCHEDULER. Further, this variable is now parsed as
"<scheduler>:<command>" so we can test platform-specific scheduling
logic even when not on the correct platform. By specifying the
<scheduler> in this string, we will be able to test all three sets of
Git logic from a Linux machine.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
Test-coverage enhancement of running commit-graph task "git
maintenance" as needed led to discovery and fix of a bug.
* ds/maintenance-commit-graph-auto-fix:
maintenance: core.commitGraph=false prevents writes
maintenance: test commit-graph auto condition
|
|
The 'git maintenance (register|start)' subcommands add the current
repository to the global Git config so maintenance will operate on that
repository. It does not specify what maintenance should occur or how
often.
To make it simple for users to start background maintenance with a
recommended schedlue, update the 'maintenance.strategy' config option in
both the 'register' and 'start' subcommands. This allows users to
customize beyond the defaults using individual
'maintenance.<task>.schedule' options, but also the user can opt-out of
this strategy using 'maintenance.strategy=none'.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To provide an on-ramp for users to use background maintenance without
several 'git config' commands, create a 'maintenance.strategy' config
option. Currently, the only important value is 'incremental' which
assigns the following schedule:
* gc: never
* prefetch: hourly
* commit-graph: hourly
* loose-objects: daily
* incremental-repack: daily
These tasks are chosen to minimize disruptions to foreground Git
commands and use few compute resources.
The 'maintenance.strategy' is intended as a baseline that can be
customzied further by manually assigning 'maintenance.<task>.enabled'
and 'maintenance.<task>.schedule' config options, which will override
any recommendation from 'maintenance.strategy'. This operates similarly
to config options like 'feature.experimental' which operate as "meta"
config options that change default config values.
This presents a way forward for updating the 'incremental' strategy in
the future or adding new strategies. For example, a potential strategy
could be to include a 'full' strategy that runs the 'gc' task weekly
and no other tasks by default.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently, a user had an issue due to combining
fetch.writeCommitGraph=true with core.commitGraph=false. The root bug
has been resolved by preventing commit-graph writes when
core.commitGraph is disabled. This happens inside the 'git commit-graph
write' command, but we can be more aware of this situation and prevent
that process from ever starting in the 'commit-graph' maintenance task.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The auto condition for the commit-graph maintenance task walks refs
looking for commits that are not in the commit-graph file. This was
added in 4ddc79b2 (maintenance: add auto condition for commit-graph
task, 2020-09-17) but was left untested.
The initial goal of this change was to demonstrate the feature works
properly by adding tests. However, there was an off-by-one error that
caused the basic tests around maintenance.commit-graph.auto=1 to fail
when it should work.
The subtlety is that if a ref tip is not in the commit-graph, then we
were not adding that to the total count. In the test, we see that we
have only added one commit since our last commit-graph write, so the
auto condition would say there is nothing to do.
The fix is simple: add the check for the commit-graph position to see
that the tip is not in the commit-graph file before starting our walk.
Since this happens before adding to the DFS stack, we do not need to
clear our (currently empty) commit list.
This does add some extra complexity for the test, because we also want
to verify that the walk along the parents actually does some work. This
means we need to add at least two commits in a row without writing the
commit-graph. However, we also need to make sure no additional refs are
pointing to the middle of this list or else the for_each_ref() in
should_write_commit_graph() might visit these commits as tips instead of
doing a DFS walk. Hence, the last two commits are added with "git
commit" instead of "test_commit".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new subcommands to 'git maintenance' that start or stop background
maintenance using 'cron', when available. This integration is as simple
as I could make it, barring some implementation complications.
The schedule is laid out as follows:
0 1-23 * * * $cmd maintenance run --schedule=hourly
0 0 * * 1-6 $cmd maintenance run --schedule=daily
0 0 * * 0 $cmd maintenance run --schedule=weekly
where $cmd is a properly-qualified 'git for-each-repo' execution:
$cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo
where $path points to the location of the Git executable running 'git
maintenance start'. This is critical for systems with multiple versions
of Git. Specifically, macOS has a system version at '/usr/bin/git' while
the version that users can install resides at '/usr/local/bin/git'
(symlinked to '/usr/local/libexec/git-core/git'). This will also use
your locally-built version if you build and run this in your development
environment without installing first.
This conditional schedule avoids having cron launch multiple 'git
for-each-repo' commands in parallel. Such parallel commands would likely
lead to the 'hourly' and 'daily' tasks competing over the object
database lock. This could lead to to some tasks never being run! Since
the --schedule=<frequency> argument will run all tasks with _at least_
the given frequency, the daily runs will also run the hourly tasks.
