summaryrefslogtreecommitdiff
path: root/t/t7201-co.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-10-22t7201: put each command on a separate lineLibravatar Charvi Mendiratta1-8/+18
Modern practice is to avoid multiple commands per line, and instead place each command on its own line. Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-22t7201: use 'git -C' to avoid subshellLibravatar Charvi Mendiratta1-8/+2
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-22t7102,t7201: remove whitespace after redirect operatorLibravatar Charvi Mendiratta1-5/+5
According to Documentation/CodingGuidelines, redirect operator is written with space before, but no space after them. Let's remove these whitespaces after redirect operators. Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-20t7102,t7201: remove unnecessary blank spaces in test bodyLibravatar Charvi Mendiratta1-25/+0
t7102 and t7201 still follow the old style of having blank lines around test body, which is not consistence with our current practice. Let's remove those unnecessary blank lines. Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-20t7101,t7102,t7201: modernize test formattingLibravatar Charvi Mendiratta1-16/+15
Some tests in these scripts are formatted using a very old style: test_expect_success \ 'title' \ 'body line 1 && body line 2' Updating the formatting to the modern style: test_expect_success 'title' ' body line 1 && body line 2 ' Signed-off-by: Charvi Mendiratta <charvi077@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-30t7201: abstract away SHA-1-specific constantsLibravatar brian m. carlson1-2/+4
Adjust the test so that it computes variables for object IDs instead of using hard-coded hashes. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-21tests: make GIT_TEST_GETTEXT_POISON a booleanLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Change the GIT_TEST_GETTEXT_POISON variable from being "non-empty?" to being a more standard boolean variable. Since it needed to be checked in both C code and shellscript (via test -n) it was one of the remaining shellscript-like variables. Now that we have "env--helper" we can change that. There's a couple of tricky edge cases that arise because we're using git_env_bool() early, and the config-reading "env--helper". If GIT_TEST_GETTEXT_POISON is set to an invalid value die_bad_number() will die, but to do so it would usually call gettext(). Let's detect the special case of GIT_TEST_GETTEXT_POISON and always emit that message in the C locale, lest we infinitely loop. As seen in the updated tests in t0017-env-helper.sh there's also a caveat related to "env--helper" needing to read the config for trace2 purposes. Since the C_LOCALE_OUTPUT prerequisite is lazy and relies on "env--helper" we could get invalid results if we failed to read the config (e.g. because we'd loop on includes) when combined with e.g. "test_i18ngrep" wanting to check with "env--helper" if GIT_TEST_GETTEXT_POISON was true or not. I'm crossing my fingers and hoping that a test similar to the one I removed in the earlier "config tests: simplify include cycle test" change in this series won't happen again, and testing for this explicitly in "env--helper"'s own tests. This change breaks existing uses of e.g. GIT_TEST_GETTEXT_POISON=YesPlease, which we've documented in po/README and other places. As noted in [1] we might want to consider also accepting "YesPlease" in "env--helper" as a special-case. But as the lack of uproar over 6cdccfce1e ("i18n: make GETTEXT_POISON a runtime option", 2018-11-08) demonstrates the audience for this option is a really narrow set of git developers, who shouldn't have much trouble modifying their test scripts, so I think it's better to deal with that minor headache now and make all the relevant GIT_TEST_* variables boolean in the same way than carry the "YesPlease" special-case forward. 1. https://public-inbox.org/git/xmqqtvckm3h8.fsf@gitster-ct.c.googlers.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-24checkout: prevent losing staged changes with --mergeLibravatar Nguyễn Thái Ngọc Duy1-9/+1
When --merge is specified, we may need to do a real merge (instead of three-way tree unpacking), the steps are best seen in git-checkout.sh version before it's removed: # Match the index to the working tree, and do a three-way. git diff-files --name-only | git update-index --remove --stdin && work=`git write-tree` && git read-tree $v --reset -u $new || exit git merge-recursive $old -- $new $work # Do not register the cleanly merged paths in the index yet. # this is not a real merge before committing, but just carrying # the working tree changes along. unmerged=`git ls-files -u` git read-tree $v --reset $new case "$unmerged" in '') ;; *) ( z40=0000000000000000000000000000000000000000 echo "$unmerged" | sed -e 's/^[0-7]* [0-9a-f]* /'"0 $z40 /" echo "$unmerged" ) | git update-index --index-info ;; esac Notice the last 'read-tree --reset' step. We restore worktree back to 'new' tree after worktree's messed up by merge-recursive. If there are staged changes before this whole command sequence is executed, they are lost because they are unlikely part of the 'new' tree to be restored. There is no easy way to fix this. Elijah may have something up his sleeves [1], but until then, check if there are staged changes and refuse to run and lose them. The user would need to do "git reset" to continue in this case. A note about the test update. 