| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Stop moving the .git/hooks directory out of the way, or creating it
during test setup. Instead assume that it will contain
harmless *.sample files.
That we can assume that is discussed in point #4 of
f0d4d398e28 (test-lib: split up and deprecate test_create_repo(),
2021-05-10), those parts of this could and should have been done in
that change.
Removing the "mkdir -p" here will then validate that our templates are
being used, since we'd subsequently fail to create a hook in that
directory if it didn't exist. Subsequent commits will have those hooks
created by a "test_hook" wrapper, which will then being doing that
same validation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a881 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In its current state, the t7519 test dealing with untracked cache
assumes that "git update-index --untracked-cache" will *populate* the
untracked cache. This is not correct - it will only add an empty
untracked cache structure to the index.
If we're going to compare two git status runs with something
interesting happening in-between, we need to ensure that the index is
in a stable/steady state *before* that first run.
Achieve this by adding another prior "git status" run.
At this stage this change does nothing, because there is a bug,
addressed in the next patch, whereby once the empty untracked cache
structure is added by the update-index invocation, the untracked cache
gets updated in every subsequent "git status" call, but the index with
these updates does not get written down.
That bug actually invalidates this entire test case - but we're fixing
that next.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t7519 there is a test that writes files to disk, and immediately
writes the index with the untracked cache. Because of
mtime-comparison logic that uses a 1-second resolution, this means
the cached entries are not trusted/used under some circumstances
(see read-cache.c#is_racy_stat()).
Untracked cache tests in t7063 use a 1-second delay to avoid this
issue, but we don't want to introduce arbitrary slowdowns, so instead
use test-tool chmtime to backdate the files slightly. The t7063
delays are a #leftoverbit, to be worked on in a separate series.
This change doesn't actually affect the outcome of the test, but does
enhance its validity, and becomes relevant after later changes.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in compound statements in order to reduce the
number of possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change modified GIT_TRACE2_EVENT_NESTING by default within
test-lib.sh. These custom assignments throughout the test suite are no
longer necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse index and split index features are said to be currently
incompatible [1], and consequently GIT_TEST_SPLIT_INDEX=1 might
interfere with the test cases exercising the sparse index feature.
Therefore GIT_TEST_SPLIT_INDEX is already explicitly disabled for the
whole of 't1092-sparse-checkout-compatibility.sh'. There are,
however, two other test cases exercising sparse index, namely
'sparse-index enabled and disabled' in
't1091-sparse-checkout-builtin.sh' and 'status succeeds with sparse
index' in 't7519-status-fsmonitor.sh', and these two could fail with
GIT_TEST_SPLIT_INDEX=1 as well [2].
Unset GIT_TEST_SPLIT_INDEX and disable the split index in these two
test cases to avoid such interference.
Note that this is the minimal change to merely avoid failures when
these test cases are run with GIT_TEST_SPLIT_INDEX=1. Interestingly,
though, without these changes the 'git sparse-checkout init --cone
--sparse-index' commands still succeed even with split index, and set
all the necessary configuration variables and create the initial
'$GIT_DIR/info/sparse-checkout' file, but the test failures are caused
by later sanity checks finding that the index is not in fact a sparse
index. This indicates that 'git sparse-checkout init --sparse-index'
lacks some error checking and its tests lack coverage related to split
index, but fixing those issues is beyond the scope of this patch
series.
[1] https://public-inbox.org/git/48e9c3d6-407a-1843-2d91-22112410e3f8@gmail.com/
[2] Neither of these test cases fail at the moment, because
GIT_TEST_SPLIT_INDEX=1 is broken and never splits the index, and
it broke long before the sparse index feature was added.
This patch series is about to fix GIT_TEST_SPLIT_INDEX, and then
both test cases mentioned above would fail.
(The diff is best viewed with '--ignore-all-space')
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse index is tested with the FS Monitor hook and extension since
f8fe49e (fsmonitor: integrate with sparse index, 2021-07-14). This test
was very fragile because it shared an index across sparse and non-sparse
behavior. Since that expansion and contraction could cause the index to
lose its FS Monitor bitmap and token, behavior is fragile to changes in
'git sparse-checkout set'.
Rewrite the test to use two clones of the original repo: full and
sparse. This allows us to also keep the test files (actual, expect,
trace2.txt) out of the repos we are testing with 'git status'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we need to expand a sparse-index into a full one, then the FS Monitor
bitmap is going to be incorrect. Ensure that we start fresh at such an
event.
While this is currently a performance drawback, the eventual hope of the
sparse-index feature is that these expansions will be rare and hence we
will be able to keep the FS Monitor data accurate across multiple Git
commands.
These tests are added to demonstrate that the behavior is the same
across a full index and a sparse index, but also that file modifications
to a tracked directory outside of the sparse cone will trigger
ensure_full_index().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some file monitors like watchman will use something other than a timestamp
to keep better track of what changes happen in between calls to query
the fsmonitor. The clockid in watchman is a string. Now that the index
is storing an opaque token for the last update the code needs to be
updated to pass that opaque token to a verion 2 of the fsmonitor hook.
Because there are repos that already have version 1 of the hook and we
want them to continue to work when git is updated, we need to handle
both version 1 and version 2 of the hook. In order to do that a
config value is being added core.fsmonitorHookVersion to force what
version of the hook should be used. When this is not set it will default
to -1 and then the code will attempt to call version 2 of the hook first.
If that fails it will fallback to trying version 1.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users of oneway_merge() (like "reset --hard") learned to take
advantage of fsmonitor to avoid unnecessary lstat(2) calls.
