summaryrefslogtreecommitdiff
path: root/t/t7508-status.sh
AgeCommit message (Collapse)AuthorFilesLines
2011-06-06Merge branch 'bc/maint-status-z-to-use-porcelain'Libravatar Junio C Hamano1-0/+7
* bc/maint-status-z-to-use-porcelain: builtin/commit.c: set status_format _after_ option parsing t7508: demonstrate status's failure to use --porcelain format with -z Conflicts: builtin/commit.c
2011-05-29builtin/commit.c: set status_format _after_ option parsingLibravatar Brandon Casey1-1/+1
'git status' should use --porcelain output format when -z is given. It was not doing so since the _effect_ of using -z, namely that null_termination would be set, was being checked _before_ option parsing was performed. So, move the check so that it is performed after option parsing. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-29t7508: demonstrate status's failure to use --porcelain format with -zLibravatar Brandon Casey1-0/+7
When 'git status' is supplied the -z switch, and no output format has been selected, it is supposed to use the --porcelain format. This does not happen. Instead, the standard long format is used. Add a test to demonstrate this failure. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-14i18n: use test_i18n{grep,cmp} in t7508Libravatar Junio C Hamano1-120/+102
Two tests looked for "[Uu]sage" in the output, but we cannot expect the l10n to use that phrase. Mark them with test_i18ngrep so that in later versions we can test truly localized versions with the same tests, not just GETTEXT_POISON that happens to keep the original string in the output. Merge a few tests that were artificially split into "do" and "test output under C_LOCALE_OUTPUT" in the original i18n patches back. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status basic messagesLibravatar Ævar Arnfjörð Bjarmason1-50/+65
Gettextize the most common git-status messages. Many tests checked for these explicitly. Change them to skip under GETTEXT_POISON=YesPlease. Some of the tests in t7508-status.sh needed to be split up when I added C_LOCALE_OUTPUT to them, since parts of them affected later tests (some of which aren't being skipped) indirectly. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'aa/status-hilite-branch'Libravatar Junio C Hamano1-2/+3
* aa/status-hilite-branch: default color.status.branch to "same as header" status: show branchname with a configurable color
2010-12-12Merge branch 'jn/git-cmd-h-bypass-setup'Libravatar Junio C Hamano1-0/+24
* jn/git-cmd-h-bypass-setup: update-index -h: show usage even with corrupt index merge -h: show usage even with corrupt index ls-files -h: show usage even with corrupt index gc -h: show usage even with broken configuration commit/status -h: show usage even with broken configuration checkout-index -h: show usage even in an invalid repository branch -h: show usage even in an invalid repository Conflicts: builtin/merge.c
2010-11-29status: show branchname with a configurable colorLibravatar Aleksi Aalto1-2/+3
You can tell "git status" to paint the name of the current branch in its output (the line that says "On branch ...") by setting the configuration variable color.status.branch; it is by default turned off. Signed-off-by: Aleksi Aalto <aga@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Better "Changed but not updated" message in git-statusLibravatar Matthieu Moy1-17/+17
Older Gits talked about "updating" a file to add its content to the index, but this terminology is confusing for new users. "to stage" is far more intuitive and already used in e.g. the "git stage" command name. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-22commit/status -h: show usage even with broken configurationLibravatar Nguyễn Thái Ngọc Duy1-0/+24
"git status" and "git commit" read .git/config and .gitmodules before parsing options, but there is no reason to access a repository at all when the caller just wanted to know what arguments are accepted. [jn: rewrote the log message and added test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-06t3404 & t7508: cd inside subshell instead of aroundLibravatar Jens Lehmann1-1/+1
Fixed all places where it was a straightforward change from cd'ing into a directory and back via "cd .." to a cd inside a subshell. Found these places with "git grep -w "cd \.\.". Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-04Merge branch 'ab/test-2'Libravatar Junio C Hamano1-1/+1
* ab/test-2: (51 commits) tests: factor HOME=$(pwd) in test-lib.sh test-lib: use subshell instead of cd $new && .. && cd $old tests: simplify "missing PREREQ" message t/t0000-basic.sh: Run the passing TODO test inside its own test-lib test-lib: Allow overriding of TEST_DIRECTORY test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../ test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../ test: Introduce $GIT_BUILD_DIR cvs tests: do not touch test CVS repositories shipped with source t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite t/t7105-reset-patch.sh: Add a PERL prerequisite t/t9001-send-email.sh: convert setup code to tests t/t9001-send-email.sh: change from skip_all=* to prereq skip t/t9001-send-email.sh: Remove needless PROG=* assignment t/t9600-cvsimport.sh: change from skip_all=* to prereq skip lib-patch-mode tests: change from skip_all=* to prereq skip t/t3701-add-interactive.sh: change from skip_all=* to prereq skip tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh t/Makefile: Create test-results dir for smoke target ... Conflicts: t/t6035-merge-dir-to-symlink.sh
2010-08-18tests: A SANITY test prereq for testing if we're rootLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Some tests depend on not being able to write to files after chmod -w. This doesn't work when running the tests as root. Change test-lib.sh to test if this works, and if so it sets a new SANITY test prerequisite. The tests that use this previously failed when run under root. There was already a test for this in t3600-rm.sh, added by Junio C Hamano in 2283645 in 2006. That check now uses the new SANITY prerequisite. Some of this was resurrected from the "Tests in Cygwin" thread in May 2009: http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385 Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09Add tests for the diff.ignoreSubmodules config optionLibravatar Jens Lehmann1-2/+10
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09Submodules: Use "ignore" settings from .gitmodules too for diff and statusLibravatar Jens Lehmann1-8/+83