'checkout -m' in that test will fail because a deletion is staged. This 'checkout -m' was previously needed to verify quietness behavior of unpack-trees. But a different check has been put in place in the last patch. We can safely drop 'checkout -m' now. [1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-24read-tree: add --quietLibravatar Nguyễn Thái Ngọc Duy1-0/+3
read-tree is basically the front end of unpack-trees code and shoud expose all of its functionality (unless it's designed for internal use). This "opts.quiet" (formerly "opts.gently") was added for builtin/checkout.c but there is no reason why other read-tree users won't find this useful. The test that is updated to run 'read-tree --quiet' was added because unpack-trees was accidentally not being quiet [1] in 6a143aa2b2 (checkout -m: attempt merge when deletion of path was staged - 2014-08-12). Because checkout is the only "opts.quiet" user, there was no other way to test quiet behavior. But we can now test it directly. 6a143aa2b2 was manually reverted to verify that read-tree --quiet works correctly (i.e. test_must_be_empty fails). [1] the commit message there say "errors out instead of performing a merge" but I'm pretty sure the "performing a merge" happens anyway even before that commit. That line should say "errors out _in addition to_ performing a merge" Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-09i18n: make GETTEXT_POISON a runtime optionLibravatar Ævar Arnfjörð Bjarmason1-3/+3
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?> runtime parameter, to be consistent with other parameters documented in "Running tests with special setups" in t/README. When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly translator", 2011-02-22) I was concerned with ensuring that the _() function would get constant folded if NO_GETTEXT was defined, and likewise that GETTEXT_POISON would be compiled out unless it was defined. But as the benchmark in my [1] shows doing a one-off runtime getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was originally added the GIT_TEST_* env variables have become the common idiom for turning on special test setups. So change GETTEXT_POISON to work the same way. Now the GETTEXT_POISON=YesPlease compile-time option is gone, and running the tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off without recompiling. This allows for conditionally amending tests to test with/without poison, similar to what 859fdc0c3c ("commit-graph: define GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do some of that, now we e.g. always run the t0205-gettext-poison.sh test. I did enough there to remove the GETTEXT_POISON prerequisite, but its inverse C_LOCALE_OUTPUT is still around, and surely some tests using it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=. Notes on the implementation: * We still compile a dedicated GETTEXT_POISON build in Travis CI. Perhaps this should be revisited and integrated into the "linux-gcc" build, see ae59a4e44f ("travis: run tests with GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then again maybe not, see [2]. * We now skip a test in t0000-basic.sh under GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This test relies on C locale output, but due to an edge case in how the previous implementation of GETTEXT_POISON worked (reading it from GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does, and needs to be skipped. * The getenv() function is not reentrant, so out of paranoia about code of the form: printf(_("%s"), getenv("some-env")); call use_gettext_poison() in our early setup in git_setup_gettext() so we populate the "poison_requested" variable in a codepath that's won't suffer from that race condition. * We error out in the Makefile if you're still saying GETTEXT_POISON=YesPlease to prompt users to change their invocation. * We should not print out poisoned messages during the test initialization itself to keep it more readable, so the test library hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during setup. See [3]. See also [4] for more on the motivation behind this patch, and the history of the GETTEXT_POISON facility. 1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/ 2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/ 3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/ 4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-07t/*: fix ordering of expected/observed argumentsLibravatar Matthew DeVore1-2/+2
