| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The standard `die()` function that is used in C code prefixes all the
messages passed to it with 'fatal: '. This does not happen with the
`die` used in 'git-submodule.sh'.
Let's prefix each of the shell die messages with 'fatal: ' so that when
they are converted to C code, the error messages stay the same as before
the conversion.
Note that the shell version of `die` exits with error code 1, while the
C version exits with error code 128. In practice, this does not change
any behaviour, as no functionality in 'submodule add' and 'submodule
update' relies on the value of the exit code.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to ensure failure on adding a submodule to a directory with
tracked contents in the index.
As we are going to refactor and port to C some parts of `git submodule
add`, let's add a test to help ensure no regression is introduced.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[0-4]*.sh &&
git checkout HEAD -- t7064\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using cut with hard-coded hash sizes, use cut with fields, or
where that's not possible, sed with $OID_REGEX, so that the tests are
independent of hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
Also fix the space after redirection operator in t3701 while we're here.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t' t/`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git submodule status" reports an initialized but not yet
populated submodule has not been reimplemented correctly when a
part of the "git submodule" command was rewritten in C, which has
been corrected.
* pk/status-of-uncloned-submodule:
t7400: testcase for submodule status on unregistered inner git repos
submodule: fix status of initialized but not cloned submodules
t7400: add a testcase for submodule status on empty dirs
|
|
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
|
|
We have test coverage for "git submodule status" output in
various cases, i.e.
1) not-init, not-cloned: status should initially be "missing"
2) init, not-cloned: status should be "missing"
3) not-init, cloned: status should ignore the inner git-repo
4) init, cloned: status should be "up-to-date" after update
4.1) + modified: status should be "modified" after submodule commit
4.2) + modified, committed: status should be "up-to-date" after update
the case 3) is not covered yet.
Test that submodule status reports an inner git repo as unknown, while
it is not added to the superproject. This covers case (3).
Signed-off-by: Peter Kaestle <peter@piie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Original bash helper for "submodule status" was doing a check for
initialized but not cloned submodules and prefixed the status with
a minus sign in case no .git file or folder was found inside the
submodule directory.
This check was missed when the original port of the functionality
from bash to C was done.
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have test coverage for "git submodule status" output in
various cases, i.e.
1) not-init, not-cloned: status should initially be "missing"
2) init, not-cloned: status should be "missing"
3) not-init, cloned:
4) init, cloned: status should be "up-to-date" after update
4.1) + modified: status should be "modified" after submodule commit
4.2) + modified, committed: status should be "up-to-date" after update
but the cases 2) and 3) are not covered.
Test that submodule status reports initialized but not cloned
submodules as missing to fill the gap in test coverage; this covers
case (2) above, but case (3) remains uncovered.
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless --force is specified, 'submodule add' checks if the destination
path is ignored by calling 'git add --dry-run --ignore-missing', and,
if that call fails, aborts with a custom "path is ignored" message (a
slight variant of what 'git add' shows). Aborting early rather than
letting the downstream 'git add' call fail is done so that the command
exits before cloning into the destination path. However, in rare
cases where the dry-run call fails for a reason other than the path
being ignored---for example, due to a preexisting index.lock
file---displaying the "ignored path" error message hides the real
source of the failure.
Instead of displaying the tailored "ignored path" message, let's
report the standard error from the dry run to give the caller more
accurate information about failures that are not due to an ignored
path.
For the ignored path case, this leads to the following change in the
error message:
The following [-path is-]{+paths are+} ignored by one of your .gitignore files:
<destination path>
Use -f if you really want to add [-it.-]{+them.+}
The new phrasing is a bit awkward, because 'submodule add' is only
dealing with one destination path. Alternatively, we could continue
to use the tailored message when the exit code is 1 (the expected
status for a failure due to an ignored path) and relay the standard
error for all other non-zero exits. That, however, risks hiding the
message of unrelated failures that share an exit code of 1, so it
doesn't seem worth doing just to avoid a clunkier, but still clear,
error message.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule status" that is run from a subdirectory of the
superproject did not work well, which has been corrected.
* mg/submodule-status-from-a-subdirectory:
submodule: fix 'submodule status' when called from a subdirectory
|
|
When calling `git submodule status` while in a subdirectory, we are
incorrectly not detecting modified submodules and
thus reporting that all of the submodules are unchanged.
