| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark string with advice seen by the user when in detached head.
Update test t7201-co.sh to pass under GETTEXT_POISON build. Pretend
success if the number of lines of "git checkout renamer^" output is not
greater than 1 and test are running under GETTEXT_POISON.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of these breakages is in setup, but one is more severe
and may miss a real test failure. These are pulled out from
the rest, though, because we also clean up a few other
anachronisms. The most interesting is the use of this
here-doc construct:
(cat >... <<EOF
...
EOF
) &&
It looks like an attempt to make the &&-chaining more
natural by letting it come at the end of the here-doc. But
the extra sub-shell is so non-idiomatic (plus the lack of
"<<-") that it ends up confusing.
Since these are just using a single line, we can accomplish
the same thing with a single printf (which also makes the
use of tab more obvious than the verbatim whitespace).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
twoway_merge() is missing an o->gently check in the case where a file
that needs to be modified is missing from the index but present in the
old and new trees. As a result, in this case 'git checkout -m' errors
out instead of trying to perform a merge.
Fix it by checking o->gently. While at it, inline the o->gently check
into reject_merge to prevent future call sites from making the same
mistake.
Noticed by code inspection. The test for the motivating case was
added by JC.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
Without this patch, this test would start failing when the new behavior is
introduced.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some test were mistakenly disabled under GETTEXT_POISON as well,
and they have been resurrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/i18n-st: (69 commits)
i18n: git-shortlog basic messages
i18n: git-revert split up "could not revert/apply" message
i18n: git-revert literal "me" messages
i18n: git-revert "Your local changes" message
i18n: git-revert basic messages
i18n: git-notes GIT_NOTES_REWRITE_MODE error message
i18n: git-notes basic commands
i18n: git-gc "Auto packing the repository" message
i18n: git-gc basic messages
i18n: git-describe basic messages
i18n: git-clean clean.requireForce messages
i18n: git-clean basic messages
i18n: git-bundle basic messages
i18n: git-archive basic messages
i18n: git-status "renamed: " message
i18n: git-status "Initial commit" message
i18n: git-status "Changes to be committed" message
i18n: git-status shortstatus messages
i18n: git-status "nothing to commit" messages
i18n: git-status basic messages
...
Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh
|
|
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a new branch using the --track option, we must make sure that
we don't try to set an upstream that does not make sense to follow (using
'git pull') or update (using 'git push'). The current code checks against
using HEAD as upstream (since tracking a symref doesn't make sense). However,
tracking a tag doesn't make sense either. Indeed, tracking _any_ ref that is
not a (local or remote) branch doesn't make sense, and should be disallowed.
This patch achieves this by checking that the ref we're trying to --track
resides within refs/heads/* or refs/remotes/*. This new check replaces the
previous check against HEAD.
A couple of testcases are also added, verifying that we cannot create
branches with tags as upstreams.
Finally, some selftests relying on using a non-branch as an upstream have
been reworked or removed:
- t6040: Reverse the meaning of two tests that depend on the ability to
use (lightweight and annotated) tags as upstreams. These two tests were
originally added in commits 1be570f and 57ffc5f, and this patch reverts the
intention of those two commits.
- t7201: Remove part of a test (introduced in 9188ed8) relying on a
non-branch as upstream.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git checkout --merge --conflict=diff3 can be used to present conflict
hunks including text from the common ancestor. The added information
is helpful for resolving a merge by hand, and merge tools tend to
understand it because it is very similar to what ‘diff3 -m’ produces.
Unlike current git, diff3 -m includes a label for the merge base on
the ||||||| line, and unfortunately, some tools cannot parse the
conflict hunks without it. Humans can benefit from a cue when
learning to interpreting the format, too. Mark the start of the text
from the old branch with a label based on the branch’s name.
git rerere does not have trouble parsing this output and its preimage
ids are unchanged since it includes its own code for recreating
conflict hunks. No other code in git tries to parse conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git checkout --conflict=diff3 can be used to present conflicts hunks
including text from the common ancestor:
<<<<<<< ours
ourside
|||||||
original
=======
theirside
>>>>>>> theirs
The added information is helpful for resolving a merge by hand, and
merge tools can usually understand it without trouble because it looks
like output from ‘diff3 -m’.
diff3 includes a label for the merge base on the ||||||| line, and it
seems some tools (for example, Emacs 22’s smerge-mode) cannot parse
conflict hunks without such a label. Humans could use help in
interpreting the output, too. So change the marker for the start of the
text from the common ancestor to include the label “base”.
git rerere’s conflict identifiers are not affected: to parse conflict
hunks, rerere looks for whitespace after the ||||||| marker rather
than a newline, and to compute preimage ids, rerere has its own code
for creating conflict hunks. No other code in git tries to parse
conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to change the format of the conflict hunks that ‘checkout
--merge’ writes. Add tests checking the current behavior first.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so. Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).
Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.
Allow the long description to be hidden by setting advice.detachedHead
configuration to false.
We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-1.6.1-checkout-m-custom-merge:
checkout -m path: fix recreating conflicts
Conflicts:
t/t7201-co.sh
|
|
We should tell ll_merge() that the 3-way merge between stages #2 and #3 is
an outermost merge, not a virtual-ancestor creation.
