| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This fixes a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Next, if commit.cleanup = scissors is specified, don't produce a
scissors line in commit if one already exists in the MERGE_MSG file.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clean up the 'merge --squash c3 with c7' test by removing some
unnecessary braces and removing a pipe.
Also, generally cleanup style by unindenting a here-doc, removing stray
spaces after a redirection operator and allowing sed to open its own
input instead of redirecting input from the shell.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long time ago at fab47d05 ("merge: force edit and no-ff mode when
merging a tag object", 2011-11-07), "git merge" was made to always
create a merge commit when merging a tag, even when the side branch
being merged is a descendant of the current branch.
This default is good for merges made by upstream maintainers to
integrate work signed by downstream contributors, but will leave
pointless no-ff merges when downstream contributors pull a newer
release tag to make their long-running topic branches catch up with
the upstream. When there is no local work left on the topic, such a
merge should simply fast-forward to the commit pointed at by the
release tag.
Update the default (again) for "git merge" that merges a tag object
to (1) --no-ff (i.e. create a merge commit even when side branch
fast forwards) if the tag being merged is not at its expected place
in refs/tags/ hierarchy and (2) --ff (i.e. allow fast-forward update
when able) otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Like '--continue', the '--abort' option doesn't make any sense with
other options or arguments to 'git merge' so ensure that none are
present.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach 'git merge' the --continue option which allows 'continuing' a
merge by completing it. The traditional way of completing a merge after
resolving conflicts is to use 'git commit'. Now with commands like 'git
rebase' and 'git cherry-pick' having a '--continue' option adding such
an option to 'git merge' presents a consistent UI.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge FETCH_HEAD" dereferenced NULL pointer when merging
nothing into an unborn history (which is arguably unusual usage,
which perhaps was the reason why nobody noticed it).
* jv/merge-nothing-into-void:
merge: fix NULL pointer dereference when merging nothing into void
|
|
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
|
|
When we are on an unborn branch and merging only one foreign parent,
we allow "git merge" to fast-forward to that foreign parent commit.
This codepath incorrectly attempted to dereference the list of
parents that the merge is going to record even when the list is
empty. It must refuse to operate instead when there is no parent.
All other codepaths make sure the list is not empty before they
dereference it, and are safe.
Reported-by: Jose Ivan B. Vilarouca Filho
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When concluding a conflicted "git merge --squash", the command
failed to read SQUASH_MSG that was prepared by "git merge", and
showed only the "# Conflicts:" list of conflicted paths.
Place the contents from SQUASH_MSG at the beginning, just like we
show the commit log skeleton first when concluding a normal merge,
and then show the "# Conflicts:" list, to help the user write the
log message for the resulting commit.
Test by Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sven Strickroth <sven@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
|
|
Git-merge-file is documented to return one of three exit
codes:
- zero means the merge was successful
- a negative number means an error occurred
- a positive number indicates the number of conflicts
Unfortunately, this all gets stuffed into an 8-bit return
code. Which means that if you have 256 conflicts, this wraps
to zero, and the merge appears to succeed (and commits a
blob full of conflict-marker cruft!).
This patch clamps the return value to a maximum of 127,
which we should be able to safely represent everywhere. This
also leaves 128-255 for other values. Shells (and some parts
of git) will typically represent signal death as 128 plus
the signal number. And negative values are typically coerced
to an 8-bit unsigned value (so "return -1" ends up as 255).
Technically negative returns have the same problem (e.g.,
"-256" wraps back to 0), but this is not a problem in
practice, as the only negative value we use is "-1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git show -s is called for merge commit it prints extra newline
after any merge commit. This differs from output for commits with one
parent. Fix it by more thorough checking that diff output is disabled.
The code in question exists since commit 3969cf7db1. The additional
newline is really needed for cases when patch is requested, test
t4013-diff-various.sh contains cases which can demonstrate behavior when
the condition is restricted further.
Tests:
Added merge commit to 'set up a bit of history' case in t7007-show.sh to
cover the fix.