This is because the submodule helper is calling `diff-index` with the
submodule path assuming the path is relative to the current prefix
directory, however the submodule path used is actually relative to the root.
Always pass NULL as the `prefix` when running diff-files on the
submodule, to make sure the submodule's path is interpreted as relative
to the superproject's repository root.
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests print a file before searching for a pattern using
test_i18ngrep. This is useful when debugging tests with --verbose when
the pattern is not found as expected.
Since 63b1a175ee (t: make 'test_i18ngrep' more informative on failure,
2018-02-08) test_i18ngrep already shows the contents of a file that
doesn't match the expected pattern, though.
So don't bother doing the same unconditionally up-front. The contents
are not interesting if the expected pattern is found, and showing it
twice if it doesn't match is of no use.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the path given to 'git submodule add' is an existing repository
that is not in the index, the repository is passed to 'git add'. If
this repository doesn't have a commit checked out, we don't get a
useful result: there is no subproject OID to track, and any untracked
files in the sub-repository are added as blobs in the top-level
repository.
To avoid getting into this state, abort if the path is a repository
that doesn't have a commit checked out. Note that this check must
come before the 'git add --dry-run' check because the next commit will
make 'git add' fail when given a repository that doesn't have a commit
checked out.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it. As we covered the only other case in
which a submodule loses its working tree in the earlier step
(i.e. switching branches of top-level project to move to a commit that did
not have the submodule), this makes the code always maintain
core.worktree correctly unset when there is no working tree
for a submodule.
This re-introduces 984cd77ddb (submodule deinit: unset core.worktree,
2018-06-18), which was reverted as part of f178c13fda (Revert "Merge
branch 'sb/submodule-core-worktree'", 2018-09-07)
The whole series was reverted as the offending commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18)
was relied on by other commits such as 984cd77ddb.
Keep the offending commit reverted, but its functionality came back via
4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17), such
that we can reintroduce 984cd77ddb now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule helper update_clone called by "git submodule update",
clones submodules if needed. As submodules used to have the URL indicating
if they were active, the step to resolve relative URLs was done in the
"submodule init" step. Nowadays submodules can be configured active without
calling an explicit init, e.g. via configuring submodule.active.
When trying to obtain submodules that are set active this way, we'll
fallback to the URL found in the .gitmodules, which may be relative to the
superproject, but we do not resolve it, yet:
git clone https://gerrit.googlesource.com/gerrit
cd gerrit && grep url .gitmodules
url = ../plugins/codemirror-editor
...
git config submodule.active .
git submodule update
fatal: repository '../plugins/codemirror-editor' does not exist
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor'. Retry scheduled
[...]
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor' a second time, aborting
[...]
To resolve the issue, factor out the function that resolves the relative
URLs in "git submodule init" (in the submodule helper in the init_submodule
function) and call it at the appropriate place in the update_clone helper.
Reported-by: Jaewoong Jung <jungjw@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Test clean-up and corrections.
* es/test-fixes: (26 commits)
t5608: fix broken &&-chain
t9119: fix broken &&-chains
t9000-t9999: fix broken &&-chains
t7000-t7999: fix broken &&-chains
t6000-t6999: fix broken &&-chains
t5000-t5999: fix broken &&-chains
t4000-t4999: fix broken &&-chains
t3030: fix broken &&-chains
t3000-t3999: fix broken &&-chains
t2000-t2999: fix broken &&-chains
t1000-t1999: fix broken &&-chains
t0000-t0999: fix broken &&-chains
t9814: simplify convoluted check that command correctly errors out
t9001: fix broken "invoke hook" test
t7810: use test_expect_code() instead of hand-rolled comparison
t7400: fix broken "submodule add/reconfigure --force" test
t7201: drop pointless "exit 0" at end of subshell
t6036: fix broken "merge fails but has appropriate contents" tests
t5505: modernize and simplify hard-to-digest test
t5406: use write_script() instead of birthing shell script manually
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test has been dysfunctional since it was added by 619acfc78c
(submodule add: extend force flag to add existing repos, 2016-10-06),
however, two problems early in the test went unnoticed due to a broken
&&-chain later in the test.
