summaryrefslogtreecommitdiff
path: root/t/t7501-commit.sh
AgeCommit message (Collapse)AuthorFilesLines
2010-03-12commit --amend: copy notes to the new commitLibravatar Thomas Rast1-0/+12
Teaches 'git commit --amend' to copy notes. The catch is that this must also be guarded by --no-post-rewrite, which we use to prevent --amend from copying notes during a rebase -i 'edit'/'reword'. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jk/warn-author-committer-after-commit'Libravatar Junio C Hamano1-1/+5
* jk/warn-author-committer-after-commit: user_ident_sufficiently_given(): refactor the logic to be usable from elsewhere commit.c::print_summary: do not release the format string too early commit: allow suppression of implicit identity advice commit: show interesting ident information in summary strbuf: add strbuf_addbuf_percentquote strbuf_expand: convert "%%" to "%" Conflicts: builtin-commit.c ident.c
2010-01-14commit: show interesting ident information in summaryLibravatar Jeff King1-1/+5
There are a few cases of user identity information that we consider interesting: (1) When the author and committer identities do not match. (2) When the committer identity was picked automatically from the username, hostname and GECOS information. In these cases, we already show the information in the commit message template. However, users do not always see that template because they might use "-m" or "-F". With this patch, we show these interesting cases after the commit, along with the subject and change summary. The new output looks like: $ git commit \ -m "federalist papers" \ --author='Publius <alexander@hamilton.com>' [master 3d226a7] federalist papers Author: Publius <alexander@hamilton.com> 1 files changed, 1 insertions(+), 0 deletions(-) for case (1), and: $ git config --global --unset user.name $ git config --global --unset user.email $ git commit -m foo [master 7c2a927] foo Committer: Jeff King <peff@c-71-185-130-222.hsd1.va.comcast.net> Your name and email address were configured automatically based on your username and hostname. Please check that they are accurate. You can suppress this message by setting them explicitly: git config --global user.name Your Name git config --global user.email you@example.com If the identity used for this commit is wrong, you can fix it with: git commit --amend --author='Your Name <you@example.com>' 1 files changed, 1 insertions(+), 0 deletions(-) for case (2). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-03builtin-commit: add --date optionLibravatar Miklos Vajna1-0/+15
This is like --author: allow a user to specify a given date without using the GIT_AUTHOR_DATE environment variable. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-13Do not use VISUAL editor on dumb terminalsLibravatar Jonathan Nieder1-4/+4
Refuse to use $VISUAL and fall back to $EDITOR if TERM is unset or set to "dumb". Traditionally, VISUAL is set to a screen editor and EDITOR to a line-based editor, which should be more useful in that situation. vim, for example, is happy to assume a terminal supports ANSI sequences even if TERM is dumb (e.g., when running from a text editor like Acme). git already refuses to fall back to vi on a dumb terminal if GIT_EDITOR, core.editor, VISUAL, and EDITOR are unset, but without this patch, that check is suppressed by VISUAL=vi. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-28commit: More generous accepting of RFC-2822 footer lines.Libravatar David Brown1-0/+41
'git commit -s' will insert a blank line before the Signed-off-by line at the end of the message, unless this last line is a Signed-off-by line itself. Common use has other trailing lines at the ends of commit text, in the style of RFC2822 headers. Be more generous in considering lines to be part of this footer. If the last paragraph of the commit message reasonably resembles RFC-2822 formatted lines, don't insert that blank line. The new Signed-off-by line is still only suppressed when the author's existing Signed-off-by is the last line of the message. Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-08tests: skip perl tests if NO_PERL is definedLibravatar Jeff King1-2/+2
These scripts all test git programs that are written in perl, and thus obviously won't work if NO_PERL is defined. We pass NO_PERL to the scripts from the building Makefile via the GIT-BUILD-OPTIONS file. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-10t7501-commit.sh: explicitly check that -F prevents invoking the editorLibravatar Adeodato Simó1-0/+20
The "--signoff" test case in t7500-commit.sh was setting VISUAL while using -F -, which indeed tested that the editor is not spawned with -F. However, having it there was confusing, since there was no obvious reason to the casual reader for it to be there. This commits removes the setting of VISUAL from the --signoff test, and adds in t7501-commit.sh a dedicated test case, where the rest of tests for -F are. Signed-off-by: Adeodato Simó <dato@net.com.org.es> Okay-then-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-10t7501: always use test_cmp instead of diffLibravatar Miklos Vajna1-6/+6
This should make the output more readable (by default using diff -u) when some tests fail. Also changed the diff order from "current expected" to "expected current". Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t7200 - t9001)Libravatar Nanako Shiraishi1-24/+24
Converts tests between t7201-t9001. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-9/+9
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Merge branch 'bd/tests'Libravatar Junio C Hamano1-4/+4
