| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This documents "--verify" option of the commands. It can be used to re-enable
the hooks disabled by an earlier "--no-verify" in command-line.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/merge.c says that when we are about to perform a merge:
...the index must be in sync with the head commit. The strategies are
responsible to ensure this.
merge-recursive has always relied on unpack_trees() to enforce this
requirement, except in the case of an "Already up to date!" merge.
unpack-trees.c does not actually enforce this requirement, though. It
allows for a pair of exceptions, in cases which it refers to as #14(ALT)
and #2ALT. Documentation/technical/trivial-merge.txt can be consulted for
the precise meanings of the various case numbers and their meanings for
unpack-trees.c, but we have a high-level description of the intent behind
these two exceptions in a combined and summarized form in
Documentation/git-merge.txt:
...[merge will] abort if there are any changes registered in the index
relative to the `HEAD` commit. (One exception is when the changed index
entries are in the state that would result from the merge already.)
While this high-level description does describe conditions under which it
would be safe to allow the index to diverge from HEAD, it does not match
what is actually implemented. In particular, unpack-trees.c has no
knowledge of renames, and these two exceptions were written assuming that
no renames take place. Once renames get into the mix, it is no longer
safe to allow the index to not match for #2ALT. We could modify
unpack-trees to only allow #14(ALT) as an exception, but that would be
more strict than required for the resolve strategy (since the resolve
strategy doesn't handle renames at all). Therefore, unpack_trees.c seems
like the wrong place to fix this.
Further, if someone fixes the combination of break and rename detection
and modifies merge-recursive to take advantage of the combination, then it
will also no longer be safe to allow the index to not match for #14(ALT)
when the recursive strategy is in use. Therefore, leaving one of the
exceptions in place with the recursive merge strategy feels like we are
just leaving a latent bug in the code for folks in the future to stumble
across.
It may be possible to fix both unpack-trees and merge-recursive in a way
that implements the exception as stated in Documentation/git-merge.txt,
but it would be somewhat complex, possibly also buggy at first, and
ultimately, not all that valuable. Instead, just enforce the requirement
stated in builtin/merge.c; error out if the index does not match the HEAD
commit, just like the 'ours' and 'octopus' strategies do.
Some testcase fixups were in order:
t7611: had many tests designed to show that `git merge --abort` could
not always restore the index and working tree to the state they
were in before the merge started. The tests that were associated
with having changes in the index before the merge started are no
longer applicable, so they have been removed.
t7504: had a few tests that had stray staged changes that were not
actually part of the test under consideration
t6044: We no longer expect stray staged changes to sometimes result
in the merge continuing. Also, fix a case where a merge
didn't abort but should have.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to 65969d43d1 (merge: honor prepare-commit-msg hook, 2011-02-14)
merge should also honor the commit-msg hook: When a merge is stopped due
to conflicts or --no-commit, the subsequent commit calls the commit-msg
hook. However, it is not called after a clean merge. Fix this
inconsistency by invoking the hook after clean merges as well.
This change is motivated by Gerrit's commit-msg hook to install a ChangeId
trailer into the commit message. Without such a ChangeId, Gerrit refuses
to accept any commit by default, such that the inconsistency of (not)
running the commit-msg hook between commit and merge leads to confusion
and might block people from getting their work done.
As the githooks man page is very vocal about the possibility of skipping
the commit-msg hook via the --no-verify option, implement the option
in merge, too.
'git merge --continue' is currently implemented as calling cmd_commit
with no further arguments. This works for most other merge related options,
such as demonstrated via the --allow-unrelated-histories flag in the
test. The --no-verify option however is not remembered across invocations
of git-merge. Originally the author assumed an alternative in which the
'git merge --continue' command accepts the --no-verify flag, but that
opens up the discussion which flags are allows to the continued merge
command and which must be given in the first invocation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `reword` command used to call `git commit` in a manner that asks for
the prepare-commit-msg and commit-msg hooks to do their thing.
Converting that part of the interactive rebase to C code introduced the
regression where those hooks were no longer run.
Let's fix this.
Note: the flag is called `VERIFY_MSG` instead of the more intuitive
`RUN_COMMIT_MSG_HOOKS` to indicate that the flag suppresses the
`--no-verify` flag (which may do other things in the future in addition
to suppressing the commit message hooks, too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `reword` command of an interactive rebase used to call the
commit-msg hooks, but that regressed when we switched to the
rebase--helper backed by the sequencer.
Noticed by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Supplement the existing tests for the commit-msg hook (which all use
"git commit -m") with tests which use an interactive editor (no -m
switch) to ensure that all code paths get tested.
At the same time the quoting of some of the existing tests is changed
to conform to Junio's recommendations for test style (single quotes
used around the test unless there is a compelling reason not to, and
the opening quote on the same line as the test_expect and the closing
quote in column 1).
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As desired, these pass for git-commit.sh, fail for builtin-commit (prior
to the fixes), and succeeded for builtin-commit (after the fixes).
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Alex Riesen
Johannes Schindelin
Elijah Newren
Stefan Beller
Elia Pinto
Johannes Sixt
Stephan Beyer
Bryan Donlan
Junio C Hamano
Wincent Colaiuta