The .gitmodules file is parsed for "submodule.<name>.ignore" entries before looking for them in .git/config. Thus settings found in .git/config will override those from .gitmodules, thereby allowing the local developer to ignore settings given by the remote side while also letting upstream set defaults for those users who don't have special needs. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09Submodules: Add the new "ignore" config option for diff and statusLibravatar Jens Lehmann1-4/+96
The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-30Merge branch 'jl/status-ignore-submodules'Libravatar Junio C Hamano1-0/+127
* jl/status-ignore-submodules: Add the option "--ignore-submodules" to "git status" git submodule: ignore dirty submodules for summary and status Conflicts: builtin/commit.c t/t7508-status.sh wt-status.c wt-status.h
2010-06-25Add the option "--ignore-submodules" to "git status"Libravatar Jens Lehmann1-0/+127
In some use cases it is not desirable that "git status" considers submodules that only contain untracked content as dirty. This may happen e.g. when the submodule is not under the developers control and not all build generated files have been added to .gitignore by the upstream developers. Using the "untracked" parameter for the "--ignore-submodules" option disables checking for untracked content and lets git diff report them as changed only when they have new commits or modified content. Sometimes it is not wanted to have submodules show up as changed when they just contain changes to their work tree (this was the behavior before 1.7.0). An example for that are scripts which just want to check for submodule commits while ignoring any changes to the work tree. Also users having large submodules known not to change might want to use this option, as the - sometimes substantial - time it takes to scan the submodule work tree(s) is saved when using the "dirty" parameter. And if you want to ignore any changes to submodules, you can now do that by using this option without parameters or with "all" (when the config option status.submodulesummary is set, using "all" will also suppress the output of the submodule summary). A new function handle_ignore_submodules_arg() is introduced to parse this option new to "git status" in a single location, as "git diff" already knew it. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-03Documentation+t5708: document and test status -s -bLibravatar Michael J Gruber1-1/+46
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-21Merge branch 'mg/advice-statushints'Libravatar Junio C Hamano1-0/+45
* mg/advice-statushints: wt-status: take advice.statusHints seriously t7508: test advice.statusHints Conflicts: wt-status.c
2010-05-06wt-status: take advice.statusHints seriouslyLibravatar Michael J Gruber1-1/+1
Currently, status gives a lot of hints even when advice.statusHints is false. Change this so that all hints depend on the config variable. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-06t7508: test advice.statusHintsLibravatar Michael J Gruber1-0/+45
edf563f (status: make "how to stage" messages optional, 2009-09-09) introduced advice.statusHints without tests. Add a few tests to describe and test the status quo. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-03t7508: add a test for "git status" in a read-only repositoryLibravatar Markus Heidelberg1-0/+15
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-02git status: refresh the index if possibleLibravatar Markus Heidelberg1-1/+1
This was already the case before commit 9e4b7ab6 (git status: not "commit --dry-run" anymore, 2009-08-15) with the difference that it died at failure. It got lost during the new implementation of "git status", which was meant to only change behaviour when invoked with arguments. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-02t7508: add test for "git status" refreshing the indexLibravatar Markus Heidelberg1-0/+10
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-17git status: Show uncommitted submodule changes too when enabledLibravatar Jens Lehmann1-2/+2
When the configuration variable status.submodulesummary is not 0 or false, "git status" shows the submodule summary of the staged submodule commits. But it did not show the summary of those commits not yet staged in the supermodule, making it hard to see what will not be committed. The output of "submodule summary --for-status" has been changed from "# Modified submodules:" to "# Submodule changes to be committed:" for the already staged changes. "# Submodules changed but not updated:" has been added for changes that will not be committed. This is much clearer and consistent with the output for regular files. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-08t7508-status: test all modes with colorLibravatar Michael J Gruber1-28/+138
Move a useful script function to decode colored output to text form from t4034 and use it in this test as well. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-08t7508-status: status --porcelain ignores relative paths settingLibravatar Michael J Gruber1-0/+18
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-27t7508-status.sh: Add tests for status -sLibravatar Michael J Gruber1-0/+166
The new short status has been completely untested so far. Introduce tests by duplicating all tests which are present for the long format. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-22git status: not "commit --dry-run" anymoreLibravatar Junio C Hamano1-5/+7
This removes tentative "git stat" and make it take over "git status". There are some tests that expect "git status" to exit with non-zero status when there is something staged. Some tests expect "git status path..." to show the status for a partial commit. For these, replace "git status" with "git commit --dry-run". For the ones that do not attempt a dry-run of a partial commit that check the output from the command, check the output from "git status" as well, as they should be identical. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-14test-suite: Make test script numbers uniqueLibravatar Johannes Sixt1-0/+400
In order to selectively skip tests, the environment variable GIT_SKIP_TESTS can be set like this: $ GIT_SKIP_TESTS='t1301 t4150.18' make test That is, its value can contain only the test script numbers, but not the full script name. Therefore, it is important that the test scripts are uniquely numbered. This makes it so. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>