| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Test clean-up and corrections.
* es/test-fixes: (26 commits)
t5608: fix broken &&-chain
t9119: fix broken &&-chains
t9000-t9999: fix broken &&-chains
t7000-t7999: fix broken &&-chains
t6000-t6999: fix broken &&-chains
t5000-t5999: fix broken &&-chains
t4000-t4999: fix broken &&-chains
t3030: fix broken &&-chains
t3000-t3999: fix broken &&-chains
t2000-t2999: fix broken &&-chains
t1000-t1999: fix broken &&-chains
t0000-t0999: fix broken &&-chains
t9814: simplify convoluted check that command correctly errors out
t9001: fix broken "invoke hook" test
t7810: use test_expect_code() instead of hand-rolled comparison
t7400: fix broken "submodule add/reconfigure --force" test
t7201: drop pointless "exit 0" at end of subshell
t6036: fix broken "merge fails but has appropriate contents" tests
t5505: modernize and simplify hard-to-digest test
t5406: use write_script() instead of birthing shell script manually
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test has been dysfunctional since it was added by 619acfc78c
(submodule add: extend force flag to add existing repos, 2016-10-06),
however, two problems early in the test went unnoticed due to a broken
&&-chain later in the test.
First, it tries configuring the submodule with repository "bogus-url",
however, "git submodule add" insists that the repository be either an
absolute URL or a relative pathname requiring prefix "./" or "../" (this
is true even with --force), but "bogus-url" does not meet those
criteria, thus the command fails.
Second, it then tries configuring a submodule with a path which is
.gitignore'd, which is disallowed. This restriction can be overridden
with --force, but the test neglects to use that option.
Fix both problems, as well as the broken &&-chain behind which they hid.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cf/submodule-progress-dissociate:
t7400: encapsulate setup code in test_expect_success
|
|
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
|
|
The '--progress' was introduced in 72c5f88311d (clone: pass --progress
decision to recursive submodules, 2016-09-22) to fix the progress reporting
of the clone command. Also add the progress option to the 'submodule add'
command. The update command already supports the progress flag, but it
is not documented.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we can't find a ref store for a submodule then assume the latter
is not initialized (or was removed). Print a status line accordingly
instead of causing a segmentation fault by passing NULL as the first
parameter of refs_head_ref().
Reported-by: Jeremy Feusi <jeremy@feusi.co>
Reviewed-by: Stefan Beller <sbeller@google.com>
Initial-Test-By: Stefan Beller <sbeller@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
|
|
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check for configuration parsing errors in '.gitmodules' in t7411, which
is explicitly testing the submodule-config subsystem, instead of in
t7400. Also explicitly use the test helper instead of relying on the
gitmodules file from being read in status.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A hotfix to a topic that is already in v2.13.
* bw/submodule-with-bs-path:
t7400: add !CYGWIN prerequisite to 'add with \\ in path'
|
|
A hotfix to a topic that is already in v2.13.
* bw/submodule-with-bs-path:
t7400: add !CYGWIN prerequisite to 'add with \\ in path'
|
|
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
|
|
Commit cf9e55f494 ("submodule: prevent backslash expantion in submodule
names", 07-04-2017) added a test which creates a git repository with
some backslash characters in the name. On windows, where the backslash
character is a directory separator, it is not possible to create a
repository with the name 'sub\with\backslash'. (The NTFS filesystem would
probably allow it, but the win32 api does not). The MinGW and Git for
Windows versions of git actually create a repository called 'backslash'
in the sub-directory 'sub/with'.
On cygwin, however, due to the slightly schizophrenic treatment of the
backslash character by cygwin-git, this test fails at the 'git init'
stage. The git-init command does not recognise the directory separators
in the input path (eg. is_dir_sep('\\') is false), so it does not
attempt to create the leading directories 'sub/with'. (The call to
mkdir('sub\\with\\backslash') actually does recognise the directory
separators, but fails because the 'sub/with' directory doesn't exist).
In order to suppress the test failure (for now), add the !CYGWIN test
prerequisite.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When attempting to add a submodule with backslashes in its name 'git
submodule' fails in a funny way. We can see that some of the
backslashes are expanded resulting in a bogus path:
git -C main submodule add ../sub\\with\\backslash
fatal: repository '/tmp/test/sub\witackslash' does not exist
fatal: clone of '/tmp/test/sub\witackslash' into submodule path
To solve this, convert calls to 'read' to 'read -r' in git-submodule.sh
in order to prevent backslash expantion in submodule names.
Reported-by: Joachim Durchholz <jo@durchholz.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the force flag in `git submodule add` takes care of possibly
ignored files or when a name collision occurs.
However there is another situation where submodule add comes in handy:
When you already have a gitlink recorded, but no configuration was
done (i.e. no .gitmodules file nor any entry in .git/config) and you
want to generate these config entries. For this situation allow
`git submodule add` to proceed if there is already a submodule at the
given path in the index.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
|
|
Update of "git submodule" to move pieces of logic to C continues.
