| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
|
|
Workarounds for certain build of GPG that triggered false breakage
in a test.
* mg/verify-commit:
t7510: do not fail when gpg warns about insecure memory
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on how gpg was built, it may issue the following
message to stderr when run:
Warning: using insecure memory!
When the test is collecting gpg output it is therefore not
enough to just match on a "gpg: " prefix it must also match
on a "Warning: " prefix wherever it needs to match lines
that have been produced by gpg.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add 'verify-commit' to be used in a way similar to 'verify-tag' is
used. Further work on verifying the mergetags might be needed.
* mg/verify-commit:
t7510: test verify-commit
t7510: exit for loop with test result
verify-commit: scriptable commit signature verification
gpg-interface: provide access to the payload
gpg-interface: provide clear helper for struct signature_check
|
|
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This mixes the "git verify-commit" tests in with the "git show
--show-signature" tests, to keep the tests more readable.
The tests already mix in the "call show" tests with the "verify" tests.
So in case of a test beakage, a '-v' run would be needed to reveal the
exact point of breakage anyway.
Additionally, test the actual output of "git verify-commit" and "git
show --show-signature" and compare to "git cat-file".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7510 uses for loops in a subshell, which need to make sure that the test
returns with the appropriate error code from within the loop.
Restructure the loops as the usual && chains with a single point of
"exit 1" at the end of the loop to make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user asks for --format=%G with nothing else, we
correctly realize that "%G" is not a valid placeholder (it
should be "%G?", "%GK", etc). But we still tell the
strbuf_expand code that we consumed 2 characters, causing it
to jump over the trailing NUL and output garbage.
This also fixes the case where "%GX" would be consumed (and
produce no output). In other cases, we pass unrecognized
placeholders through to the final string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not check these along with the other pretty-format
placeholders in t6006, because we need signed commits to
make them interesting. t7510 has such commits, and can
easily exercise them in addition to the regular
--show-signature code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We tested both good and bad signatures, but not ones made
correctly but with a key for which we have no trust.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check multiple commits in a loop. Because we want to
break out of the loop if any single iteration fails, we use
a subshell/exit like:
(
for i in $stuff
do
do-something $i || exit 1
done
)
However, we are inconsistent in our loop body. Some commands
get their own "|| exit 1", and others try to chain to the
next command with "&&", like:
X &&
Y || exit 1
Z || exit 1
This is a little hard to read and follow, because X and Y
are treated differently for no good reason. But much worse,
the second loop follows a similar pattern and gets it wrong.
"Y" is expected to fail, so we use "&& exit 1", giving us:
X &&
Y && exit 1
Z || exit 1
That gets the test for X wrong (we do not exit unless both X
fails and Y unexpectedly succeeds, but we would want to exit
if _either_ is wrong). We can write this clearly and
correctly by consistently using "&&", followed by a single
"|| exit 1", and negating Y with "!" (as we would in a
normal &&-chain). Like:
X &&
! Y &&
Z || exit 1
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our setup creates a sequence of commits, each with its own
tag. However, we sometimes refer to "seventh-signed" as
"master". This works, since it is at the tip of the created
branch, but is brittle if new tests need to add more
commits. Let's use its tag name to be unambiguous.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests are checking that :
- when commit.gpgsign is true, "git commit" creates signed commits
- when commit.gpgsign is false, "git commit" creates unsigned commits
- when commit.gpgsign is true, "git commit --no-gpg-sign" creates
unsigned commits
- when commit.gpgsign is true, "git rebase -f" creates signed commits
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Kyle J. McKay
Michael J Gruber
Nicolas Vigier