Existing tests are updated to demonstrate the new behaviour. Earlier,
the tests that used "git show -s --pretty=format:%s", even though
"--pretty=format:%s" calls for item separator semantics and does not ask
for the terminating newline after the last item, expected the output to
end with such a newline. They were relying on the buggy behaviour. Use
of "--format=%s", which is equivalent to "--pretty=tformat:%s" that asks
for a terminating newline after each item, is a more realistic way to
use the command.
In the test 'merge log messages' the expected data is changed, because
it was explicitly listing the extra newline. Also the msg.nologff and
msg.nolognoff expected files are replaced by one msg.nolog, because they
were diffing because of the bug, and now there should be no difference.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Spotted by Ram, confirmed by Miklos.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* vl/typofix:
random typofixes (committed missing a 't', successful missing an 's')
|
|
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume default configuration at entry,
and to reset the modified configuration variables at the end.
Test 'merge log message' was relying on the presence of option `--no-ff`
in the configuration. With the option, git show -s --pretty=format:%b HEAD
produces an empty line and without the option, it produces an empty file.
The test is modified to check with and without `--no-ff` option.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise, "git commit" wouldn't have a way to tell that we were in the
middle of merging an annotated or signed tag, not a plain commit, after
"git merge" stops to ask the user to resolve conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implemented internally instead of as "git merge --no-commit && git commit"
so that "merge --edit" is otherwise consistent (hooks, etc) with "merge".
Note: the edit message does not include the status information that one
gets with "commit --status" and it is cleaned up after editing like one
gets with "commit --cleanup=default". A later patch could add the status
information if desired.
Note: previously we were not calling stripspace() after running the
prepare-commit-msg hook. Now we are, stripping comments and
leading/trailing whitespace lines if --edit is given, otherwise only
stripping leading/trailing whitespace lines if not given --edit.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
Conflicts:
builtin/merge.c
|
|
* jn/maint-test-merge-verify-parents:
tests: teach verify_parents to check for extra parents
tests: eliminate unnecessary setup test assertions
|
|
Maybe some day in the future we will want to support a syntax
like
[merge]
ff = branch1
ff = branch2
ff = branch3
in addition to the currently permitted "true", "false", and "only"
values. So make sure we continue to treat such configurations as
though an unknown variable had been defined rather than erroring out,
until it is time to implement such a thing, so configuration files
using such a facility can be shared between present and future git.
While at it, add a few missing && and start the "combining --squash
and --no-ff" test with a known state so we can be sure it does not
succeed or fail for the wrong reason.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently verify_parents only makes sure that the earlier parents of
HEAD match the commits given, and does not care if there are more
parents. This makes it harder than one would like to check that, for
example, parent reduction works correctly when making an octopus.
Fix it by checking that HEAD^(n+1) is not a valid commit name.
Noticed while working on a new test that was supposed to create a
fast-forward one commit ahead but actually created a merge.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
|
|
The parsing of the additional command line parameters supplied to
the branch.<name>.mergeoptions configuration variable was implemented
at the wrong stage. If any merge-related variable came after we read
branch.<name>.mergeoptions, the earlier value was overwritten.
We should first read all the merge.* configuration, override them by
reading from branch.<name>.mergeoptions and then finally read from
the command line.
This patch should fix it, even though I now strongly suspect that
branch.<name>.mergeoptions that gives a single command line that
needs to be parsed was likely to be an ill-conceived idea to begin
with. Sigh...
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of git's tests write files and define shell functions and
variables that will last throughout a test script at the top of
the script, before all test assertions:
. ./test-lib.sh
VAR='some value'
export VAR
>empty
fn () {
do something
}
test_expect_success 'setup' '
... nontrivial commands go here ...
'
Two scripts use a different style with this kind of trivial code
enclosed by a test assertion; fix them. The usual style is easier to
read since there is less indentation to keep track of and no need to
worry about nested quotes; and on the other hand, because the commands
in question are trivial, it should not make the test suite any worse
at catching future bugs in git.
While at it, make some other small tweaks:
- spell function definitions with a space before () for consistency
with other scripts;
- use the self-contained command "git mktree </dev/null" in
preference to "git write-tree" which looks at the index when
writing an empty tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Part of a campaign to make sure "git <command> -h" works correctly
when run from distractingly bad repositories.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people like to "git fetch origin && merge origin/master" from
the unborn branch provided when first initializing a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The details of the reflog message are not important, but
including something sane in the reflog is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Probably as a development aid, this test script runs gitk --all
to allow the driver to inspect history between tests when run
with --debug. As a result, running all tests with --debug
requires closing a long series of gitk displays, one at a time.
