| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The temporary directory prepared by "difftool --dir-diff" to
show the result of a change can be modified by the user via
the tree diff program, and we try hard not to lose changes
to them after tree diff program returns to us.
However, the set of files to be copied back is computed
differently between --symlinks and --no-symlinks modes. The
former checks all paths that start out as identical to the
working tree file, while the latter checks paths that
already had a local modification in the working tree,
allowing changes made in the tree diff program to paths that
did not have any local change to be lost.
Signed-off-by: Kenichi Saita <nitoyon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 02c5631 (difftool --dir-diff: symlink all files matching the
working tree, 2013-03-14) does not handle the case where a file that is
being compared does not exist in the working tree. Fix this by checking
for existence explicitly before running git-hash-object.
Reported-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the difftool --dir-diff tests may or may not use symlinks
depending on the operating system on which they are run. In one case
this has caused a test failure to be noticed only on Windows when the
test also fails on Linux when difftool is invoked with --no-symlinks.
Rewrite these tests so that they do not depend on the environment but
run explicitly with both --symlinks and --no-symlinks, protecting the
--symlinks version with a SYMLINKS prerequisite.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git difftool --dir-diff' is using --no-symlinks (either explicitly
or implicitly because it's running on Windows), any working tree files
that have been copied to the temporary directory are copied back after
the difftool completes.
Because an earlier test uses "git add .", the "output" file used by
tests is tracked by Git and the following sequence occurs during some
tests:
1) the shell opens "output" to redirect the difftool output
2) difftool copies the empty "output" to the temporary directory
3) difftool runs "ls" which writes to "output"
4) difftool copies the empty "output" file back over the output of the
command
5) the output file doesn't contain the expected output, causing the
test to fail
Instead of adding all changes, explicitly add only the files that the
test is using, allowing later tests to write their result files into the
working tree.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the stdin_contains and stdin_doesnt_contain helper functions
which add nothing but hide the output of grep, hurting debugging.
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After running the user's diff tool, git-difftool will copy any files
that differ between the working tree and the temporary tree. This is
useful when the user edits the file in their diff tool but is wrong if
they edit the working tree file while examining the diff.
Instead of copying unconditionally when the files differ, create and
index from the working tree files and only copy the temporary file back
if it was modified and the working tree file was not. If both files
have been modified, print a warning and exit with an error.
Note that we cannot use an existing index in git-difftool since those
contain the modified files that need to be checked out but here we are
looking at those files which are copied from the working tree and not
checked out. These are precisely the files which are not in the
existing indices.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will group the tests more logically when we introduce a helper to
run most --dir-diff tests with both --symlinks and --no-symlinks.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git difftool --dir-diff" made symlinks to working tree files when
preparing a temporary directory structure, so that accidental edits
of these files in the difftool are reflected back to the working
tree, but the logic to decide when to do so was not quite right.
* jk/difftool-dir-diff-edit-fix:
difftool --dir-diff: symlink all files matching the working tree
difftool: avoid double slashes in symlink targets
git-difftool(1): fix formatting of --symlink description
|
|
Some users like to edit files in their diff tool when using "git
difftool --dir-diff --symlink" to compare against the working tree but
difftool currently only created symlinks when a file contains unstaged
changes.
Change this behaviour so that symlinks are created whenever the
right-hand side of the comparison has the same SHA1 as the file in the
working tree.
Note that textconv filters are handled in the same way as by git-diff
and if a clean filter is not the inverse of its smudge filter we already
get a null SHA1 from "diff --raw" and will symlink the file without
going through the new hash-object based check.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
073678b8e6324a155fa99f40eee0637941a70a34 reworked the
mergetools/ directory so that every file corresponds to a
difftool-supported tool. When this happened the "defaults"
file went away as it was no longer needed by mergetool--lib.
t7800 tests that configured commands can override builtins,
but this test was not adjusted when the "defaults" file was
removed because the test continued to pass.
Adjust the test to use the everlasting "vimdiff" tool name
instead of "defaults" so that it correctly tests against a tool
that is known by mergetool--lib.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eliminate a lot of redundant work by using test_config().
Catch more return codes by more use of temporary files
and test_cmp.
The original tests relied upon restore_test_defaults()
from the previous test to provide the next test with a sane
environment. Make the tests do their own setup so that they
are not dependent on the success of the previous test.
The end result is shorter tests and better test isolation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow users to override the default commands provided by the
mergetools/* scriptlets.
Users occasionally run into problems where they expect to be
able to override the built-in tool names. The documentation
does not explicitly mention that built-ins cannot be overridden,
so it's easy to assume that it should work.
Lift this restriction so that built-in tools are handled the
same way as user-configured tools. Add tests to guarantee this
behavior.
A nice benefit of this change is that it protects users from
having future versions of git trump their custom configuration
with a new built-in tool.
