| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When reverting or cherry-picking, one of the options we can pass the
sequencer is `--skip`. However, unlike rebasing, `--skip` is not
mentioned as a possible option in the status message. Mention it so that
users are more aware of their options.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extra blank lines in "git status" output have been reduced.
* jl/status-reduce-vertical-blank:
status: remove the empty line after hints
|
|
The code to read state files used by the sequencer machinery for
"git status" has been made more robust against a corrupt or stale
state files.
* pw/status-with-corrupt-sequencer-state:
status: do not report errors in sequencer/todo
sequencer: factor out todo command name parsing
sequencer: always allow tab after command name
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
commit 4a72486de9 ("fix cherry-pick/revert status after commit",
2019-04-16) used parse_insn_line() to parse the first line of the todo
list to check if it was a pick or revert. However if the todo list is
left over from an old cherry-pick or revert and references a commit that
no longer exists then parse_insn_line() prints an error message which is
confusing for users [1]. Instead parse just the command name so that the
user is alerted to the presence of stale sequencer state by status
reporting that a cherry-pick or revert is in progress.
Note that we should not be leaving stale sequencer state lying around
(or at least not as often) after commit b07d9bfd17 ("commit/reset: try
to clean up sequencer state", 2019-04-16). However the user may still
have stale state that predates that commit.
Also avoid printing an error message if for some reason the user has a
file called `sequencer` in $GIT_DIR.
[1] https://public-inbox.org/git/3bc58c33-4268-4e7c-bf1a-fe349b3cb037@www.fastmail.com/
Reported-by: Espen Antonsen <espen@inspired.no>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before this patch, there is inconsistency between the status
messages with hints and the ones without hints: there is an
empty line between the title and the file list if hints are
presented, but there isn't one if there are no hints.
This patch remove the inconsistency by removing the empty
lines even if hints are presented.
Signed-off-by: John Lin <johnlinp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already suggest 'git rebase --abort' during a conflicted rebase.
Similarly, suggest 'git merge --abort' during conflict resolution on
'git merge'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expand test coverage with one or more than two commands done
and with zero, one or more than two commands remaining.
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git status gives more information during rebase -i, about the list of
command that are done during the rebase. It displays the two last
commands executed and the two next lines to be executed. It also gives
hints to find the whole files in .git directory.
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we show unmerged paths, we had an artificial 20 columns floor
for the width of labels (e.g. "both deleted:") shown next to the
pathnames. Depending on the locale, this may result in a label that
is too wide when all the label strings are way shorter than 20
columns, or no-op when a label string is longer than 20 columns.
Just drop the artificial floor. The screen real estate is better
utilized this way when all the strings are shorter.
Adjust the tests to this change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Especially helpful when cherry-picking multiple commits.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
When a test forgets to include && after each command, it is possible
for an early command to succeed but the test to fail, which can hide
bugs.
Checked using the following patch to the test harness:
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -425,7 +425,17 @@ test_eval_ () {
eval </dev/null >&3 2>&4 "$*"
}
+check_command_chaining_ () {
+ eval >&3 2>&4 "(exit 189) && $*"
+ eval_chain_ret=$?
+ if test "$eval_chain_ret" != 189
+ then
+ error 'bug in test script: missing "&&" in test commands'
+ fi
+}
+
test_run_ () {
+ check_command_chaining_ "$1"
test_cleanup=:
expecting_failure=$2
setup_malloc_check
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The previous commit set status.displayCommentPrefix file-wide in
t7060-wtstatus.sh, t7508-status.sh and t/t7512-status-help.sh to make the
patch small. However, now that status.displayCommentPrefix is not the
default, it is better to disable it in tests so that the most common
situation is also the most tested.
While we're there, move the "cat > expect << EOF" blocks inside the
tests.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
|
|
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-pick is in progress, 'git status' gives the advice to
run "git commit" to finish the cherry-pick.
However, this won't continue the sequencer, when picking a range of
commits.
