| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jk/maint-status-porcelain-z-b:
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Conflicts:
wt-status.h
|
|
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When the "-z" option is given to status, we are supposed to
NUL-terminate each record. However, the "-b" code to show
the tracking branch did not respect this, and always ended
with a newline.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a i18n-specific comparison in t/t7508-status.sh to use
test_i18ncmp instead. This was introduced in v1.7.6.3~11^2 and has
been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-1.7.2-status-ignored:
git status --ignored: tests and docs
status: fix bug with missing --ignore files
Conflicts:
Documentation/git-status.txt
t/t7508-status.sh
|
|
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
|
|
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git status' should use --porcelain output format when -z is given.
It was not doing so since the _effect_ of using -z, namely that
null_termination would be set, was being checked _before_ option parsing
was performed.
So, move the check so that it is performed after option parsing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git status' is supplied the -z switch, and no output format has been
selected, it is supposed to use the --porcelain format. This does not
happen. Instead, the standard long format is used. Add a test to
demonstrate this failure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two tests looked for "[Uu]sage" in the output, but we cannot expect the
l10n to use that phrase. Mark them with test_i18ngrep so that in later
versions we can test truly localized versions with the same tests, not
just GETTEXT_POISON that happens to keep the original string in the
output.
Merge a few tests that were artificially split into "do" and "test output
under C_LOCALE_OUTPUT" in the original i18n patches back.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.
Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* aa/status-hilite-branch:
default color.status.branch to "same as header"
status: show branchname with a configurable color
|
|
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
|
|
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
|
|
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
|
|
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/advice-statushints:
wt-status: take advice.statusHints seriously
t7508: test advice.statusHints
Conflicts:
wt-status.c
|
|
Currently, status gives a lot of hints even when advice.statusHints is
false. Change this so that all hints depend on the config variable.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
edf563f (status: make "how to stage" messages optional, 2009-09-09)
introduced advice.statusHints without tests. Add a few tests to describe
and test the status quo.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was already the case before commit 9e4b7ab6 (git status: not
"commit --dry-run" anymore, 2009-08-15) with the difference that it died
at failure.
It got lost during the new implementation of "git status", which was
meant to only change behaviour when invoked with arguments.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the configuration variable status.submodulesummary is not 0 or
false, "git status" shows the submodule summary of the staged submodule
commits. But it did not show the summary of those commits not yet
staged in the supermodule, making it hard to see what will not be
committed.
The output of "submodule summary --for-status" has been changed from
"# Modified submodules:" to "# Submodule changes to be committed:" for
the already staged changes. "# Submodules changed but not updated:" has
been added for changes that will not be committed. This is much clearer
and consistent with the output for regular files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move a useful script function to decode colored output to
text form from t4034 and use it in this test as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new short status has been completely untested so far. Introduce
tests by duplicating all tests which are present for the long format.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes tentative "git stat" and make it take over "git status".
There are some tests that expect "git status" to exit with non-zero status
when there is something staged. Some tests expect "git status path..." to
show the status for a partial commit.
For these, replace "git status" with "git commit --dry-run". For the
ones that do not attempt a dry-run of a partial commit that check the
output from the command, check the output from "git status" as well, as
they should be identical.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to selectively skip tests, the environment variable GIT_SKIP_TESTS
can be set like this:
$ GIT_SKIP_TESTS='t1301 t4150.18' make test
That is, its value can contain only the test script numbers, but not the
full script name. Therefore, it is important that the test scripts are
uniquely numbered. This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Junio C Hamano
Brandon Casey
Aleksi Aalto
Matthieu Moy
Jens Lehmann
Michael J Gruber
Markus Heidelberg
Johannes Sixt