summaryrefslogtreecommitdiff
path: root/t/t7810-grep.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03grep: add -r/--[no-]recursiveLibravatar René Scharfe1-0/+12
Recognize -r and --recursive as synonyms for --max-depth=-1 for compatibility with GNU grep; it's still the default for git grep. This also adds --no-recursive as synonym for --max-depth=0 for free, which is welcome for completeness and consistency. Fix the description for --max-depth, while we're at it -- negative values other than -1 actually disable recursion, i.e. they are equivalent to --max-depth=0. Requested-by: Christoph Berg <myon@debian.org> Suggested-by: Junio C Hamano <gitster@pobox.com> Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-27Merge branch 'sg/test-must-be-empty'Libravatar Junio C Hamano1-22/+13
Test fixes. * sg/test-must-be-empty: tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>' tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>' tests: use 'test_must_be_empty' instead of 'test ! -s' tests: use 'test_must_be_empty' instead of '! test -s'
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'Libravatar SZEDER Gábor1-20/+11
Using 'test_must_be_empty' is shorter and more idiomatic than >empty && test_cmp empty out as it saves the creation of an empty file. Furthermore, sometimes the expected empty file doesn't have such a descriptive name like 'empty', and its creation is far away from the place where it's finally used for comparison (e.g. in 't7600-merge.sh', where two expected empty files are created in the 'setup' test, but are used only about 500 lines later). These cases were found by instrumenting 'test_cmp' to error out the test script when it's used to compare empty files, and then converted manually. Note that even after this patch there still remain a lot of cases where we use 'test_cmp' to check empty files: - Sometimes the expected output is not hard-coded in the test, but 'test_cmp' is used to ensure that two similar git commands produce the same output, and that output happens to be empty, e.g. the test 'submodule update --merge - ignores --merge for new submodules' in 't7406-submodule-update.sh'. - Repetitive common tasks, including preparing the expected results and running 'test_cmp', are often extracted into a helper function, and some of this helper's callsites expect no output. - For the same reason as above, the whole 'test_expect_success' block is within a helper function, e.g. in 't3070-wildmatch.sh'. - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update (-p)' in 't9400-git-cvsserver-server.sh'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'Libravatar SZEDER Gábor1-1/+1
Using 'test_must_be_empty' is more idiomatic than 'test_cmp /dev/null out', and its message on error is perhaps a bit more to the point. This patch was basically created by running: sed -i -e 's%test_cmp /dev/null%test_must_be_empty%' t[0-9]*.sh with the exception of the change in 'should not fail in an empty repo' in 't7401-submodule-summary.sh', where it was 'test_cmp output /dev/null'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21tests: use 'test_must_be_empty' instead of '! test -s'Libravatar SZEDER Gábor1-1/+1
Using 'test_must_be_empty' is preferable to '! test -s', because it gives a helpful error message if the given file is unexpectedly not empty, while the latter remains completely silent. Furthermore, it also catches cases when the given file unexpectedly does not exist at all. This patch was basically created by: sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh with the following notable exceptions: - The '! test -s' check in '.gitmodules ignore=dirty suppresses submodules with untracked content' in 't7508-status.sh' is left as-is, because it's bogus and, therefore, it's subject of a dedicated patch. - The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and 't9135-git-svn-moved-branch-empty-file.sh' are immediately preceeded by a 'test -f' to ensure that the files exist in the first place. 'test_must_be_empty' ensures that as well, so those 'test -f' commands are removed as well. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20Merge branch 'ab/test-must-be-empty-for-master'Libravatar Junio C Hamano1-2/+1
Test updates. * ab/test-must-be-empty-for-master: tests: make use of the test_must_be_empty function
2018-08-02Merge branch 'tb/grep-only-matching'Libravatar Junio C Hamano1-0/+15
"git grep" learned the "--only-matching" option. * tb/grep-only-matching: grep.c: teach 'git grep --only-matching' grep.c: extract show_line_header()
2018-08-02Merge branch 'es/test-fixes'Libravatar Junio C Hamano1-4/+3
Test clean-up and corrections. * es/test-fixes: (26 commits) t5608: fix broken &&-chain t9119: fix broken &&-chains t9000-t9999: fix broken &&-chains t7000-t7999: fix broken &&-chains t6000-t6999: fix broken &&-chains t5000-t5999: fix broken &&-chains t4000-t4999: fix broken &&-chains t3030: fix broken &&-chains t3000-t3999: fix broken &&-chains t2000-t2999: fix broken &&-chains t1000-t1999: fix broken &&-chains t0000-t0999: fix broken &&-chains t9814: simplify convoluted check that command correctly errors out t9001: fix broken "invoke hook" test t7810: use test_expect_code() instead of hand-rolled comparison t7400: fix broken "submodule add/reconfigure --force" test t7201: drop pointless "exit 0" at end of subshell t6036: fix broken "merge fails but has appropriate contents" tests t5505: modernize and simplify hard-to-digest test t5406: use write_script() instead of birthing shell script manually ...