Use git log --graph --oneline instead. This way, the history is
available for viewing with "git show" but the test script finishes
without interaction.
Longer term, it would be nice to have an option to run a
user-specified command between tests. This patch does not do
that.
Cc: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Guard setup commands with test_expect_success, so they are easier
to visually skip over and get to the good part. While at it:
- use "printf '%s\n' a b ..." instead of "cat <<EOF" for test
vectors with short lines;
- use test_cmp instead of test foo = bar where possible, for
better output with -v on failure;
- do not go to extraordinary lengths to print a relevant message
when test commands fail. There is a patch in flight that could be
used to restore the nice error messages in a cleaner way.
Cc: Lars Hjemli <hjemli@gmail.com>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If no branch 'foo' exists but a tag 'foo' does, then
git merge foo^ results in
Merge branch 'foo' (early part)
as a commit message, because the relevant code path checks that
refs/heads/foo is a valid refname for writing rather than for
reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many places in test suite we have "sleep"s that do not have to be
there.
- I do not simply see the point of the one in t3500. It may be making
sure that the timestamp order of commits generated during the test is
stable, in which case test_tick is the right ingredient to use without
wasting tester's time.
- The one in t4011 is to make sure that the plumbing diff-index notices
the stat-dirtyness of a removed then identically recreated symlink.
Keeping the old symlink around to make sure that a newly created
symlink gets different ino would be sufficient for that purpose.
- The one in t7600 is to make sure that "git merge" does not get confused
by stat-dirty "file" in the working tree. Again, keeping the old file
around and creating an identical copy to ensure a different ino would
be sufficient for that purpose.
The "racy git" tests in t0010 are inherently about mtime between the index
itself and index entries. The "sleep" in that test must stay as they are.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For convenience in scripts and aliases, add the option
--ff-only to only allow fast-forwards (and up-to-date,
despite the name).
Disallow combining --ff-only and --no-ff, since they
flatly contradict each other.
Allow all other options to be combined with --ff-only
(i.e. do not add any code to handle them specially),
including the following options:
* --strategy (one or more): As long as the chosen merge
strategy results in up-to-date or fast-forward, the
command will succeed.
* --squash: I cannot imagine why anyone would want to
squash commits only if fast-forward is possible, but I
also see no reason why it should not be allowed.
* --message: The message will always be ignored, but I see
no need to explicitly disallow providing a redundant message.
Acknowledgements: I did look at Yuval Kogman's earlier
patch (107768 in gmane), mainly as shortcut to find my
way in the code, but I did not copy anything directly.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/merge-noff:
builtin-commit: use reduce_heads() only when appropriate
Conflicts:
builtin-commit.c
t/t7600-merge.sh
|
|
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit 6bb6b034 (builtin-commit: use commit_tree(), 2008-09-10),
builtin-commit performs a reduce_heads() unconditionally. However,
it's not always needed, and in some cases even harmful.
reduce_heads() is not needed for the initial commit or for an
"ordinary" commit, because they don't have any or have only one
parent, respectively.
reduce_heads() must be avoided when 'git commit' is run after a 'git
merge --no-ff --no-commit', otherwise it will turn the
non-fast-forward merge into fast-forward. For the same reason,
reduce_heads() must be avoided when amending such a merge commit.
To resolve this issue, 'git merge' will write info about whether
fast-forward is allowed or not to $GIT_DIR/MERGE_MODE. Based on this
info, 'git commit' will only perform reduce_heads() when it's
committing a merge and fast-forward is enabled.
Also add test cases to ensure that non-fast-forward merges are
committed and amended properly.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Denton Liu
SZEDER Gábor
Junio C Hamano
Stefan Beller
Michael J Gruber
Chris Packham
Sven Strickroth
Jeff King
Max Kirillov
Miklos Vajna
Veres Lajos
Yann Droneaud
Jiang Xin
Jay Soffian
Jonathan Nieder
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Björn Gustavsson
Miklos Vajna