Fix various places where the ordering was obviously wrong, meaning it was easy to find with grep. Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-27Merge branch 'sg/test-must-be-empty'Libravatar Junio C Hamano1-4/+3
Test fixes. * sg/test-must-be-empty: tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>' tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>' tests: use 'test_must_be_empty' instead of 'test ! -s' tests: use 'test_must_be_empty' instead of '! test -s'
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'Libravatar SZEDER Gábor1-2/+1
Using 'test_must_be_empty' is shorter and more idiomatic than >empty && test_cmp empty out as it saves the creation of an empty file. Furthermore, sometimes the expected empty file doesn't have such a descriptive name like 'empty', and its creation is far away from the place where it's finally used for comparison (e.g. in 't7600-merge.sh', where two expected empty files are created in the 'setup' test, but are used only about 500 lines later). These cases were found by instrumenting 'test_cmp' to error out the test script when it's used to compare empty files, and then converted manually. Note that even after this patch there still remain a lot of cases where we use 'test_cmp' to check empty files: - Sometimes the expected output is not hard-coded in the test, but 'test_cmp' is used to ensure that two similar git commands produce the same output, and that output happens to be empty, e.g. the test 'submodule update --merge - ignores --merge for new submodules' in 't7406-submodule-update.sh'. - Repetitive common tasks, including preparing the expected results and running 'test_cmp', are often extracted into a helper function, and some of this helper's callsites expect no output. - For the same reason as above, the whole 'test_expect_success' block is within a helper function, e.g. in 't3070-wildmatch.sh'. - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update (-p)' in 't9400-git-cvsserver-server.sh'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21tests: use 'test_must_be_empty' instead of '! test -s'Libravatar SZEDER Gábor1-2/+2
Using 'test_must_be_empty' is preferable to '! test -s', because it gives a helpful error message if the given file is unexpectedly not empty, while the latter remains completely silent. Furthermore, it also catches cases when the given file unexpectedly does not exist at all. This patch was basically created by: sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh with the following notable exceptions: - The '! test -s' check in '.gitmodules ignore=dirty suppresses submodules with untracked content' in 't7508-status.sh' is left as-is, because it's bogus and, therefore, it's subject of a dedicated patch. - The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and 't9135-git-svn-moved-branch-empty-file.sh' are immediately preceeded by a 'test -f' to ensure that the files exist in the first place. 'test_must_be_empty' ensures that as well, so those 'test -f' commands are removed as well. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16t7000-t7999: fix broken &&-chainsLibravatar Eric Sunshine1-20/+20
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03t7201: drop pointless "exit 0" at end of subshellLibravatar Eric Sunshine1-1/+0
This test employs a for-loop inside a subshell and correctly aborts the loop and fails the test overall (via "exit 1") if any iteration of the for-loop fails. Otherwise, it exits the subshell with an explicit but entirely unnecessary "exit 0", presumably to indicate that all iterations of the loop succeeded. The &&-chain is broken between the for-loop and the "exit 0". Rather than fixing the &&-chain, just drop the pointless "exit 0". Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-23t: make many tests depend less on the refs being filesLibravatar David Turner1-1/+1
Many tests are very focused on the file system representation of the loose and packed refs code. As there are plans to implement other ref storage systems, let's migrate these tests to a form that test the intent of the refs storage system instead of it internals. This will make clear to readers that these tests do not depend on which ref backend is used. The internals of the loose refs backend are still tested in t1400-update-ref.sh, whereas the tests changed in this patch focus on testing other aspects. This patch just takes care of many low hanging fruits. It does not try to completely solves the issue. Helped-by: Stefan Beller <sbeller@google.com> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-07tests: fix diff order arguments in test_cmpLibravatar Stefan Beller1-2/+2
Fix the argument order for test_cmp. When given the expected result first the diff shows the actual output with '+' and the expectation with '-', which is the convention for our tests. Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17i18n: advice: mark string about detached head for translationLibravatar Vasco Almeida1-1/+1