First, it tries configuring the submodule with repository "bogus-url",
however, "git submodule add" insists that the repository be either an
absolute URL or a relative pathname requiring prefix "./" or "../" (this
is true even with --force), but "bogus-url" does not meet those
criteria, thus the command fails.
Second, it then tries configuring a submodule with a path which is
.gitignore'd, which is disallowed. This restriction can be overridden
with --force, but the test neglects to use that option.
Fix both problems, as well as the broken &&-chain behind which they hid.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cf/submodule-progress-dissociate:
t7400: encapsulate setup code in test_expect_success
|
|
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
|
|
The '--progress' was introduced in 72c5f88311d (clone: pass --progress
decision to recursive submodules, 2016-09-22) to fix the progress reporting
of the clone command. Also add the progress option to the 'submodule add'
command. The update command already supports the progress flag, but it
is not documented.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we can't find a ref store for a submodule then assume the latter
is not initialized (or was removed). Print a status line accordingly
instead of causing a segmentation fault by passing NULL as the first
parameter of refs_head_ref().
Reported-by: Jeremy Feusi <jeremy@feusi.co>
Reviewed-by: Stefan Beller <sbeller@google.com>
Initial-Test-By: Stefan Beller <sbeller@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
|
|
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check for configuration parsing errors in '.gitmodules' in t7411, which
is explicitly testing the submodule-config subsystem, instead of in
t7400. Also explicitly use the test helper instead of relying on the
gitmodules file from being read in status.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A hotfix to a topic that is already in v2.13.
* bw/submodule-with-bs-path:
t7400: add !CYGWIN prerequisite to 'add with \\ in path'
|
|
A hotfix to a topic that is already in v2.13.
* bw/submodule-with-bs-path:
t7400: add !CYGWIN prerequisite to 'add with \\ in path'
|
|
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
|
|
Commit cf9e55f494 ("submodule: prevent backslash expantion in submodule
names", 07-04-2017) added a test which creates a git repository with
some backslash characters in the name. On windows, where the backslash
character is a directory separator, it is not possible to create a
repository with the name 'sub\with\backslash'. (The NTFS filesystem would
probably allow it, but the win32 api does not). The MinGW and Git for
Windows versions of git actually create a repository called 'backslash'
in the sub-directory 'sub/with'.
On cygwin, however, due to the slightly schizophrenic treatment of the
backslash character by cygwin-git, this test fails at the 'git init'
stage. The git-init command does not recognise the directory separators
in the input path (eg. is_dir_sep('\\') is false), so it does not
attempt to create the leading directories 'sub/with'. (The call to
mkdir('sub\\with\\backslash') actually does recognise the directory
separators, but fails because the 'sub/with' directory doesn't exist).
In order to suppress the test failure (for now), add the !CYGWIN test
prerequisite.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When attempting to add a submodule with backslashes in its name 'git
submodule' fails in a funny way. We can see that some of the
backslashes are expanded resulting in a bogus path:
git -C main submodule add ../sub\\with\\backslash
fatal: repository '/tmp/test/sub\witackslash' does not exist
fatal: clone of '/tmp/test/sub\witackslash' into submodule path
To solve this, convert calls to 'read' to 'read -r' in git-submodule.sh
in order to prevent backslash expantion in submodule names.
Reported-by: Joachim Durchholz <jo@durchholz.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the force flag in `git submodule add` takes care of possibly
ignored files or when a name collision occurs.
However there is another situation where submodule add comes in handy:
When you already have a gitlink recorded, but no configuration was
done (i.e. no .gitmodules file nor any entry in .git/config) and you
want to generate these config entries. For this situation allow
`git submodule add` to proceed if there is already a submodule at the
given path in the index.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
|
Atharva Raykar
Ævar Arnfjörð Bjarmason
Johannes Schindelin
brian m. carlson
Andrei Rybak
Junio C Hamano
Peter Kaestle
Peter Kaestle
Kyle Meyer
Manish Goregaokar
René Scharfe
Stefan Beller
Jonathan Nieder
SZEDER Gábor
Nguyễn Thái Ngọc Duy
Eric Sunshine
Casey Fitzpatrick
Brandon Williams
Ramsay Jones
Jeff King
Vasco Almeida