summaryrefslogtreecommitdiff
path: root/t/t7406-submodule-update.sh
AgeCommit message (Collapse)AuthorFilesLines
2012-09-11Merge branch 'sz/submodule-force-update' into maint-1.7.11Libravatar Junio C Hamano1-0/+12
* sz/submodule-force-update: Make 'git submodule update --force' always check out submodules.
2012-09-11Merge branch 'jc/maint-t7406-rev-parse-max-count-huh' into maint-1.7.11Libravatar Junio C Hamano1-8/+8
* jc/maint-t7406-rev-parse-max-count-huh: t7406: fix misleading "rev-parse --max-count=1 HEAD"
2012-08-24Make 'git submodule update --force' always check out submodules.Libravatar Stefan Zager1-0/+12
Currently, it will only do a checkout if the sha1 registered in the containing repository doesn't match the HEAD of the submodule, regardless of whether the submodule is dirty. As discussed on the mailing list, the '--force' flag is a strong indicator that the state of the submodule is suspect, and should be reset to HEAD. Signed-off-by: Stefan Zager <szager@google.com> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-30t7406: fix misleading "rev-parse --max-count=1 HEAD"Libravatar Junio C Hamano1-8/+8
The test happened to use "rev-parse --max-count=1 HEAD" consistently to prepare the expected output and the actual output, so the comparison between them gave us a correct success/failure because both output had irrelevant "--max-count=1" in it. But that is not an excuse to keep it broken. Replace it a more meaningful construct "rev-parse --verify HEAD". Noticed by Daniel Graña while working on his submodule tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-12submodules: don't stumble over symbolic links when cloning recursivelyLibravatar Jens Lehmann1-0/+13
Since 69c3051 (submodules: refactor computation of relative gitdir path) cloning a submodule recursively fails for nested submodules when a symbolic link is part of the path to the work tree of the superproject. This happens when module_clone() tries to find the relative paths between the work tree and the git dir. When a symbolic link in current $PWD points to a directory that is at a different level, then determining the number of "../" needed to traverse to the superproject's work tree leads to a wrong result. As there is no portable way to say "pwd -P", use cd_to_toplevel to remove the link from $PWD, which fixes this problem. A test for this issue has been added to t7406. Reported-by: Bob Halley <halley@play-bow.org> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-04submodules: refactor computation of relative gitdir pathLibravatar Jens Lehmann1-0/+17
In module_clone() the rel_gitdir variable was computed differently when "git rev-parse --git-dir" returned a relative path than when it returned an absolute path. This is not optimal, as different code paths are used depending on the return value of that command. Fix that by reusing the differing path components computed for setting the core.worktree config setting, which leaves a single code path for setting both instead of having three and makes the code much shorter. This also fixes the bug that in the computation of how many directories have to be traversed up to hit the root directory of the submodule the name of the submodule was used where the path should have been used. This lead to problems after renaming submodules into another directory level. Even though the "(cd $somewhere && pwd)" approach breaks the flexibility of symlinks, that is no issue here as we have to have one relative path pointing from the work tree to the gitdir and another pointing back, which will never work anyway when a symlink along one of those paths is changed because the directory it points to was moved. Also add a test moving a submodule into a deeper directory to catch any future breakage here and to document what has to be done when a submodule needs to be moved until git mv learns to do that. Simply moving it to the new location doesn't work, as the core.worktree and possibly the gitfile setting too will be wrong. So it has to be removed from filesystem and index, then the new location has to be added into the index and the .gitmodules file has to be updated. After that a git submodule update will check out the submodule at the new location. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-24submodule add: fix breakage when re-adding a deep submoduleLibravatar Jens Lehmann1-0/+8
Since recently a submodule with name <name> has its git directory in the .git/modules/<name> directory of the superproject while the work tree contains a gitfile pointing there. When the same submodule is added on a branch where it wasn't present so far (it is not found in the .gitmodules file), the name is not initialized from the path as it should. This leads to a wrong path entered in the gitfile when the .git/modules/<name> directory is found, as this happily uses the - now empty - name. It then always points only a single directory up, even if we have a path deeper in the directory hierarchy. Fix that by initializing the name of the submodule early in module_clone() if module_name() returned an empty name and add a test to catch that bug. Reported-by: Jehan Bing <jehan@orb.com> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-10Merge branch 'hv/submodule-update-none'Libravatar Junio C Hamano1-0/+62