* bd/tests: Rename the test trash directory to contain spaces. Fix tests breaking when checkout path contains shell metacharacters Don't use the 'export NAME=value' in the test scripts. lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters test-lib.sh: Fix some missing path quoting Use test_set_editor in t9001-send-email.sh test-lib.sh: Add a test_set_editor function to safely set $VISUAL git-send-email.perl: Handle shell metacharacters in $EDITOR properly config.c: Escape backslashes in section names properly git-rebase.sh: Fix --merge --abort failures when path contains whitespace Conflicts: t/t9115-git-svn-dcommit-funky-renames.sh
2008-05-13fix bsd shell negationLibravatar Jeff King1-1/+1
On some shells (notably /bin/sh on FreeBSD 6.1), the construct foo && ! bar | baz is true if foo && baz whereas for most other shells (such as bash) is true if foo && ! baz We can work around this by specifying foo && ! (bar | baz) which works everywhere. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-4/+4
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13add test_cmp function for test scriptsLibravatar Jeff King1-7/+7
Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-03Merge branch 'maint'Libravatar Junio C Hamano1-0/+18
* maint: Fix "git-commit -C $tag" Documentation/git-stash.txt: Adjust SYNOPSIS command syntax (2)
2008-02-03Fix "git-commit -C $tag"Libravatar Junio C Hamano1-0/+18
The scripted version might not have handled this correctly either, but the version rewritten in C definitely does not grok this and complains $tag is not a commit object. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-20/+20
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-14commit: allow --amend to reuse message from another commitLibravatar Junio C Hamano1-0/+17
After tentatively applying a patch from a contributor, you can get a replacement patch with corrected code and unusable commit log message. In such a case, this sequence ought to give you an editor based on the message in the earlier commit, to let you describe an incremental improvement: git reset --hard HEAD^ ;# discard the earlier one git am <corrected-patch git commit --amend -c HEAD@{1} Unfortunately, --amend insisted reusing the message from the commit being amended, ignoring the -c option. This corrects it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-09Add tests for pre-commit and commit-msg hooksLibravatar Wincent Colaiuta1-1/+1
As desired, these pass for git-commit.sh, fail for builtin-commit (prior to the fixes), and succeeded for builtin-commit (after the fixes). Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-04Merge branch 'kh/commit'Libravatar Junio C Hamano1-0/+27
* kh/commit: (33 commits) git-commit --allow-empty git-commit: Allow to amend a merge commit that does not change the tree quote_path: fix collapsing of relative paths Make git status usage say git status instead of git commit Fix --signoff in builtin-commit differently. git-commit: clean up die messages Do not generate full commit log message if it is not going to be used Remove git-status from list of scripts as it is builtin Fix off-by-one error when truncating the diff out of the commit message. builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well. Add a few more tests for git-commit builtin-commit: Include the diff in the commit message when verbose. builtin-commit: fix partial-commit support Fix add_files_to_cache() to take pathspec, not user specified list of files Export three helper functions from ls-files builtin-commit: run commit-msg hook with correct message file builtin-commit: do not color status output shown in the message template file_exists(): dangling symlinks do exist Replace "runstatus" with "status" in the tests t7501-commit: Add test for git commit <file> with dirty index. ...
2007-12-03git-commit --allow-emptyLibravatar Junio C Hamano1-0/+7
It does not usually make sense to record a commit that has the exact same tree as its sole parent commit and that is why git-commit prevents you from making such a mistake, but when data from foreign scm is involved, it is a different story. We are equipped to represent such an (perhaps insane, perhaps by mistake, or perhaps done on purpose) empty change, and it is better to represent it bypassing the safety valve for native use. This is primarily for use by foreign scm interface scripts. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03git-commit: Allow to amend a merge commit that does not change the treeLibravatar Johannes Sixt1-0/+32
Normally, it should not be allowed to generate an empty commit. A merge commit generated with git 'merge -s ours' does not change the tree (along the first parent), but merges are not "empty" even if they do not change the tree. Hence, commit 8588452ceb7 allowed to amend a merge commit that does not change the tree, but 4fb5fd5d301 disallowed it again in an attempt to avoid that an existing commit is amended such that it becomes empty. With this change, a commit can be edited (create a new one or amend an existing one) either if there are changes or if there are at least two parents. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-24Merge branch 'js/mingw-fallouts'Libravatar Junio C Hamano1-2/+4
* js/mingw-fallouts: fetch-pack: Prepare for a side-band demultiplexer in a thread. rehabilitate some t5302 tests on 32-bit off_t machines Allow ETC_GITCONFIG to be a relative path. Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG. Allow a relative builtin template directory. Close files opened by lock_file() before unlinking. builtin run_command: do not exit with -1. Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h. Use is_absolute_path() in sha1_file.c. Skip t3902-quoted.sh if the file system does not support funny names. t5302-pack-index: Skip tests of 64-bit offsets if necessary. t7501-commit.sh: Not all seds understand option -i t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
