summaryrefslogtreecommitdiff
path: root/t/t7506-status-submodule.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30t7506: avoid checking for SHA-1-specific constantsLibravatar brian m. carlson1-4/+8
Adjust the test to sanitize the diffs and strip out object IDs from them, as it does for other object IDs, since we are not interested in the particular values used. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-09t7506: clean up .gitmodules properly before setting up new scenarioLibravatar Antonio Ospite1-1/+2
In t/t7506-status-submodule.sh at some point a new scenario is set up to test different things, in particular new submodules are added which are meant to completely replace the previous ones. However before calling the "git submodule add" commands for the new layout, the .gitmodules file is removed only from the working tree still leaving the previous content in current branch. This can break if, in the future, "git submodule add" starts differentiating between the following two cases: - .gitmodules is not in the working tree but it is in the current branch (it may not be safe to add new submodules in this case); - .gitmodules is neither in the working tree nor anywhere in the current branch (it is safe to add new submodules). Since the test intends to get rid of .gitmodules anyways, let's completely remove it from the current branch, to actually start afresh in the new scenario. This is more future-proof and does not break current tests. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16t7000-t7999: fix broken &&-chainsLibravatar Eric Sunshine1-5/+5
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14t: switch $_x40 to $OID_REGEXLibravatar brian m. carlson1-1/+1
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with larger hashes. This commit was created by using the following sed command to modify all files in the t directory except t/test-lib.sh: sed -i 's/\$_x40/$OID_REGEX/g' Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-07tests: fix diff order arguments in test_cmpLibravatar Stefan Beller1-2/+2
Fix the argument order for test_cmp. When given the expected result first the diff shows the actual output with '+' and the expectation with '-', which is the convention for our tests. Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-29submodule.c: correctly handle nested submodules in is_submodule_modifiedLibravatar Stefan Beller1-2/+2
Suppose I have a superproject 'super', with two submodules 'super/sub' and 'super/sub1'. 'super/sub' itself contains a submodule 'super/sub/subsub'. Now suppose I run, from within 'super': echo hi >sub/subsub/stray-file echo hi >sub1/stray-file Currently we get would see the following output in git-status: git status --short m sub ? sub1 With this patch applied, the untracked file in the nested submodule is displayed as an untracked file on the 'super' level as well. git status --short ? sub ? sub1 This doesn't change the output of 'git status --porcelain=1' for nested submodules, because its output is always ' M' for either untracked files or local modifications no matter the nesting level of the submodule. 'git status --porcelain=2' is affected by this change in a nested submodule, though. Without this patch it would report the direct submodule as modified and having no untracked files. With this patch it would report untracked files. Chalk this up as a bug fix. This bug fix also affects the default output (non-short, non-porcelain) of git-status, which is not tested here. Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-29short status: improve reporting for submodule changesLibravatar Stefan Beller1-0/+117
If I add an untracked file to a submodule or modify a tracked file, currently "git status --short" treats the change in the same way as changes to the current HEAD of the submodule: $ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit $ echo hello >gerrit/plugins/replication/stray-file $ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap $ git -C gerrit status --short M plugins/replication This is by analogy with ordinary files, where "M" represents a change that has not been added yet to the index. But this change cannot be added to the index without entering the submodule, "git add"-ing it, and running "git commit", so the analogy is counterproductive. Introduce new status letters " ?" and " m" for this. These are similar to the existing "??" and " M" but mean that the submodule (not the parent project) has new untracked files and modified files, respectively. The user can use "git add" and "git commit" from within the submodule to add them. Changes to the submodule's HEAD commit can be recorded in the index with a plain "git add -u" and are shown with " M", like today. To avoid excessive clutter, show at most one of " ?", " m", and " M" for the submodule. They represent increasing levels of change --- the last one that applies is shown (e.g., " m" if there are both modified files and untracked files in the submodule, or " M" if the submodule's HEAD has been modified and it has untracked files). While making these changes, we need to make sure to not break porcelain level 1, which shares code with "status --short". We only change "git status --short". Non-short "git status" and "git status --porcelain=2" already handle these cases by showing more detail: $ git -C gerrit status --porcelain=2 1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication $ git -C gerrit status [...] modified: plugins/replication (modified content, untracked content) Scripts caring about these distinctions should use --porcelain=2. Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27submodule.c: convert is_submodule_modified to use strbuf_getwholelineLibravatar Stefan Beller1-1/+17
Instead of implementing line reading yet again, make use of our beautiful library function to read one line. By using strbuf_getwholeline instead of strbuf_read, we avoid having to allocate memory for the entire child process output at once. That is, we limit maximum memory usage. Also we can start processing the output as it comes in, no need to wait for all of it. Once we know all information that we care about, we can terminate the child early. In that case we do not care about its exit code as well. By just closing our side of the pipe the child process will get a SIGPIPE signal, which it will not report nor do we report it in finish_command, ac78663b0d (run-command: don't warn on SIGPIPE deaths, 2015-12-29). Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19Merge branch 'jl/submodule-conflicted-gitmodules'Libravatar Junio C Hamano1-4/+88
* jl/submodule-conflicted-gitmodules: Submodules: Don't parse .gitmodules when it contains, merge conflicts test that git status works with merge conflict in, .gitmodules
2011-05-14Submodules: Don't parse .gitmodules when it contains, merge conflictsLibravatar Jens Lehmann1-3/+3