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-2/+1
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16t7810: use test_expect_code() instead of hand-rolled comparisonLibravatar Eric Sunshine1-4/+3
This test manually checks the exit code of git-grep for a particular value. In doing so, it intentionally breaks the &&-chain. Modernize the test by taking advantage of test_expect_code() and a normal &&-chain. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-09grep.c: teach 'git grep --only-matching'Libravatar Taylor Blau1-0/+15
Teach 'git grep --only-matching', a new option to only print the matching part(s) of a line. For instance, a line containing the following (taken from README.md:27): (`man gitcvs-migration` or `git help cvs-migration` if git is Is printed as follows: $ git grep --line-number --column --only-matching -e git -- \ README.md | grep ":27" README.md:27:7:git README.md:27:16:git README.md:27:38:git The patch works mostly as one would expect, with the exception of a few considerations that are worth mentioning here. Like GNU grep, this patch ignores --only-matching when --invert (-v) is given. There is a sensible answer here, but parity with the behavior of other tools is preferred. Because a line might contain more than one match, there are special considerations pertaining to when to print line headers, newlines, and how to increment the match column offset. The line header and newlines are handled as a special case within the main loop to avoid polluting the surrounding code with conditionals that have large blocks. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-22builtin/grep.c: add '--column' option to 'git-grep(1)'Libravatar Taylor Blau1-0/+95
Teach 'git-grep(1)' a new option, '--column', to show the column number of the first match on a non-context line. This makes it possible to teach 'contrib/git-jump/git-jump' how to seek to the first matching position of a grep match in your editor, and allows similar additional scripting capabilities. For example: $ git grep -n --column foo | head -n3 .clang-format:51:14:# myFunction(foo, bar, baz); .clang-format:64:7:# int foo(); .clang-format:75:8:# void foo() Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-13Merge branch 'ab/pcre2-grep'Libravatar Junio C Hamano1-0/+6
"git grep" compiled with libpcre2 sometimes triggered a segfault, which is being fixed. * ab/pcre2-grep: grep: fix segfault under -P + PCRE2 <=10.30 + (*NO_JIT) test-lib: add LIBPCRE1 & LIBPCRE2 prerequisites
2017-11-24grep: fix segfault under -P + PCRE2 <=10.30 + (*NO_JIT)Libravatar Ævar Arnfjörð Bjarmason1-0/+6
Fix a bug in the compilation of PCRE2 patterns under JIT (the most common runtime configuration). Any pattern with a (*NO_JIT) verb would segfault in any currently released PCRE2 version: $ git grep -P '(*NO_JIT)hi.*there' Segmentation fault That this segfaulted was a bug in PCRE2 itself, after reporting it[1] on pcre-dev it's been fixed in a yet-to-be-released version of PCRE (presumably released first as 10.31). Now it'll die with: $ git grep -P '(*NO_JIT)hi.*there' fatal: pcre2_jit_match failed with error code -45: bad JIT option But the cause of the bug is in our own code dating back to my 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01). As explained at more length in the comment being added here, it isn't sufficient to just check pcre2_config() to see whether the JIT should be used, pcre2_pattern_info() also has to be asked. This is something I discovered myself when fiddling around with PCRE2 verbs in patterns passed to git. I don't expect that any user of git has encountered this given the obscurity of passing PCRE2 verbs through to the library, along with the relative obscurity of (*NO_JIT) itself. 1. "How am I supposed to use PCRE2 JIT in the face of (*NO_JIT) ?" (<CACBZZX5mMqDuWuFmi7sRBp3wH6CFyd-ghACukd=v0NN=rBMnJg@mail.gmail.com> & https://lists.exim.org/lurker/thread/20171123.101502.7f0d38ca.en.html) on the pcre-dev mailing list Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-21grep: show non-empty lines before functions with -WLibravatar René Scharfe1-1/+1
Non-empty lines before a function definition are most likely comments for that function and thus relevant. Include them in function context. Such a non-empty line might also belong to the preceding function if there is no separating blank line. Stop extending the context upwards also at the next function line to make sure only one extra function body is shown at most. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-21t7810: improve check of -W with user-defined function linesLibravatar René Scharfe1-10/+31
The check for function context (-W) together with user-defined function line patterns reuses hello.c and pretends it's written in a language in which function lines contain either "printf" or a trailing curly brace. That's a bit obscure. Make the test easier to read by adding a small PowerShell script, using a simple, but meaningful expression, and separating out checks for different aspects into dedicated tests instead of simply matching the whole output byte for byte. Also include a test for showing comments before function lines like git Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-23Merge branch 'as/grep-quiet-no-match-exit-code-fix'Libravatar Junio C Hamano1-0/+5