* hv/submodule-update-none: add update 'none' flag to disable update of submodule by default submodule: move update configuration variable further up
2011-08-22Move git-dir for submodulesLibravatar Fredrik Gustafsson1-0/+107
Move git-dir for submodules into $GIT_DIR/modules/[name_of_submodule] of the superproject. This is a step towards being able to delete submodule directories without loosing the information from their .git directory as that is now stored outside the submodules work tree. This is done relying on the already existent .git-file functionality. When adding or updating a submodule whose git directory is found under $GIT_DIR/modules/[name_of_submodule], don't clone it again but simply point the .git-file to it and remove the now stale index file from it. The index will be recreated by the following checkout. This patch will not affect already cloned submodules at all. Tests that rely on .git being a directory have been fixed. Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com> Mentored-by: Jens Lehmann <Jens.Lehmann@web.de> Mentored-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-11add update 'none' flag to disable update of submodule by defaultLibravatar Heiko Voigt1-0/+62
This is useful to mark a submodule as unneeded by default. When this option is set and the user wants to work with such a submodule he needs to configure 'submodule.<name>.update=checkout' or pass the --checkout option. Then the submodule can be handled like a normal submodule. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-13Merge branch 'fg/submodule-keep-updating'Libravatar Junio C Hamano1-0/+144
* fg/submodule-keep-updating: git-submodule.sh: clarify the "should we die now" logic submodule update: continue when a checkout fails git-sh-setup: add die_with_status Conflicts: git-submodule.sh
2011-06-13submodule update: continue when a checkout failsLibravatar Fredrik Gustafsson1-0/+144
"git submodule update" stops at the first error and gives control back to the user. Only after the user fixes the problematic submodule and runs "git submodule update" again, the second error is found. And the user needs to repeat until all the problems are found and fixed one by one. This is tedious. Instead, the command can remember which submodules it had trouble with, continue updating the ones it can, and report which ones had errors at the end. The user can run "git submodule update", find all the ones that need minor fixing (e.g. working tree was dirty) to fix them in a single pass. Then another "git submodule update" can be run to update all. Note that the problematic submodules are skipped only when they are to be integrated with a safer value of submodule.<name>.update option, namely "checkout". Fixing a failure in a submodule that uses "rebase" or "merge" may need an involved conflict resolution by the user, and leaving too many submodules in states that need resolution would not reduce the mental burden on the user. Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com> Mentored-by: Jens Lehmann <Jens.Lehmann@web.de> Mentored-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-21i18n: git-submodule $update_module say + die messagesLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Gettextize $update_module say and die messages. These messages needed to be split up to make them translatable. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-02Merge branch 'nm/submodule-update-force'Libravatar Junio C Hamano1-0/+23
* nm/submodule-update-force: submodule: Add --force option for git submodule update Conflicts: t/t7406-submodule-update.sh
2011-04-04Merge branch 'jl/submodule-fetch-on-demand'Libravatar Junio C Hamano1-0/+20
* jl/submodule-fetch-on-demand: fetch/pull: Describe --recurse-submodule restrictions in the BUGS section submodule update: Don't fetch when the submodule commit is already present fetch/pull: Don't recurse into a submodule when commits are already present Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option config: teach the fetch.recurseSubmodules option the 'on-demand' value fetch/pull: Add the 'on-demand' value to the --recurse-submodules option fetch/pull: recurse into submodules when necessary Conflicts: builtin/fetch.c submodule.c
2011-04-04submodule: Add --force option for git submodule updateLibravatar Nicolas Morey-Chaisemartin1-0/+23
By default git submodule update runs a simple checkout on submodules that are not up-to-date. If the submodules contains modified or untracked files, the command may exit sanely with an error: $ git submodule update error: Your local changes to the following files would be overwritten by checkout: file Please, commit your changes or stash them before you can switch branches. Aborting Unable to checkout '1b69c6e55606b48d3284a3a9efe4b58bfb7e8c9e' in submodule path 'test1' In order to reset a whole git submodule tree, a user has to run first 'git submodule foreach --recursive git checkout -f' and then run 'git submodule update'. This patch adds a --force option for the update command (only used for submodules without --rebase or --merge options). It passes the --force option to git checkout which will throw away the local changes. Signed-off-by: Nicolas Morey-Chaisemartin <nmorey@kalray.eu> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09submodule update: Don't fetch when the submodule commit is already presentLibravatar Jens Lehmann1-0/+20