Similarly, the weekly runs will also run the daily and hourly tasks.
The GIT_TEST_CRONTAB environment variable is not intended for users to
edit, but instead as a way to mock the 'crontab [-l]' command. This
variable is set in test-lib.sh to avoid a future test from accidentally
running anything with the cron integration from modifying the user's
schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our
tests to check how the schedule is modified in 'git maintenance
(start|stop)' commands.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for launching background maintenance from the 'git
maintenance' builtin, create register/unregister subcommands. These
commands update the new 'maintenance.repos' config option in the global
config so the background maintenance job knows which repositories to
maintain.
These commands allow users to add a repository to the background
maintenance list without disrupting the actual maintenance mechanism.
For example, a user can run 'git maintenance register' when no
background maintenance is running and it will not start the background
maintenance. A later update to start running background maintenance will
then pick up this repository automatically.
The opposite example is that a user can run 'git maintenance unregister'
to remove the current repository from background maintenance without
halting maintenance for other repositories.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintenance currently triggers when certain data-size thresholds are
met, such as number of pack-files or loose objects. Users may want to
run certain maintenance tasks based on frequency instead. For example,
a user may want to perform a 'prefetch' task every hour, or 'gc' task
every day. To help these users, update the 'git maintenance run' command
to include a '--schedule=<frequency>' option. The allowed frequencies
are 'hourly', 'daily', and 'weekly'. These values are also allowed in a
new config value 'maintenance.<task>.schedule'.
The 'git maintenance run --schedule=<frequency>' checks the '*.schedule'
config value for each enabled task to see if the configured frequency is
at least as frequent as the frequency from the '--schedule' argument. We
use the following order, for full clarity:
'hourly' > 'daily' > 'weekly'
Use new 'enum schedule_priority' to track these values numerically.
The following cron table would run the scheduled tasks with the correct
frequencies:
0 1-23 * * * git -C <repo> maintenance run --schedule=hourly
0 0 * * 1-6 git -C <repo> maintenance run --schedule=daily
0 0 * * 0 git -C <repo> maintenance run --schedule=weekly
This cron schedule will run --schedule=hourly every hour except at
midnight. This avoids a concurrent run with the --schedule=daily that
runs at midnight every day except the first day of the week. This avoids
a concurrent run with the --schedule=weekly that runs at midnight on
the first day of the week. Since --schedule=daily also runs the
'hourly' tasks and --schedule=weekly runs the 'hourly' and 'daily'
tasks, we will still see all tasks run with the proper frequencies.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some commands run 'git maintenance run --auto --[no-]quiet' after doing
their normal work, as a way to keep repositories clean as they are used.
Currently, users who do not want this maintenance to occur would set the
'gc.auto' config option to 0 to avoid the 'gc' task from running.
However, this does not stop the extra process invocation. On Windows,
this extra process invocation can be more expensive than necessary.
Allow users to drop this extra process by setting 'maintenance.auto' to
'false'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The incremental-repack task updates the multi-pack-index by deleting pack-
files that have been replaced with new packs, then repacking a batch of
small pack-files into a larger pack-file. This incremental repack is faster
than rewriting all object data, but is slower than some other
maintenance activities.
The 'maintenance.incremental-repack.auto' config option specifies how many
pack-files should exist outside of the multi-pack-index before running
the step. These pack-files could be created by 'git fetch' commands or
by the loose-objects task. The default value is 10.
Setting the option to zero disables the task with the '--auto' option,
and a negative value makes the task run every time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When repacking during the 'incremental-repack' task, we use the
--batch-size option in 'git multi-pack-index repack'. The initial setting
used --batch-size=0 to repack everything into a single pack-file. This is
not sustainable for a large repository. The amount of work required is
also likely to use too many system resources for a background job.
Update the 'incremental-repack' task by dynamically computing a
--batch-size option based on the current pack-file structure.
The dynamic default size is computed with this idea in mind for a client
repository that was cloned from a very large remote: there is likely one
"big" pack-file that was created at clone time. Thus, do not try
repacking it as it is likely packed efficiently by the server.
Instead, we select the second-largest pack-file, and create a batch size
that is one larger than that pack-file. If there are three or more
pack-files, then this guarantees that at least two will be combined into
a new pack-file.
Of course, this means that the second-largest pack-file size is likely
to grow over time and may eventually surpass the initially-cloned
pack-file. Recall that the pack-file batch is selected in a greedy
manner: the packs are considered from oldest to newest and are selected
if they have size smaller than the batch size until the total selected
size is larger than the batch size. Thus, that oldest "clone" pack will
be first to repack after the new data creates a pack larger than that.