"git grep -L" and "git grep --quiet -L" reported different exit codes; this has been corrected. * as/grep-quiet-no-match-exit-code-fix: git-grep: correct exit code with --quiet and -L
2017-08-17git-grep: correct exit code with --quiet and -LLibravatar Anthony Sottile1-0/+5
The handling of `status_only` no longer interferes with the handling of `unmatch_name_only`. `--quiet` no longer affects the exit code when using `-L`/`--files-without-match`. Signed-off-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-26grep: given --threads with NO_PTHREADS=YesPlease, warnLibravatar Ævar Arnfjörð Bjarmason1-0/+18
Add a warning about missing thread support when grep.threads or --threads is set to a non 0 (default) or 1 (no parallelism) value under NO_PTHREADS=YesPlease. This is for consistency with the index-pack & pack-objects commands, which also take a --threads option & are configurable via pack.threads, and have long warned about the same under NO_PTHREADS=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: add tests for --threads=N and grep.threadsLibravatar Ævar Arnfjörð Bjarmason1-0/+16
Add tests for --threads=N being supplied on the command-line, or when grep.threads=N being supplied in the configuration. When the threading support was made run-time configurable in commit 89f09dd34e ("grep: add --threads=<num> option and grep.threads configuration", 2015-12-15) no tests were added for it. In developing a change to the grep code I was able to make '--threads=1 <pat>` segfault, while the test suite still passed. This change fixes that blind spot in the tests. In addition to asserting that asking for N threads shouldn't segfault, test that the grep output given any N is the same. The choice to test only 1..10 as opposed to 1..8 or 1..16 or whatever is arbitrary. Testing 1..1024 works locally for me (but gets noticeably slower as more threads are spawned). Given the structure of the code there's no reason to test an arbitrary number of threads, only 0, 1 and >=2 are special modes of operation. A later patch introduces a PTHREADS test prerequisite which is true under NO_PTHREADS=UnfortunatelyYes, but even under NO_PTHREADS it's fine to test --threads=N, we'll just ignore it and not use threading. So these tests also make sense under that mode to assert that --threads=N without pthreads still returns expected results. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: add a test for backreferences in PCRE patternsLibravatar Ævar Arnfjörð Bjarmason1-0/+7
Add a test for backreferences such as (.)\1 in PCRE patterns. This test ensures that the PCRE_NO_AUTO_CAPTURE option isn't turned on. Before this change turning it on would break these sort of patterns, but wouldn't break any tests. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: add a test asserting that --perl-regexp dies when !PCRELibravatar Ævar Arnfjörð Bjarmason1-0/+12
Add a test asserting that when --perl-regexp (and -P for grep) is given to git-grep & git-log that we die with an error. In developing the PCRE v2 series I introduced a regression where -P would (through control-flow fall-through) become synonymous with basic POSIX matching. I.e. 'git grep -P '[\d]' would match "d" instead of digits. The entire test suite would still pass with this serious regression, since everything that tested for --perl-regexp would be guarded by the PCRE prerequisite, fix that blind-spot by adding tests under !PCRE asserting that git must die when given --perl-regexp or -P. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21test-lib: rename the LIBPCRE prerequisite to PCRELibravatar Ævar Arnfjörð Bjarmason1-14/+14
Rename the LIBPCRE prerequisite to PCRE. This is for preparation for libpcre2 support, where having just "LIBPCRE" would be confusing as it implies v1 of the library. None of these tests are incompatible between versions 1 & 2 of libpcre, it's less confusing to give them a more general name to make it clear that they work on both library versions. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-14grep: treat revs the same for --untracked as for --no-indexLibravatar Jeff King1-1/+1
git-grep has always disallowed grepping in a tree (as opposed to the working directory) with both --untracked and --no-index. But we traditionally did so by first collecting the revs, and then complaining when any were provided. The --no-index option recently learned to detect revs much earlier. This has two user-visible effects: - we don't bother to resolve revision names at all. So when there's a rev/path ambiguity, we always choose to treat it as a path. - likewise, when you do specify a revision without "--", the error you get is "no such path" and not "--untracked cannot be used with revs". The rationale for doing this with --no-index is that it is meant to be used outside a repository, and so parsing revs at all does not make sense. This patch gives --untracked the same treatment. While it _is_ meant to be used in a repository, it is explicitly about grepping the non-repository contents. Telling the user "we found a rev, but you are not allowed to use revs" is not really helpful compared to "we treated your argument as a path, and could not find it". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-14grep: do not diagnose misspelt revs with --no-indexLibravatar Jeff King1-0/+5