* us/unpack-trees-fsmonitor:
unpack-trees: skip stat on fsmonitor-valid files
|
|
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
|
|
The index might be aware that a file hasn't modified via fsmonitor, but
unpack-trees did not pay attention to it and checked via ie_match_stat
which can be inefficient on certain filesystems. This significantly slows
down commands that run oneway_merge, like checkout and reset --hard.
This patch makes oneway_merge check whether a file is considered
unchanged through fsmonitor and skips ie_match_stat on it. unpack-trees
also now correctly copies over fsmonitor validity state from the source
index. Finally, for correctness, we force a refresh of fsmonitor state in
tweak_fsmonitor.
After this change, commands like stash (that use reset --hard
internally) go from 8s or more to ~2s on a 250k file repository on a
mac.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Utsav Shah <utsav@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comments for the staging/unstaging test did not accurately
describe the scenario being tested. It is not essential that
the test files being staged/unstaged appear at the end of the
index. All that is required is that the test files are not
flagged with CE_FSMONITOR_VALID and have a position in the
index greater than the number of entries in the index after
unstaging.
The comment for this test has been updated to be more
accurate with respect to the scenario that's being tested.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While doing some testing with fsmonitor enabled I found
that git commands would segfault after staging and
unstaging an untracked file. Looking at the crash it
appeared that fsmonitor_ewah_callback was attempting to
adjust bits beyond the bounds of the index cache.
Digging into how this could happen it became clear that
the fsmonitor extension must have been written with
more bits than there were entries in the index. The
root cause ended up being that fill_fsmonitor_bitmap was
populating fsmonitor_dirty with bits for all entries in
the index, even those that had been marked for removal.
To solve this problem fill_fsmonitor_bitmap has been
updated to skip entries with the the CE_REMOVE flag set.
With this change the bits written for the fsmonitor
extension will be consistent with the index entries
written by do_write_index. Additionally, BUG checks
have been added to detect if the number of bits in
fsmonitor_dirty should ever exceed the number of
entries in the index again.
Another option that was considered was moving the call
to fill_fsmonitor_bitmap closer to where the index is
written (and where the fsmonitor extension itself is
written). However, that did not work as the
fsmonitor_dirty bitmap must be filled before the index
is split during writing.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, the `index_state` struct becomes the new home for the
flag that says whether the fsmonitor hook has been run, i.e. it is now
per-index.
It also gets re-set when the index is discarded, fixing the bug
demonstrated by the "test_expect_failure" test added in the preceding
commit. In that case fsmonitor-enabled Git would miss updates under
certain circumstances, see that preceding commit for details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This one is tricky.
When `core.fsmonitor` is set, a `refresh_index()` will not perform a
full scan of files that might be modified, but will query the fsmonitor
and refresh only the ones that have been actually touched.
Due to implementation details, the fsmonitor is queried in
`refresh_cache_ent()`, but of course it only has to be queried once, so
we set a flag when we did that. But when the index was discarded, we did
not re-set that flag.
So far, this is only covered by our test suite when running with
GIT_TEST_FSMONITOR=$PWD/t7519/fsmonitor-all, and only due to the way the
built-in stash interacts with the recursive merge machinery.
Let's introduce a straight-forward regression test for this.
We simply extend the "read & discard index" loop in `test-tool
read-cache` to optionally refresh the index, report on a given file's
status, and then modify that file. Due to the bug described above, only
the first refresh will actually query the fsmonitor; subsequent loop
iterations will not.
This problem was reported by Ævar Arnfjörð Bjarmason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
|
|
Rename GIT_FORCE_PRELOAD_TEST to GIT_TEST_PRELOAD_INDEX for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ba1b9cac ("fsmonitor: delay updating state until after split index
is merged", 2017-10-27) resolved the problem of the fsmonitor data
being applied to the non-base index when reading; however, a similar
problem exists when writing the index. Specifically, writing of the
fsmonitor extension happens only after the work to split the index
has been applied -- as such, the information in the index is only
for the non-"base" index, and thus the extension information
contains only partial data.
When saving, compute the ewah bitmap before the index is split, and
store it in the fsmonitor_dirty field, mirroring the behavior that
occurred during reading. fsmonitor_dirty is kept from being leaked by
being freed when the extension data is written -- which always happens
precisely once, no matter the split index configuration.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test the ability to add/remove the fsmonitor index extension via
update-index.
Test that dirty files returned from the integration script are properly
represented in the index extension and verify that ls-files correctly
reports their state.
Test that ensure status results are correct when using the new fsmonitor
extension. Test untracked, modified, and new files by ensuring the
results are identical to when not using the extension.
Test that if the fsmonitor extension doesn't tell git about a change, it
doesn't discover it on its own. This ensures git is honoring the
extension and that we get the performance benefits desired.
Three test integration scripts are provided:
fsmonitor-all - marks all files as dirty
fsmonitor-none - marks no files as dirty
fsmonitor-watchman - integrates with Watchman with debug logging
To run tests in the test suite while utilizing fsmonitor:
First copy t/t7519/fsmonitor-all to a location in your path and then set
GIT_FORCE_PRELOAD_TEST=true and GIT_FSMONITOR_TEST=fsmonitor-all and run
your tests.
Note: currently when using the test script fsmonitor-watchman on
Windows, many tests fail due to a reported but not yet fixed bug in
Watchman where it holds on to handles for directories and files which
prevents the test directory from being cleaned up properly.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Tao Klerks
Junio C Hamano
Eric Sunshine
Derrick Stolee
SZEDER Gábor
Elijah Newren
Kevin Willford
Utsav Shah
William Baker
Johannes Schindelin
Ben Peart
Nguyễn Thái Ngọc Duy
Alex Vandiver