If the commit to be checked out on "git submodule update" has already been fetched in the submodule there is no need to run "git fetch" again. Since "git fetch" recently learned recursion (and the new on-demand mode to fetch commits recorded in the superproject is enabled by default) this will happen pretty often, thereby making the unconditional fetch during "git submodule update" unnecessary. If the commit is not present in the submodule (e.g. the user disabled the fetch on-demand mode) the fetch will be run as before. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-17t7406: "git submodule update {--merge|--rebase]" with new submodulesLibravatar Spencer E. Olson1-0/+52
Add two test cases in t7406 to ensure that the --merge/--rebase options are ignored for "git submodule update" with new modules. These test that a simple checkout is performed instead. Signed-off-by: Spencer E. Olson <olsonse@umich.edu> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-03t7406 & t7407: add missing && at end of linesLibravatar Jens Lehmann1-1/+1
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-06t7406: Fix submodule init config testsLibravatar Stephen Boyd1-8/+16
These tests have been broken since they were introduced in commits ca2cedb (git-submodule: add support for --rebase., 2009-04-24) and 42b4917 (git-submodule: add support for --merge., 2009-06-03). 'git submodule init' expects the submodules to exist in the index. In this case, the submodules don't exist and therefore looking for the submodules will always fail. To make matters worse, git submodule fails visibly to the user by saying: error: pathspec 'rebasing' did not match any file(s) known to git. Did you forget to 'git add'? but doesn't return an error code. This allows the test to fail silently. Fix it by adding the submodules first. Cc: Johan Herland <johan@herland.net> Cc: Peter Hutterer <peter.hutterer@who-t.net> Cc: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-29t3409 t4107 t7406 t9150: use dashless commandsLibravatar Matthew Ogilvie1-2/+2
This is needed to allow test suite to run against a standard install bin directory instead of GIT_EXEC_PATH. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-03git-submodule: add support for --merge.Libravatar Johan Herland1-1/+59
'git submodule update --merge' merges the commit referenced by the superproject into your local branch, instead of checking it out on a detached HEAD. As evidenced by the addition of "git submodule update --rebase", it is useful to provide alternatives to the default 'checkout' behaviour of "git submodule update". One such alternative is, when updating a submodule to a new commit, to merge that commit into the current local branch in that submodule. This is useful in workflows where you want to update your submodule from its upstream, but you cannot use --rebase, because you have downstream people working on top of your submodule branch, and you don't want to disrupt their work. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-03Rename submodule.<name>.rebase to submodule.<name>.updateLibravatar Johan Herland1-8/+8
The addition of "submodule.<name>.rebase" demonstrates the usefulness of alternatives to the default behaviour of "git submodule update". However, by naming the config variable "submodule.<name>.rebase", and making it a boolean choice, we are artificially constraining future git versions that may want to add _more_ alternatives than just "rebase". Therefore, while "submodule.<name>.rebase" is not yet in a stable git release, future-proof it, by changing it from submodule.<name>.rebase = true/false to submodule.<name>.update = rebase/checkout where "checkout" specifies the default behaviour of "git submodule update" (checking out the new commit to a detached HEAD), and "rebase" specifies the --rebase behaviour (where the current local branch in the submodule is rebase onto the new commit). Thus .update == checkout is equivalent to .rebase == false, and .update == rebase is equivalent to .rebase == true. Finally, leaving .update unset is equivalent to leaving .rebase unset. In future git versions, other alternatives to "git submodule update" behaviour can be included by adding them to the list of allowable values for the submodule.<name>.update variable. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-24git-submodule: add support for --rebase.Libravatar Peter Hutterer1-0/+140
'git submodule update --rebase' rebases your local branch on top of what would have been checked out to a detached HEAD otherwise. In some cases, detaching the HEAD when updating a submodule complicates the workflow to commit to this submodule (checkout master, rebase, then commit). For submodules that require frequent updates but infrequent (if any) commits, a rebase can be executed directly by the git-submodule command, ensuring that the submodules stay on their respective branches. git-config key: submodule.$name.rebase (bool) Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>