Advise users to run "git cherry-pick --continue/--abort"; they work
when picking a single commit as well.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b397ea4 (status: show more info than "currently not on any branch",
2013-03-13) attempted to make the output of 'git status' richer in
the case of a detached HEAD. Before this patch, with a detached
HEAD, we saw:
$ git status
# Not currently on any branch.
But after the patch, we see:
$ git checkout v1.8.2
$ git status
# HEAD detached at v1.8.2.
It works by digging the reflog for the most recent message of the
form "checkout: moving from xxxx to yyyy". It then asserts that
HEAD and "yyyy" are the same, and displays this message. When they
aren't equal, it displays:
$ git status
# HEAD detached from fe11db.
so that the user can see where the HEAD was first detached.
In case of a rebase [-i] operation in progress, this message depends
on the implementation of rebase writing "checkout: " messages to the
reflog, but that is an implementation detail of "rebase". To remove
this dependency so that rebase can be updated to write better reflog
messages, replace this "HEAD detached from" message with:
# rebase in progress; onto $ONTO
Changes to the commit object name in the expected output for some of
the tests shows that what the test expected "status" to show during
"rebase -i" was not consistent with the output during a vanilla
"rebase", which showed on top of what commit the series is being
replayed. Now we consistently expect something meaningful to the
end user.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b397ea4863a1 (status: show more info than "currently not on any
branch", 2013-03-13) wanted to make sure that after a checkout to
detach HEAD, the user can see where the HEAD was originally detached
from. The last test added by that commit to t7512 shows one
example, immediately after HEAD is detached. Enhance that test to
show "detached HEAD from" form that should be shown when the user
further resetted to another commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the logical equivalent for "git status" of 3ee4452 (bash: teach
__git_ps1 about REVERT_HEAD).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a bit more information to "git status" during a rebase/bisect
session.
* nd/branch-show-rebase-bisect-state:
status, branch: fix the misleading "bisecting" message
branch: show more information when HEAD is detached
status: show more info than "currently not on any branch"
wt-status: move wt_status_get_state() out to wt_status_print()
wt-status: split wt_status_state parsing function out
wt-status: move strbuf into read_and_strip_branch()
|
|
The current message is "bisecting %s" (or "bisecting branch %s").
"%s" is the current branch when we started bisecting. Clarify that to
avoid confusion with good and bad refs passed to "bisect" command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
|
|
When a remote ref or a tag is checked out, HEAD is automatically
detached. There is no user-friendly way to find out what ref is
checked out in this case. This patch digs in reflog for this
information and shows "HEAD detached from origin/master" or "HEAD
detached at v1.8.0" instead of "currently not on any branch".
When it cannot figure out the original ref, it shows an abbreviated
SHA-1. "Currently not on any branch" would never display (unless
reflog is pruned to near empty that the last checkout entry is lost).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Advice" is a mass noun, not a count noun; it's not ordinarily
pluralized.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The typical use-case is starting a rebase, do something else, come
back the day after, run "git status" or make a new commit and wonder
what in the world's going on. Which branch is being rebased is
probably the most useful tidbit to help, but the target may help
too.
Ideally, I would have loved to see "rebasing master on
origin/master", but the target ref name is not stored during rebase,
so this patch writes "rebasing master on a78c8c98b" as a
half-measure to remind future users of that potential improvement.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new informative help messages at the output of 'git status' when
the user is splitting a commit. The code figures this state by
comparing the contents of the following files in the .git/ directory:
- HEAD
- ORIG_HEAD
- rebase-merge/amend
- rebase-merge/orig-head
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The display of the advice '(use git add/rm [...])' (when there are
unmerged files) after running 'git status' is now depending of the
mark, whether it's 'both deleted', 'deleted by us/them' or others. For
instance, when there is just one file that's marked as 'both deleted',
'git status' shows '(use git rm [...])' and if there are two files,
one as 'both deleted' and the other as 'added by them', the advice is
'(use git add/rm [...])'.
The previous tests in t7512-status-help.sh are updated.
Test about the case of only 'both deleted' is added in
t7060-wtstatus.sh
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following tests include several cases in which the user needs to
run 'git status' to know his current situation, whether there're
conflicts or he's in rebase/bisect/am/cherry-pick progress.
One of the test is about the set of the advice.statushints config key
to 'false' in .git/config.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Denton Liu
Junio C Hamano
Phillip Wood
John Lin
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Matthieu Moy
Guillaume Pagès
Ralf Thielow
Jonathan Nieder
Kevin Bracey
Ramkumar Ramachandra
Greg Price
Lucien Kong