If we are using --no-index, then our arguments cannot be revs in the first place. Not only is it pointless to diagnose them, but if we are not in a repository, we should not be trying to resolve any names. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-14grep: avoid resolving revision names in --no-index caseLibravatar Jeff King1-0/+13
We disallow the use of revisions with --no-index, but we don't actually check and complain until well after we've parsed the revisions. This is the cause of a few problems: 1. We shouldn't be calling get_sha1() at all when we aren't in a repository, as it might access the ref or object databases. For now, this should generally just return failure, but eventually it will become a BUG(). 2. When there's a "--" disambiguator and you're outside a repository, we'll complain early with "unable to resolve revision". But we can give a much more specific error. 3. When there isn't a "--" disambiguator, we still do the normal rev/path checks. This is silly, as we know we cannot have any revs with --no-index. Everything we see must be a path. Outside of a repository this doesn't matter (since we know it won't resolve), but inside one, we may complain unnecessarily if a filename happens to also match a refname. This patch skips the get_sha1() call entirely in the no-index case, and behaves as if it failed (with the exception of giving a better error message). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-14grep: fix "--" rev/pathspec disambiguationLibravatar Jeff King1-0/+33
If we see "git grep pattern rev -- file" then we apply the usual rev/pathspec disambiguation rules: any "rev" before the "--" must be a revision, and we do not need to apply the verify_non_filename() check. But there are two bugs here: 1. We keep a seen_dashdash flag to handle this case, but we set it in the same left-to-right pass over the arguments in which we parse "rev". So when we see "rev", we do not yet know that there is a "--", and we mistakenly complain if there is a matching file. We can fix this by making a preliminary pass over the arguments to find the "--", and only then checking the rev arguments. 2. If we can't resolve "rev" but there isn't a dashdash, that's OK. We treat it like a path, and complain later if it doesn't exist. But if there _is_ a dashdash, then we know it must be a rev, and should treat it as such, complaining if it does not resolve. The current code instead ignores it and tries to treat it like a path. This patch fixes both bugs, and tries to comment the parsing flow a bit better. It adds tests that cover the two bugs, but also some related situations (which already worked, but this confirms that our fixes did not break anything). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-14grep: do not unnecessarily query repo for "--"Libravatar Jonathan Tan1-0/+15
When running a command of the form git grep --no-index pattern -- path in the absence of a Git repository, an error message will be printed: fatal: BUG: setup_git_env called without repository This is because "git grep" tries to interpret "--" as a rev. "git grep" has always tried to first interpret "--" as a rev for at least a few years, but this issue was upgraded from a pessimization to a bug in commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which calls get_sha1 regardless of whether --no-index was specified. This bug appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind fall-back to ".git"", 2016-10-20) when Git was taught to die in this situation. (This "git grep" bug appears to be one of the bugs that commit b1ef400 is meant to flush out.) Therefore, always interpret "--" as signaling the end of options, instead of trying to interpret it as a rev first. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23Merge branch 'jk/grep-e-could-be-extended-beyond-posix'Libravatar Junio C Hamano1-11/+15
Tighten a test to avoid mistaking an extended ERE regexp engine as a PRE regexp engine. * jk/grep-e-could-be-extended-beyond-posix: t7810: avoid assumption about invalid regex syntax
2017-01-11t7810: avoid assumption about invalid regex syntaxLibravatar Jeff King1-11/+15
A few of the tests want to check that "git grep -P -E" will override -P with -E, and vice versa. To do so, we use a regex with "\x{..}", which is valid in PCRE but not defined by POSIX (for basic or extended regular expressions). However, POSIX declares quite a lot of syntax, including "\x", as "undefined". That leaves implementations free to extend the standard if they choose. At least one, musl libc, implements "\x" in the same way as PCRE. Our tests check that "-E" complains about "\x", which fails with musl. We can fix this by finding some construct which behaves reliably on both PCRE and POSIX, but differently in each system. One such construct is the use of backslash inside brackets. In PCRE, "[\d]" interprets "\d" as it would outside the brackets, matching a digit. Whereas in POSIX, the backslash must be treated literally, and we match either it or a literal "d". Moreover, implementations are not free to change this according to POSIX, so we should be able to rely on it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11Spelling fixesLibravatar Ville Skyttä1-1/+1