Commands like "git status", "git diff" and "git fetch" would fail when the .gitmodules file contained merge conflicts because the config parser would call die() when hitting the conflict markers: "fatal: bad config file line <n> in <path>/.gitmodules" While this behavior was on the safe side, it is really unhelpful to the user to have commands like status and diff fail, as these are needed to find out what's going on. And the error message is only mildly helpful, as it points to the right file but doesn't mention that it is unmerged. Users of git gui were not shown any conflicts at all when this happened. Improve the situation by checking if the index records .gitmodules as unmerged. When that is the case we can't make any assumptions about the configuration to be found there after the merge conflict is resolved by the user, so assume that all recursion is disabled unless .git/config or the global config say otherwise. As soon as the merge conflict is resolved and the .gitmodules file has been staged subsequent commands again honor any configuration done there. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-14test that git status works with merge conflict in, .gitmodulesLibravatar Heiko Voigt1-4/+88
For example: Two users independently adding a submodule will result in a merge conflict in .gitmodules. Since configuration of the status and diff machinery depends on the file being parseable they currently fail to produce useable output in case .gitmodules is marked with a merge conflict. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-14i18n: use test_i18ngrep in t7506Libravatar Junio C Hamano1-28/+28
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status "nothing to commit" messagesLibravatar Ævar Arnfjörð Bjarmason1-4/+4
Gettextize the "nothing to commit" messages. Many tests explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status basic messagesLibravatar Ævar Arnfjörð Bjarmason1-10/+10
Gettextize the most common git-status messages. Many tests checked for these explicitly. Change them to skip under GETTEXT_POISON=YesPlease. Some of the tests in t7508-status.sh needed to be split up when I added C_LOCALE_OUTPUT to them, since parts of them affected later tests (some of which aren't being skipped) indirectly. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10Teach diff --submodule and status to handle .git files in submodulesLibravatar Jens Lehmann1-0/+16
The simple test for an existing .git directory gives an incorrect result if .git is a file that records "gitdir: overthere". So for submodules that use a .git file, "git status" and the diff family - when the "--submodule" option is given - did assume the submodule was not populated at all when a .git file was used, thus generating wrong output or no output at all. This is fixed by using read_gitfile_gently() to get the correct location of the .git directory. While at it, is_submodule_modified() was cleaned up to use the "dir" member of "struct child_process" instead of setting the GIT_WORK_TREE and GIT_DIR environment variables. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-13git status: ignoring untracked files must apply to submodules tooLibravatar Jens Lehmann1-0/+5
Since 1.7.0 submodules are considered dirty when they contain untracked files. But when git status is called with the "-uno" option, the user asked to ignore untracked files, so they must be ignored in submodules too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES is introduced. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-12git status: Fix false positive "new commits" output for dirty submodulesLibravatar Jens Lehmann1-3/+81
Testing if the output "new commits" should appear in the long format of "git status" is done by comparing the hashes of the diffpair. This always resulted in printing "new commits" for submodules that contained untracked or modified content, even if they did not contain new commits. The reason was that match_stat_with_submodule() did set the "changed" flag for dirty submodules, resulting in two->sha1 being set to the null_sha1 at the call sites, which indicates that new commits are present. This is changed so that when no new commits are present, the same object names are in the sha1 field for both sides of the filepair, and the working tree side will have the "dirty_submodule" flag set when appropriate. For a submodule to be seen as modified even when it just has a dirty work tree, some conditions had to be extended to also check for the "dirty_submodule" flag. Unfortunately the test case that should have found this bug had been changed incorrectly too. It is fixed and extended to test for other combinations too. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-08git status: Show detailed dirty status of submodules in long formatLibravatar Jens Lehmann1-3/+3
Since 1.7.0 there are three reasons a submodule is considered modified against the work tree: It contains new commits, modified content or untracked content. Lets show all reasons in the long format of git status, so the user can better asses the nature of the modification. This change does not affect the short and porcelain formats. Two new members are added to "struct wt_status_change_data" to store the information gathered by run_diff_files(). wt-status.c uses the new flag DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed dirty information about submodules. A hint line for submodules is printed in the dirty header when dirty submodules are present. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16Show submodules as modified when they contain a dirty work treeLibravatar Jens Lehmann1-15/+68
Until now a submodule only then showed up as modified in the supermodule when the last commit in the submodule differed from the one in the index or the diffed against commit of the superproject. A dirty work tree containing new untracked or modified files in a submodule was undetectable when looking at it from the superproject. Now git status and git diff (against the work tree) in the superproject will also display submodules as modified when they contain untracked or modified files, even if the compared ref matches the HEAD of the submodule. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-22git status: not "commit --dry-run" anymoreLibravatar Junio C Hamano1-3/+3
This removes tentative "git stat" and make it take over "git status". There are some tests that expect "git status" to exit with non-zero status when there is something staged. Some tests expect "git status path..." to show the status for a partial commit. For these, replace "git status" with "git commit --dry-run". For the ones that do not attempt a dry-run of a partial commit that check the output from the command, check the output from "git status" as well, as they should be identical. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t7200 - t9001)Libravatar Nanako Shiraishi1-1/+1
Converts tests between t7201-t9001. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-04is_racy_timestamp(): do not check timestamp for gitlinksLibravatar Junio C Hamano1-1/+1
Because we do not even check the timestamp to determie if a gitlink is up to date or not, triggering the racy-timestamp check for gitlinks does not make sense. This fixes the recently added test in t7506. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-04Add t7506 to test submodule related functions for git-statusLibravatar Ping Yin1-0/+38
Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>