Mark string with advice seen by the user when in detached head. Update test t7201-co.sh to pass under GETTEXT_POISON build. Pretend success if the number of lines of "git checkout renamer^" output is not greater than 1 and test are running under GETTEXT_POISON. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t7201: fix &&-chain breakageLibravatar Jeff King1-13/+6
One of these breakages is in setup, but one is more severe and may miss a real test failure. These are pulled out from the rest, though, because we also clean up a few other anachronisms. The most interesting is the use of this here-doc construct: (cat >... <<EOF ... EOF ) && It looks like an attempt to make the &&-chaining more natural by letting it come at the end of the here-doc. But the extra sub-shell is so non-idiomatic (plus the lack of "<<-") that it ends up confusing. Since these are just using a single line, we can accomplish the same thing with a single printf (which also makes the use of tab more obvious than the verbatim whitespace). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix &&-chaining issues around setup which might failLibravatar Jeff King1-1/+1
Many tests have an initial setup step that might fail based on whether earlier tests in the script have succeeded or not. Using a trick like "|| true" breaks the &&-chain, missing earlier failures (and fooling --chain-lint). We can use test_might_fail in some cases, which is correct and makes the intent more obvious. We can also use test_unconfig for unsetting config (and which is more robust, as well). The case in t9500 is an oddball. It wants to run cmd1 _or_ cmd2, and does it like: cmd1 || cmd2 && other_stuff It's not wrong in this case, but it's a bad habit to get into, because it breaks the &&-chain if used anywhere except at the beginning of the test (and we use the correct solution here, putting it inside a block for precedence). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-25checkout -m: attempt merge when deletion of path was stagedLibravatar Jonathan Nieder1-0/+17
twoway_merge() is missing an o->gently check in the case where a file that needs to be modified is missing from the index but present in the old and new trees. As a result, in this case 'git checkout -m' errors out instead of trying to perform a merge. Fix it by checking o->gently. While at it, inline the o->gently check into reject_merge to prevent future call sites from making the same mistake. Noticed by code inspection. The test for the motivating case was added by JC. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21t7201.24: Add refspec to keep --track workingLibravatar Johan Herland1-0/+1
We are formalizing a requirement that any remote-tracking branch to be used as an upstream (i.e. as an argument to --track), _must_ "belong" to a configured remote by being matched by the "dst" side of a fetch refspec. Without this patch, this test would start failing when the new behavior is introduced. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-11tests: modernise style: more uses of test_line_countLibravatar Stefano Lattarini1-2/+2
Prefer: test_line_count <OP> COUNT FILE over: test $(wc -l <FILE) <OP> COUNT (or similar usages) in several tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13i18n: use test_i18ngrep in t7201Libravatar Junio C Hamano1-7/+7
Some test were mistakenly disabled under GETTEXT_POISON as well, and they have been resurrected. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-5/+5
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-09i18n: git-checkout "HEAD is now at" messageLibravatar Ævar Arnfjörð Bjarmason1-5/+5
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-16branch/checkout --track: Ensure that upstream branch is indeed a branchLibravatar Johan Herland1-7/+9
When creating a new branch using the --track option, we must make sure that we don't try to set an upstream that does not make sense to follow (using 'git pull') or update (using 'git push'). The current code checks against using HEAD as upstream (since tracking a symref doesn't make sense). However, tracking a tag doesn't make sense either. Indeed, tracking _any_ ref that is not a (local or remote) branch doesn't make sense, and should be disallowed. This patch achieves this by checking that the ref we're trying to --track resides within refs/heads/* or refs/remotes/*. This new check replaces the previous check against HEAD. A couple of testcases are also added, verifying that we cannot create branches with tags as upstreams. Finally, some selftests relying on using a non-branch as an upstream have been reworked or removed: - t6040: Reverse the meaning of two tests that depend on the ability to use (lightweight and annotated) tags as upstreams. These two tests were originally added in commits 1be570f and 57ffc5f, and this patch reverts the intention of those two commits. - t7201: Remove part of a test (introduced in 9188ed8) relying on a non-branch as upstream. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20checkout -m --conflict=diff3: add a label for ancestorLibravatar Jonathan Nieder1-1/+1