We also want to place some limits on how large these pack-files become,
in order to bound the amount of time spent repacking. A maximum
batch-size of two gigabytes means that large repositories will never be
packed into a single pack-file using this job, but also that repack is
rather expensive. This is a trade-off that is valuable to have if the
maintenance is being run automatically or in the background. Users who
truly want to optimize for space and performance (and are willing to pay
the upfront cost of a full repack) can use the 'gc' task to do so.
Create a test for this two gigabyte limit by creating an EXPENSIVE test
that generates two pack-files of roughly 2.5 gigabytes in size, then
performs an incremental repack. Check that the --batch-size argument in
the subcommand uses the hard-coded maximum.
Helped-by: Chris Torek <chris.torek@gmail.com>
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change cleaned up loose objects using the
'loose-objects' that can be run safely in the background. Add a
similar job that performs similar cleanups for pack-files.
One issue with running 'git repack' is that it is designed to
repack all pack-files into a single pack-file. While this is the
most space-efficient way to store object data, it is not time or
memory efficient. This becomes extremely important if the repo is
so large that a user struggles to store two copies of the pack on
their disk.
Instead, perform an "incremental" repack by collecting a few small
pack-files into a new pack-file. The multi-pack-index facilitates
this process ever since 'git multi-pack-index expire' was added in
19575c7 (multi-pack-index: implement 'expire' subcommand,
2019-06-10) and 'git multi-pack-index repack' was added in ce1e4a1
(midx: implement midx_repack(), 2019-06-10).
The 'incremental-repack' task runs the following steps:
1. 'git multi-pack-index write' creates a multi-pack-index file if
one did not exist, and otherwise will update the multi-pack-index
with any new pack-files that appeared since the last write. This
is particularly relevant with the background fetch job.
When the multi-pack-index sees two copies of the same object, it
stores the offset data into the newer pack-file. This means that
some old pack-files could become "unreferenced" which I will use
to mean "a pack-file that is in the pack-file list of the
multi-pack-index but none of the objects in the multi-pack-index
reference a location inside that pack-file."
2. 'git multi-pack-index expire' deletes any unreferenced pack-files
and updaes the multi-pack-index to drop those pack-files from the
list. This is safe to do as concurrent Git processes will see the
multi-pack-index and not open those packs when looking for object
contents. (Similar to the 'loose-objects' job, there are some Git
commands that open pack-files regardless of the multi-pack-index,
but they are rarely used. Further, a user that self-selects to
use background operations would likely refrain from using those
commands.)
3. 'git multi-pack-index repack --bacth-size=<size>' collects a set
of pack-files that are listed in the multi-pack-index and creates
a new pack-file containing the objects whose offsets are listed
by the multi-pack-index to be in those objects. The set of pack-
files is selected greedily by sorting the pack-files by modified
time and adding a pack-file to the set if its "expected size" is
smaller than the batch size until the total expected size of the
selected pack-files is at least the batch size. The "expected
size" is calculated by taking the size of the pack-file divided
by the number of objects in the pack-file and multiplied by the
number of objects from the multi-pack-index with offset in that
pack-file. The expected size approximates how much data from that
pack-file will contribute to the resulting pack-file size. The
intention is that the resulting pack-file will be close in size
to the provided batch size.
The next run of the incremental-repack task will delete these
repacked pack-files during the 'expire' step.
In this version, the batch size is set to "0" which ignores the
size restrictions when selecting the pack-files. It instead
selects all pack-files and repacks all packed objects into a
single pack-file. This will be updated in the next change, but
it requires doing some calculations that are better isolated to
a separate change.
These steps are based on a similar background maintenance step in
Scalar (and VFS for Git) [1]. This was incredibly effective for
users of the Windows OS repository. After using the same VFS for Git
repository for over a year, some users had _thousands_ of pack-files
that combined to up to 250 GB of data. We noticed a few users were
running into the open file descriptor limits (due in part to a bug
in the multi-pack-index fixed by af96fe3 (midx: add packs to
packed_git linked list, 2019-04-29).
These pack-files were mostly small since they contained the commits
and trees that were pushed to the origin in a given hour. The GVFS
protocol includes a "prefetch" step that asks for pre-computed pack-
files containing commits and trees by timestamp. These pack-files
were grouped into "daily" pack-files once a day for up to 30 days.
If a user did not request prefetch packs for over 30 days, then they
would get the entire history of commits and trees in a new, large
pack-file. This led to a large number of pack-files that had poor
delta compression.
By running this pack-file maintenance step once per day, these repos
with thousands of packs spanning 200+ GB dropped to dozens of pack-
files spanning 30-50 GB. This was done all without removing objects
from the system and using a constant batch size of two gigabytes.