Back when this code was originally written, users couldn't write custom
merge drivers easily, so the bug didn't matter, but these days it does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the time when we give branch name in the message, we quote it
inside a pair of single-quotes. git-checkout uses double-quotes; this
patch corrects the inconsistency.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
Conflicts:
builtin-commit.c
|
|
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
|
|
* db/maint-checkout-b:
Check early that a new branch is new and valid
|
|
If you fail to update refs to change branches in checkout, your index
and working tree are left already updated. We don't have an easy way
to undo this, but at least we can check things that would make the
creation of a new branch fail. These checks were in the shell version,
and were lost in the C conversion.
The messages are from the shell version, and should probably be made nicer.
[jc: added test to t7201]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
|
|
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
Conflicts:
t/t7201-co.sh
|
|
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
|
|
Converts tests between t7201-t9001.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new option does essentially the same thing as -m option when checking
unmerged paths out of the index, but it uses the specified style instead
of configured merge.conflictstyle.
Setting "merge.conflictstyle" to "diff3" is usually less useful than using
the default "merge" style, because the latter allows a conflict that
results by both sides changing the same region in a very similar way to
get simplified substancially by reducing the common lines. However, when
one side removed a group of lines (perhaps a function was moved to some
other file) while the other side modified it, the default "merge" style
does not give any clue as to why the hunk is left conflicting. You would
need the original to understand what is going on.
The recommended use would be not to set merge.conflictstyle variable so
that you would usually use the default "merge" style conflict, and when
the result in a path in a particular merge is too hard to understand, use
"git checkout --conflict=diff3 $path" to check it out with the original to
review what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches git-checkout to recreate a merge out of unmerged
index entries while resolving conflicts.
With this patch, checking out an unmerged path from the index
now have the following possibilities:
* Without any option, an attempt to checkout an unmerged path
will atomically fail (i.e. no other cleanly-merged paths are
checked out either);
* With "-f", other cleanly-merged paths are checked out, and
unmerged paths are ignored;
* With "--ours" or "--theirs, the contents from the specified
stage is checked out;
* With "-m" (we should add "--merge" as synonym), the 3-way merge
is recreated from the staged object names and checked out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets you to check out 'our' (or 'their') version of an
unmerged path out of the index while resolving conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier we made "git checkout $pathspec" to atomically refuse
the operation of $pathspec matched any path with unmerged
stages. This patch allows:
$ git checkout -f a b c
to ignore, instead of error out on, such unmerged paths. The
fix to prevent checkout of an unmerged path from random stages
is still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a conflicted merge when you have unmerged stages for a
path F in the index, if you said:
$ git checkout F
we rewrote F as many times as we have stages for it, and the
last one (typically "theirs") was left in the work tree, without
resolving the conflict.
This fixes it by noticing that a specified pathspec pattern
matches an unmerged path, and by erroring out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code handles additionally "refs/remotes/<something>/name",
"remotes/<something>/name", and "refs/<namespace>/name".
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
What does the user most likely want with this command?
$ git checkout --track origin/next
Exactly. A branch called 'next', that tracks origin's branch 'next'.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/branch-track:
doc: documentation update for the branch track changes
branch: optionally setup branch.*.merge from upstream local branches
Conflicts:
Documentation/config.txt
Documentation/git-branch.txt
Documentation/git-checkout.txt
builtin-branch.c
cache.h
t/t7201-co.sh
|
|
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
|
|
When switching branches from a subdirectory, checkout rewritten
in C extracted the toplevel of the tree in there.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" and "git checkout -b" now honor --track option even when
the upstream branch is local. Previously --track was silently ignored
when forking from a local branch. Also the command did not error out
when --track was explicitly asked for but the forked point specified
was not an existing branch (i.e. when there is no way to set up the
tracking configuration), but now it correctly does.
The configuration setting branch.autosetupmerge can now be set to
"always", which is equivalent to using --track from the command line.
Setting branch.autosetupmerge to "true" will retain the former behavior
of only setting up branch.*.merge for remote upstream branches.
Includes test cases for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the test failed, it was giving really unclear ed script
output. Instead, give a diff that sort of suggests the problem. Also
replaces the use of "git diff" for this purpose with "diff -u".
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have local changes that don't conflict with the
branch-switching changes, these should be kept, not cause errors even
without -m, and be reported afterwards in name-status format.
With -m, the changes carried across should be listed as well. And, for
now, include the merge-recursive output from this process.
Also test the detatched head message in at least one case.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although it is not advisable, we have always allowed a branch
and a tag to have the same basename (i.e. it is not illegal to
have refs/heads/frotz and refs/tags/frotz at the same time).
When talking about a specific commit, the interpretation of
'frotz' has always been "use tag and then check branch",
although we warn when ambiguities exist.
However "git checkout $name" is defined to (1) first see if it
matches the branch name, and if so switch to that branch; (2)
otherwise it is an instruction to detach HEAD to point at the
commit named by $name. We did not follow this definition when
$name appeared under both refs/heads/ and refs/tags/ -- we
switched to the branch but read the tree from the tagged commit,
which was utterly bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You cannot currently checkout the tip of an existing branch
without moving to the branch.
This allows you to detach your HEAD and place it at such a
commit, with:
$ git checkout master^0
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Stefan Beller
Vasco Almeida
Jeff King
Jonathan Nieder
Johan Herland
Stefano Lattarini
Junio C Hamano
Ævar Arnfjörð Bjarmason
Nanako Shiraishi
Jari Aalto
Shawn O. Pearce
Daniel Barkalow
Alex Riesen
Johannes Schindelin
Brandon Casey
Jay Soffian
Junio C Hamano