C.f.:
http://stackoverflow.com/questions/7435002/mergetool-from-gitconfig-being-ignored
http://thread.gmane.org/gmane.comp.version-control.msysgit/13188
http://thread.gmane.org/gmane.comp.version-control.git/148267
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rolls the two-directory-diff logic from diffall script (in contrib/) into
"git difftool" framework.
By Tim Henigan
* th/difftool-diffall:
difftool: print list of valid tools with '--tool-help'
difftool: teach difftool to handle directory diffs
difftool: eliminate setup_environment function
difftool: stop appending '.exe' to git
difftool: remove explicit change of PATH
difftool: exit(0) when usage is printed
difftool: add '--no-gui' option
difftool: parse options using Getopt::Long
|
|
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18), it is possible to add a new diff tool by creating a simple
script in the '$(git --exec-path)/mergetools' directory. Updating the
difftool help text is still a manual process, and the documentation can
easily go out of sync.
This commit teaches difftool the '--tool-help' option, which:
- Reads the list of valid tools from 'mergetools/*'
- Determines which of them are actually installed
- Determines which are capable of diffing (i.e. not just a merge tool)
- Prints the resulting list for the user
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'difftool' is called to compare a range of commits that modify
more than one file, it opens a separate instance of the diff tool for
each file that changed.
The new '--dir-diff' option copies all the modified files to a temporary
location and runs a directory diff on them in a single instance of the
diff tool.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit teaches difftool to handle the '--no-gui' option. This option
negates the existing '--gui' option. The last setting given on the command
line wins.
This allows a user to configure "[alias] mdt = difftool --gui", but still
have the ability to override the setting without error:
$ git mdt --no-gui
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-difftool relies on the ability to forward unknown arguments
to the git-diff command. Add a test to ensure that this works
as advertised.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The construct "var=$(( something ..." is interpreted by some shells as
arithmetic expansion, even when it clearly is not, e.g.
var=$((foo; bar) | baz)
Avoid the issue by giving an extra SP to help the parser, i.e.
var=$( (foo; bar) | baz )
Noticed by Michael J Gruber.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is useful if you forgot to restrict the diff to the paths you want
to see, or selecting precisely the ones you want is too much typing.
[jc: with a change to return from the function upon 'n' by Charles Bailey
and a small tweak in stdin_doesnot_contain() in the test]
Signed-off-by: Sitaram Chamarty <sitaram@atc.tcs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we seem to need this variable that holds a single LF character
in many places, define it in test-lib.sh and let the test scripts
use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also remove a call to 'git config --unset difftool.prompt', since that is
already unset by restore_test_defaults.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change t/t7800-difftool.sh to to skip with the the three-arg prereq
form of test_expect_success instead of bailing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When diff.guitool is unconfigured and "--gui" is specified
git-difftool dies with the following error message:
config diff.guitool: command returned error: 1
Catch the error so that the "--gui" flag is a no-op when
diff.guitool is unconfigured.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
4cacc621 made difftool fall back to mergetool.prompt
when difftool.prompt is unconfigured. This adds a test.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is http://www.gnu.org/licenses/gpl-howto.html advises.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was not possible to pass quoted commands to '--extcmd'.
By using 'eval' we ensure that expressions with spaces and
quotes are supported.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds '-x' as a shorthand for the '--extcmd' option.
Arguments to '--extcmd' can be specified separately, which
was not originally possible.
This also fixes the brief help text so that it mentions
both '-x' and '--extcmd'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of running 'grep', 'echo', and 'wc' we simply compare
git-difftool's output against a known good value.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-difftool requires difftool.<tool>.cmd configuration even when
tools use the standard "$diffcmd $from $to" form. This teaches
git-difftool to run these tools in lieu of configuration by
allowing the command to be specified on the command line.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133377
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An undocumented mis-feature in git-difftool is that it allows you
to specify a default difftool by setting GIT_MERGE_TOOL.
This behavior was never documented and was included as an
oversight back when git-difftool was maintained outside of git.
git-mergetool never honored GIT_MERGE_TOOL so neither should
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users might prefer to have git-difftool use a different
tool when run from a Git GUI.
This teaches git-difftool to honor 'diff.guitool' when
the '--gui' option is specified. This allows users to
configure their preferred command-line diff tool in
'diff.tool' and a GUI diff tool in 'diff.guitool'.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133386
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a difftool test has an error then running the git test suite
may end up invoking a GUI diff tool. We now guard against this
by setting a difftool.bogus-tool.cmd variable.
The tests already used --tool=bogus-tool in various places so
this is simply ensuring that nothing ever falls back and
finds a real diff tool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Difftool is written in perl, so we don't build it if NO_PERL
is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
difftool now supports difftool.prompt so that users do not have to
pass --no-prompt or hit enter each time a diff tool is launched.
The --prompt flag overrides the configuration variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7800-difftool.sh tests the various command-line flags,
git-config variables, and environment settings supported by
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Kenichi Saita
John Keeping
Junio C Hamano
David Aguilar
Tim Henigan
Sitaram Chamarty
Elijah Newren
Ævar Arnfjörð Bjarmason
Markus Heidelberg
Jeff King