<BAD> <CORRECTED> accidently accidentally commited committed dependancy dependency emtpy empty existance existence explicitely explicitly git-upload-achive git-upload-archive hierachy hierarchy indegee indegree intial initial mulitple multiple non-existant non-existent precendence. precedence. priviledged privileged programatically programmatically psuedo-binary pseudo-binary soemwhere somewhere successfull successful transfering transferring uncommited uncommitted unkown unknown usefull useful writting writing Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-13Merge branch 'nd/ita-cleanup'Libravatar Junio C Hamano1-1/+59
Git does not know what the contents in the index should be for a path added with "git add -N" yet, so "git grep --cached" should not show hits (or show lack of hits, with -L) in such a path, but that logic does not apply to "git grep", i.e. searching in the working tree files. But we did so by mistake, which has been corrected. * nd/ita-cleanup: grep: fix grepping for "intent to add" files t7810-grep.sh: fix a whitespace inconsistency t7810-grep.sh: fix duplicated test name
2016-07-06Merge branch 'cb/t7810-test-label-fix'Libravatar Junio C Hamano1-1/+1
Test clean-up. * cb/t7810-test-label-fix: t7810: fix duplicated test title
2016-07-01grep: fix grepping for "intent to add" filesLibravatar Charles Bailey1-0/+58
This reverts commit 4d5520053 (grep: make it clear i-t-a entries are ignored, 2015-12-27) and adds an alternative fix to maintain the -L --cached behavior. 4d5520053 caused 'git grep' to no longer find matches in new files in the working tree where the corresponding index entry had the "intent to add" bit set, despite the fact that these files are tracked. The content in the index of a file for which the "intent to add" bit is set is considered indeterminate and not empty. For most grep queries we want these to behave the same, however for -L --cached (files without a match) we don't want to respond positively for "intent to add" files as their contents are indeterminate. This is in contrast to files with empty contents in the index (no lines implies no matches for any grep query expression) which should be reported in the output of a grep -L --cached invocation. Add tests to cover this case and a few related cases which previously lacked coverage. Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01t7810-grep.sh: fix a whitespace inconsistencyLibravatar Charles Bailey1-1/+1
Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01t7810-grep.sh: fix duplicated test nameLibravatar Charles Bailey1-1/+1
Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-21t7810: fix duplicated test titleLibravatar Charles Bailey1-1/+1
Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-20Merge branch 'rs/xdiff-hunk-with-func-line'Libravatar Junio C Hamano1-3/+16
"git show -W" (extend hunks to cover the entire function, delimited by lines that match the "funcname" pattern) used to show the entire file when a change added an entire function at the end of the file, which has been fixed. * rs/xdiff-hunk-with-func-line: xdiff: fix merging of appended hunk with -W grep: -W: don't extend context to trailing empty lines t7810: add test for grep -W and trailing empty context lines xdiff: don't trim common tail with -W xdiff: -W: don't include common trailing empty lines in context xdiff: ignore empty lines before added functions with -W xdiff: handle appended chunks better with -W xdiff: factor out match_func_rec() t4051: rewrite, add more tests
2016-05-31grep: -W: don't extend context to trailing empty linesLibravatar René Scharfe1-1/+1
Empty lines between functions are shown by grep -W, as it considers them to be part of the function preceding them. They are not interesting in most languages. The previous patches stopped showing them for diff -W. Stop showing empty lines trailing a function with grep -W. Grep scans the lines of a buffer from top to bottom and prints matching lines immediately. Thus we need to peek ahead in order to determine if an empty line is part of a function body and worth showing or not. Remember how far ahead we peeked in order to avoid having to do so repeatedly when handling multiple consecutive empty lines. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-31t7810: add test for grep -W and trailing empty context linesLibravatar René Scharfe1-3/+16
Add a test demonstrating that git grep -W prints empty lines following the function context we're actually interested in. The modified test file makes it necessary to adjust three unrelated test cases. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-07grep: turn off gitlink detection for --no-indexLibravatar Jeff King1-0/+27