git checkout --merge --conflict=diff3 can be used to present conflict hunks including text from the common ancestor. The added information is helpful for resolving a merge by hand, and merge tools tend to understand it because it is very similar to what ‘diff3 -m’ produces. Unlike current git, diff3 -m includes a label for the merge base on the ||||||| line, and unfortunately, some tools cannot parse the conflict hunks without it. Humans can benefit from a cue when learning to interpreting the format, too. Mark the start of the text from the old branch with a label based on the branch’s name. git rerere does not have trouble parsing this output and its preimage ids are unchanged since it includes its own code for recreating conflict hunks. No other code in git tries to parse conflict hunks. Requested-by: Stefan Monnier <monnier@iro.umontreal.ca> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20checkout --conflict=diff3: add a label for ancestorLibravatar Jonathan Nieder1-2/+2
git checkout --conflict=diff3 can be used to present conflicts hunks including text from the common ancestor: <<<<<<< ours ourside ||||||| original ======= theirside >>>>>>> theirs The added information is helpful for resolving a merge by hand, and merge tools can usually understand it without trouble because it looks like output from ‘diff3 -m’. diff3 includes a label for the merge base on the ||||||| line, and it seems some tools (for example, Emacs 22’s smerge-mode) cannot parse conflict hunks without such a label. Humans could use help in interpreting the output, too. So change the marker for the start of the text from the common ancestor to include the label “base”. git rerere’s conflict identifiers are not affected: to parse conflict hunks, rerere looks for whitespace after the ||||||| marker rather than a newline, and to compute preimage ids, rerere has its own code for creating conflict hunks. No other code in git tries to parse conflict hunks. Requested-by: Stefan Monnier <monnier@iro.umontreal.ca> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20tests: document format of conflicts from checkout -mLibravatar Jonathan Nieder1-4/+61
We are about to change the format of the conflict hunks that ‘checkout --merge’ writes. Add tests checking the current behavior first. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-29Reword "detached HEAD" notificationLibravatar Junio C Hamano1-10/+22
The old "advice" message explained how to create a branch after going into a detached HEAD state but didn't make it clear why the user may want to do so. Also "moving to ... which isn't a local branch" was unclear if it is complaining, if it is describing the new state, or if it is explaining why the HEAD is detached (the true reason is the last one). Give the established phrase 'detached HEAD' first to make it easy for users to look up the concept in documentation, and briefly describe what can be done in the state (i.e. play around without having to clean up) before telling the user how to keep what was done during the temporary state. Allow the long description to be hidden by setting advice.detachedHead configuration to false. We might want to customize the advice depending on how the commit to check out was spelled (e.g. instead of "new-branch-name", we way want to say "topic" when "git checkout origin/topic" triggered this message) in later updates, but this encapsulates that into a separate function and it should be a good first step. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-17Merge branch 'jc/maint-1.6.1-checkout-m-custom-merge'Libravatar Junio C Hamano1-0/+57
* jc/maint-1.6.1-checkout-m-custom-merge: checkout -m path: fix recreating conflicts Conflicts: t/t7201-co.sh
2010-01-06checkout -m path: fix recreating conflictsLibravatar Junio C Hamano1-0/+57
We should tell ll_merge() that the 3-way merge between stages #2 and #3 is an outermost merge, not a virtual-ancestor creation. Back when this code was originally written, users couldn't write custom merge drivers easily, so the bug didn't matter, but these days it does. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-16test: checkout shouldn't say that HEAD has moved if it didn'tLibravatar Nanako Shiraishi1-0/+8
Signed-off-by: しらいしななこ <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07Change double quotes to single quotes in messageLibravatar Jari Aalto1-1/+1
Most of the time when we give branch name in the message, we quote it inside a pair of single-quotes. git-checkout uses double-quotes; this patch corrects the inconsistency. Signed-off-by: Jari Aalto <jari.aalto@cante.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-21Merge branch 'jc/maint-co-track'Libravatar Junio C Hamano1-6/+20
* jc/maint-co-track: Enhance hold_lock_file_for_{update,append}() API demonstrate breakage of detached checkout with symbolic link HEAD Fix "checkout --track -b newbranch" on detached HEAD Conflicts: builtin-commit.c
2008-10-19Enhance hold_lock_file_for_{update,append}() APILibravatar Junio C Hamano1-1/+1