Once the work was done to reduce the pack-files to small sizes, the
batch size of two gigabytes means that not every run triggers a
repack operation, so the following run will not expire a pack-file.
This has kept these repos in a "clean" state.
[1] https://github.com/microsoft/scalar/blob/master/Scalar.Common/Maintenance/PackfileMaintenanceStep.cs
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loose-objects task deletes loose objects that already exist in a
pack-file, then place the remaining loose objects into a new pack-file.
If this step runs all the time, then we risk creating pack-files with
very few objects with every 'git commit' process. To prevent
overwhelming the packs directory with small pack-files, place a minimum
number of objects to justify the task.
The 'maintenance.loose-objects.auto' config option specifies a minimum
number of loose objects to justify the task to run under the '--auto'
option. This defaults to 100 loose objects. Setting the value to zero
will prevent the step from running under '--auto' while a negative value
will force it to run every time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One goal of background maintenance jobs is to allow a user to
disable auto-gc (gc.auto=0) but keep their repository in a clean
state. Without any cleanup, loose objects will clutter the object
database and slow operations. In addition, the loose objects will
take up extra space because they are not stored with deltas against
similar objects.
Create a 'loose-objects' task for the 'git maintenance run' command.
This helps clean up loose objects without disrupting concurrent Git
commands using the following sequence of events:
1. Run 'git prune-packed' to delete any loose objects that exist
in a pack-file. Concurrent commands will prefer the packed
version of the object to the loose version. (Of course, there
are exceptions for commands that specifically care about the
location of an object. These are rare for a user to run on
purpose, and we hope a user that has selected background
maintenance will not be trying to do foreground maintenance.)
2. Run 'git pack-objects' on a batch of loose objects. These
objects are grouped by scanning the loose object directories in
lexicographic order until listing all loose objects -or-
reaching 50,000 objects. This is more than enough if the loose
objects are created only by a user doing normal development.
We noticed users with _millions_ of loose objects because VFS
for Git downloads blobs on-demand when a file read operation
requires populating a virtual file.
This step is based on a similar step in Scalar [1] and VFS for Git.
[1] https://github.com/microsoft/scalar/blob/master/Scalar.Common/Maintenance/LooseObjectsStep.cs
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working with very large repositories, an incremental 'git fetch'
command can download a large amount of data. If there are many other
users pushing to a common repo, then this data can rival the initial
pack-file size of a 'git clone' of a medium-size repo.
Users may want to keep the data on their local repos as close as
possible to the data on the remote repos by fetching periodically in
the background. This can break up a large daily fetch into several
smaller hourly fetches.
The task is called "prefetch" because it is work done in advance
of a foreground fetch to make that 'git fetch' command much faster.
However, if we simply ran 'git fetch <remote>' in the background,
then the user running a foreground 'git fetch <remote>' would lose
some important feedback when a new branch appears or an existing
branch updates. This is especially true if a remote branch is
force-updated and this isn't noticed by the user because it occurred
in the background. Further, the functionality of 'git push
--force-with-lease' becomes suspect.
When running 'git fetch <remote> <options>' in the background, use
the following options for careful updating:
1. --no-tags prevents getting a new tag when a user wants to see
the new tags appear in their foreground fetches.
2. --refmap= removes the configured refspec which usually updates
refs/remotes/<remote>/* with the refs advertised by the remote.
While this looks confusing, this was documented and tested by
b40a50264ac (fetch: document and test --refmap="", 2020-01-21),
including this sentence in the documentation:
Providing an empty `<refspec>` to the `--refmap` option
causes Git to ignore the configured refspecs and rely
entirely on the refspecs supplied as command-line arguments.
3. By adding a new refspec "+refs/heads/*:refs/prefetch/<remote>/*"
we can ensure that we actually load the new values somewhere in
our refspace while not updating refs/heads or refs/remotes. By
storing these refs here, the commit-graph job will update the
commit-graph with the commits from these hidden refs.
4. --prune will delete the refs/prefetch/<remote> refs that no
longer appear on the remote.
5. --no-write-fetch-head prevents updating FETCH_HEAD.
We've been using this step as a critical background job in Scalar
[1] (and VFS for Git). This solved a pain point that was showing up
in user reports: fetching was a pain! Users do not like waiting to
download the data that was created while they were away from their
machines. After implementing background fetch, the foreground fetch
commands sped up significantly because they mostly just update refs
and download a small amount of new data. The effect is especially
dramatic when paried with --no-show-forced-udpates (through
fetch.showForcedUpdates=false).