If we are running "git grep --no-index" outside of a git repository, we behave roughly like "grep -r", examining all files in the current directory and its subdirectories. However, because we use fill_directory() to do the recursion, it will skip over any directories which look like sub-repositories. For a normal git operation (like "git grep" in a repository) this makes sense; we do not want to cross the boundary out of our current repository into a submodule. But for "--no-index" without a repository, we should look at all files, including embedded repositories. There is one exception, though: we probably should _not_ descend into ".git" directories. Doing so is inefficient and unlikely to turn up useful hits. This patch drops our use of dir.c's gitlink-detection, but we do still avoid ".git". That makes us more like tools such as "ack" or "ag", which also know to avoid cruft in .git. As a bonus, this also drops our usage of the ref code when we are outside of a repository, making the transition to pluggable ref backends cleaner. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-12builtin/grep: add grep.fallbackToNoIndex configLibravatar Thomas Gummerer1-0/+41
Currently when git grep is used outside of a git repository without the --no-index option git simply dies. For convenience, add a grep.fallbackToNoIndex configuration variable. If set to true, git grep behaves like git grep --no-index if it is run outside of a git repository. It defaults to false, preserving the current behavior. Helped-by: Jeff King <peff@peff.net> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-11t7810: correct --no-index testLibravatar Thomas Gummerer1-4/+4
GIT_CEILING_DIRECTORIES doesn't prevent chdir up into another directory while looking for a repository directory if it is equal to the current directory. Because of this, the test which claims to test the git grep --no-index command outside of a repository actually tests it inside of a repository. The test_must_fail assertions still pass because the git grep only looks at untracked files and therefore no file matches, but not because it's run outside of a repository as it was originally intended. Set the GIT_CEILING_DIRECTORIES environment variable to the parent directory of the directory in which the git grep command is executed, to make sure it is actually run outside of a git repository. In addition, the && chain was broken in a couple of places in the same test, fix that. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-31Merge branch 'rs/grep-color-words'Libravatar Junio C Hamano1-0/+94
Allow painting or not painting (partial) matches in context lines when showing "grep -C<num>" output in color. * rs/grep-color-words: grep: add color.grep.matchcontext and color.grep.matchselected
2014-10-28grep: add color.grep.matchcontext and color.grep.matchselectedLibravatar René Scharfe1-0/+94
The config option color.grep.match can be used to specify the highlighting color for matching strings. Add the options matchContext and matchSelected to allow different colors to be specified for matching strings in the context vs. in selected lines. This is similar to the ms and mc specifiers in GNU grep's environment variable GREP_COLORS. Tests are from Zoltan Klinger's earlier attempt to solve the same issue in a different way. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-05t/t7810-grep.sh: remove duplicate test_config()Libravatar Jeremiah Mahler1-5/+0
t/t7810-grep.sh had its own test_config() function which served the same purpose as the one in t/test-lib-functions.sh. Removed, all tests pass. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-11grep: support -h (no header) with --countLibravatar René Scharfe1-0/+12
Suppress printing the header (filename) with -h even if in -c/--count mode. GNU grep and OpenBSD's grep do the same. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-11t7810: add missing variables to tests in loopLibravatar René Scharfe1-29/+29
Some tests in t7810-grep.sh are in a loop that runs them against HEAD and the work tree. In order for that to work the test code should use the variables $L (display name), $H (HEAD or empty string) and $HC (revision prefix for result lines); otherwise tests are just repeated with the same target. Add the variables where they're missing and make sure the test description is wrapped in double quotes (instead of single quotes) to allow variables to be expanded. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-29log --grep-reflog: reject the option without -gLibravatar Junio C Hamano1-0/+4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-29revision: add --grep-reflog to filter commits by reflog messagesLibravatar Nguyễn Thái Ngọc Duy1-0/+26
Similar to --author/--committer which filters commits by author and committer header fields. --grep-reflog adds a fake "reflog" header to commit and a grep filter to search on that line. All rules to --author/--committer apply except no timestamp stripping. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>