2007-11-22t7501-commit: Add test for git commit <file> with dirty index.Libravatar Kristian Høgsberg1-0/+10
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22Add testcase for amending and fixing author in git commit.Libravatar Kristian Høgsberg1-0/+15
We used to clobber author time, but we shouldn't. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22Merge branch 'maint'Libravatar Junio C Hamano1-0/+0
* maint: Make test scripts executable. bundle create: keep symbolic refs' names instead of resolving them
2007-11-22Make test scripts executable.Libravatar Junio C Hamano1-0/+0
2007-11-14t7501-commit.sh: Not all seds understand option -iLibravatar Johannes Sixt1-2/+4
Use mv instead. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-14Merge branch 'bs/maint-commit-options'Libravatar Junio C Hamano1-0/+10
* bs/maint-commit-options: git-commit: Add tests for invalid usage of -a/--interactive with paths git-commit.sh: Fix usage checks regarding paths given when they do not make sense
2007-11-12git-commit: Add tests for invalid usage of -a/--interactive with pathsLibravatar Björn Steinbrink1-0/+10
git-commit was/is broken in that it accepts paths together with -a or --interactive, which it shouldn't. There tests check those usage errors. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-10git-commit: a bit more testsLibravatar Junio C Hamano1-0/+69
Add tests for -s (sign-off) and multiple -m options Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-17git-commit: partial commit of paths only removed from the indexLibravatar Junio C Hamano1-2/+13
Because a partial commit is meant to be a way to ignore what are staged in the index, "git rm --cached A && git commit A" should just record what is in A on the filesystem. The previous patch made the command sequence to barf, saying that A has not been added yet. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-17git-commit: Allow partial commit of file removal.Libravatar Junio C Hamano1-0/+21
When making a partial commit, git-commit uses git-ls-files with the --error-unmatch option to expand and sanity check the user supplied path patterns. When any path pattern does not match with the paths known to the index, it errors out, in order to catch a common mistake to say "git commit Makefiel cache.h" and end up with a commit that touches only cache.h (notice the misspelled "Makefile"). This detection however does not work well when the path has already been removed from the index. If you drop a path from the index and try to commit that partially, i.e. $ git rm COPYING $ git commit -m 'Remove COPYING' COPYING the command complains because git does not know anything about COPYING anymore. This introduces a new option --with-tree to git-ls-files and uses it in git-commit when we build a temporary index to write a tree object for the partial commit. When --with-tree=<tree-ish> option is specified, names from the given tree are added to the set of names the index knows about, so we can treat COPYING file in the example as known. Of course, there is no reason to use "git rm" and git-aware people have long time done: $ rm COPYING $ git commit -m 'Remove COPYING' COPYING which works just fine. But this caused a constant confusion. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-14git-commit: partial commit of paths only removed from the indexLibravatar Junio C Hamano1-2/+13
Because a partial commit is meant to be a way to ignore what are staged in the index, "git rm --cached A && git commit A" should just record what is in A on the filesystem. The previous patch made the command sequence to barf, saying that A has not been added yet. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-12git-commit: Allow partial commit of file removal.Libravatar Junio C Hamano1-0/+21
When making a partial commit, git-commit uses git-ls-files with the --error-unmatch option to expand and sanity check the user supplied path patterns. When any path pattern does not match with the paths known to the index, it errors out, in order to catch a common mistake to say "git commit Makefiel cache.h" and end up with a commit that touches only cache.h (notice the misspelled "Makefile"). This detection however does not work well when the path has already been removed from the index. If you drop a path from the index and try to commit that partially, i.e. $ git rm COPYING $ git commit -m 'Remove COPYING' COPYING the command complains because git does not know anything about COPYING anymore. This introduces a new option --with-tree to git-ls-files and uses it in git-commit when we build a temporary index to write a tree object for the partial commit. When --with-tree=<tree-ish> option is specified, names from the given tree are added to the set of names the index knows about, so we can treat COPYING file in the example as known. Of course, there is no reason to use "git rm" and git-aware people have long time done: $ rm COPYING $ git commit -m 'Remove COPYING' COPYING which works just fine. But this caused a constant confusion. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01git-commit.sh: Permit the --amend message to be given with -m/-c/-C/-F.Libravatar Junio C Hamano1-3/+3
[jc: adjusted t/t7501 as this makes -F and --amend compatible] Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-31Add test case for basic commit functionality.Libravatar Kristian Høgsberg1-0/+134
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>