[1] https://github.com/microsoft/scalar/blob/master/Scalar.Common/Maintenance/FetchStep.cs
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git maintenance run' command has an '--auto' option. This is used
by other Git commands such as 'git commit' or 'git fetch' to check if
maintenance should be run after adding data to the repository.
Previously, this --auto option was only used to add the argument to the
'git gc' command as part of the 'gc' task. We will be expanding the
other tasks to perform a check to see if they should do work as part of
the --auto flag, when they are enabled by config.
First, update the 'gc' task to perform the auto check inside the
maintenance process. This prevents running an extra 'git gc --auto'
command when not needed. It also shows a model for other tasks.
Second, use the 'auto_condition' function pointer as a signal for
whether we enable the maintenance task under '--auto'. For instance, we
do not want to enable the 'fetch' task in '--auto' mode, so that
function pointer will remain NULL.
Now that we are not automatically calling 'git gc', a test in
t5514-fetch-multiple.sh must be changed to watch for 'git maintenance'
instead.
We continue to pass the '--auto' option to the 'git gc' command when
necessary, because of the gc.autoDetach config option changes behavior.
Likely, we will want to absorb the daemonizing behavior implied by
gc.autoDetach as a maintenance.autoDetach config option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, a normal run of "git maintenance run" will only run the 'gc'
task, as it is the only one enabled. This is mostly for backwards-
compatible reasons since "git maintenance run --auto" commands replaced
previous "git gc --auto" commands after some Git processes. Users could
manually run specific maintenance tasks by calling "git maintenance run
--task=<task>" directly.
Allow users to customize which steps are run automatically using config.
The 'maintenance.<task>.enabled' option then can turn on these other
tasks (or turn off the 'gc' task).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user may want to only run certain maintenance tasks in a certain
order. Add the --task=<task> option, which allows a user to specify an
ordered list of tasks to run. These cannot be run multiple times,
however.
Here is where our array of maintenance_task pointers becomes critical.
We can sort the array of pointers based on the task order, but we do not
want to move the struct data itself in order to preserve the hashmap
references. We use the hashmap to match the --task=<task> arguments into
the task struct data.
Keep in mind that the 'enabled' member of the maintenance_task struct is
a placeholder for a future 'maintenance.<task>.enabled' config option.
Thus, we use the 'enabled' member to specify which tasks are run when
the user does not specify any --task=<task> arguments. The 'enabled'
member should be ignored if --task=<task> appears.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first new task in the 'git maintenance' builtin is the
'commit-graph' task. This updates the commit-graph file
incrementally with the command
git commit-graph write --reachable --split
By writing an incremental commit-graph file using the "--split"
option we minimize the disruption from this operation. The default
behavior is to merge layers until the new "top" layer is less than
half the size of the layer below. This provides quick writes most
of the time, with the longer writes following a power law
distribution.
Most importantly, concurrent Git processes only look at the
commit-graph-chain file for a very short amount of time, so they
will verly likely not be holding a handle to the file when we try
to replace it. (This only matters on Windows.)
If a concurrent process reads the old commit-graph-chain file, but
our job expires some of the .graph files before they can be read,
then those processes will see a warning message (but not fail).
This could be avoided by a future update to use the --expire-time
argument when writing the commit-graph.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintenance activities are commonly used as steps in larger scripts.
Providing a '--quiet' option allows those scripts to be less noisy when
run on a terminal window. Turn this mode on by default when stderr is
not a terminal.
Pipe the option to the 'git gc' child process.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'gc' builtin is our current entrypoint for automatically maintaining
a repository. This one tool does many operations, such as repacking the
repository, packing refs, and rewriting the commit-graph file. The name
implies it performs "garbage collection" which means several different
things, and some users may not want to use this operation that rewrites
the entire object database.
Create a new 'maintenance' builtin that will become a more general-
purpose command. To start, it will only support the 'run' subcommand,
but will later expand to add subcommands for scheduling maintenance in
the background.
For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin.
In fact, the only option is the '--auto' toggle, which is handed
directly to the 'gc' builtin. The current change is isolated to this
simple operation to prevent more interesting logic from being lost in
all of the boilerplate of adding a new builtin.
Use existing builtin/gc.c file because we want to share code between the
two builtins. It is possible that we will have 'maintenance' replace the
'gc' builtin entirely at some point, leaving 'git gc' as an alias for
some specific arguments to 'git maintenance run'.
Create a new test_subcommand helper that allows us to test if a certain
subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a
file. A negation mode is available that will be used in later tests.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Junio C Hamano
Han-Wen Nienhuys
Eric Sunshine
Martin Ågren
Josh Steadmon
Jeff King
Rafael Silva