* sb/submodule-init:
submodule init: redirect stdout to stderr
submodule--helper update-clone: abort gracefully on missing .gitmodules
submodule init: fail gracefully with a missing .gitmodules file
submodule: port init from shell to C
submodule: port resolve_relative_url from shell to C
|
|
* sb/submodule-module-list-pathspec-fix:
submodule deinit test: fix broken && chain in subshell
|
|
The discussion in [1] pointed out that '.' is a faulty suggestion as
there is a corner case where it fails:
> "submodule deinit ." may have "worked" in the sense that you would
> have at least one path in your tree and avoided this "nothing
> matches" most of the time. It would have still failed with the
> exactly same error if run in an empty repository, i.e.
>
> $ E=/var/tmp/x/empty && rm -fr "$E" && mkdir -p "$E" && cd "$E"
> $ git init
> $ rungit v2.6.6 submodule deinit .
> error: pathspec '.' did not match any file(s) known to git.
> Did you forget to 'git add'?
> $ >file && git add file
> $ rungit v2.6.6 submodule deinit .
> $ echo $?
> 0
So instead of a pathspec add the '--all' option to deinit all submodules
and add a test to check for the corner case of an empty repository.
The code only needs to learn about the '--all' option and doesn't
require further changes as `git submodule--helper list "$@"` will list
all submodules when "$@" is empty.
[1] http://news.gmane.org/gmane.comp.version-control.git/289535
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is no .gitmodules file availabe to initialize a submodule
from, `submodule_from_path` just returns NULL. We need to check for
that and abort gracefully.
When `git submodule update` was implemented in shell, this error out
with the warning
Submodule path '%s' not initialized
Maybe you want to use 'update --init'?
Replicate that behavior for now instead of crashing.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is no .gitmodules file availabe to initialize a submodule
from, `submodule_from_path` just returns NULL. We need to check for
that and abort gracefully. When `submodule init` was implemented in shell,
a missing .gitmodules file would result in an error message
No url found for submodule path '%s' in .gitmodules
Replicate that error message for now.
When the .gitmodules file is missing we can probably fail even earlier
for all of the submodules with an improved error message.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
|
|
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
Any further comments? Otherwise will merge to 'next'.
* sb/submodule-path-misc-bugs: (600 commits)
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Git 2.8
Documentation: fix git-p4 AsciiDoc formatting
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
submodule: fix regression for deinit without submodules
l10n: pt_PT: Update and add new translations
l10n: ca.po: update translation
Git 2.8-rc4
Documentation: fix broken linkgit to git-config
Documentation: use ASCII quotation marks in git-p4
Revert "config.mak.uname: use clang for Mac OS X 10.6"
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
...
|
|
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
|
|
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
|
|
When giving relative paths to `relative_path` to compute a relative path
from one directory to another, this may fail in `relative_path`.
Make sure both arguments to `relative_path` are always absolute.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update --init --recursive" uses full path to refer to
the true location of the repository in the "gitdir:" pointer for
nested submodules; the command used to use relative paths.
This was reported by Norio Nomura in $gmane/290280.
The root cause for that bug is in using recursive submodules as
their relative path handling was broken in ee8838d (2015-09-08,
submodule: rewrite `module_clone` shell function in C).
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Per Cederqvist wrote:
> It used to be possible to run
>
> git submodule deinit -f .
>
> to remove any submodules, no matter how many submodules you had. That
> is no longer possible in projects that don't have any submodules at
> all. The command will fail with:
>
> error: pathspec '.' did not match any file(s) known to git.
This regression was introduced in 74703a1e4dfc (submodule: rewrite
`module_list` shell function in C, 2015-09-02), as we changed the
order of checking in new module listing to first check whether it is
a gitlin before feeding it to match_pathspec(). It used to be that
a pathspec that does not match any path were diagnosed as an error,
but the new code complains for a pathspec that does not match any
submodule path.
Arguably the new behaviour may give us a better diagnosis, but that
is inconsistent with the suggestion "deinit" gives, and also this
was an unintended accident. The new behaviour hopefully can be
redesigned and implemented better in future releases, but for now,
switch these two checks to restore the same behavior as before. In
an empty repository, giving the pathspec '.' will still get the same
"did not match" error, but that is the same bug we had before 1.7.0.
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reroute the error message for specified but initialized submodules
to stderr instead of stdout.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a regression introduced by 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02).
Add a test to ensure we list the right submodule when giving a
specific pathspec.
Reported-By: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule add" failed to squash "path/to/././submodule" to
"path/to/submodule".
* ps/submodule-sanitize-path-upon-add:
git-submodule.sh: fix '/././' path normalization
|
|
When we add a new submodule the path of the submodule is being
normalized. We fail to normalize multiple adjacent '/./', though.
Thus 'path/to/././submodule' will become 'path/to/./submodule' where
it should be 'path/to/submodule' instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doing:
GIT_CONFIG=foo git config ...
is equivalent to:
git config --file=foo ...
The latter is easier to read and slightly less error-prone,
because of issues with one-shot variables and shell
functions (e.g., you cannot use the former with
test_must_fail).
Note that we explicitly leave one case in t1300 which checks
the same operation on both GIT_CONFIG and "git config
--file". They are equivalent in the code these days, but
this will make sure it remains so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Nieder
Junio C Hamano
SZEDER Gábor
Nguyễn Thái Ngọc Duy
Eric Sunshine
Stefan Beller
Casey Fitzpatrick
René Scharfe
Brandon Williams
Ramsay Jones
Jeff King
Vasco Almeida
Patrick Steinhardt