This changes the "die_on_error" boolean parameter to a mere "flags", and changes the existing callers of hold_lock_file_for_update/append() functions to pass LOCK_DIE_ON_ERROR. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-19demonstrate breakage of detached checkout with symbolic link HEADLibravatar Junio C Hamano1-0/+12
When core.prefersymlinkrefs is in use, detaching the HEAD by checkout incorrectly clobbers the tip of the current branch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-17Fix "checkout --track -b newbranch" on detached HEADLibravatar Junio C Hamano1-6/+8
The test to make sure that checkout fails when --track was asked for and we cannot set up tracking information in t7201 was wrong, and it turns out that the implementation for that feature itself was buggy. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-29Merge branch 'jc/better-conflict-resolution'Libravatar Shawn O. Pearce1-2/+121
* jc/better-conflict-resolution: Fix AsciiDoc errors in merge documentation git-merge documentation: describe how conflict is presented checkout --conflict=<style>: recreate merge in a non-default style checkout -m: recreate merge when checking out of unmerged index git-merge-recursive: learn to honor merge.conflictstyle merge.conflictstyle: choose between "merge" and "diff3 -m" styles rerere: understand "diff3 -m" style conflicts with the original rerere.c: use symbolic constants to keep track of parsing states xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less xmerge.c: minimum readability fixups xdiff-merge: optionally show conflicts in "diff3 -m" style xdl_fill_merge_buffer(): separate out a too deeply nested function checkout --ours/--theirs: allow checking out one side of a conflicting merge checkout -f: allow ignoring unmerged paths when checking out of the index Conflicts: Documentation/git-checkout.txt builtin-checkout.c builtin-merge-recursive.c t/t7201-co.sh
2008-09-21Merge branch 'db/maint-checkout-b'Libravatar Junio C Hamano1-0/+10
* db/maint-checkout-b: Check early that a new branch is new and valid
2008-09-21Check early that a new branch is new and validLibravatar Daniel Barkalow1-0/+10
If you fail to update refs to change branches in checkout, your index and working tree are left already updated. We don't have an easy way to undo this, but at least we can check things that would make the creation of a new branch fail. These checks were in the shell version, and were lost in the C conversion. The messages are from the shell version, and should probably be made nicer. [jc: added test to t7201] Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-10Merge branch 'jc/maint-checkout-fix' into maintLibravatar Junio C Hamano1-0/+22
* jc/maint-checkout-fix: checkout: do not check out unmerged higher stages randomly
2008-09-07Merge branch 'jc/maint-checkout-fix'Libravatar Junio C Hamano1-0/+22
* jc/maint-checkout-fix: checkout: do not check out unmerged higher stages randomly Conflicts: t/t7201-co.sh
2008-09-03Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Start 1.6.0.2 maintenance cycle tests: use "git xyzzy" form (t7200 - t9001) tests: use "git xyzzy" form (t7000 - t7199) Fix passwd(5) ref and reflect that commit doens't use commit-tree improve handling of sideband message display tests: use "git xyzzy" form (t3600 - t6999) tests: use "git xyzzy" form (t0000 - t3599) checkout: fix message when leaving detached HEAD clone: fix creation of explicitly named target directory 'git foo' program identifies itself without dash in die() messages setup_git_directory(): fix move to worktree toplevel directory update-index: fix worktree setup Start conforming code to "git subcmd" style read-tree: setup worktree if merge is required grep: fix worktree setup diff*: fix worktree setup Conflicts: RelNotes t/t3900-i18n-commit.sh t/t7003-filter-branch.sh
2008-09-03tests: use "git xyzzy" form (t7200 - t9001)Libravatar Nanako Shiraishi1-1/+1
Converts tests between t7201-t9001. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-31checkout --conflict=<style>: recreate merge in a non-default styleLibravatar Junio C Hamano1-46/+54
This new option does essentially the same thing as -m option when checking unmerged paths out of the index, but it uses the specified style instead of configured merge.conflictstyle. Setting "merge.conflictstyle" to "diff3" is usually less useful than using the default "merge" style, because the latter allows a conflict that results by both sides changing the same region in a very similar way to get simplified substancially by reducing the common lines. However, when one side removed a group of lines (perhaps a function was moved to some other file) while the other side modified it, the default "merge" style does not give any clue as to why the hunk is left conflicting. You would need the original to understand what is going on. The recommended use would be not to set merge.conflictstyle variable so that you would usually use the default "merge" style conflict, and when the result in a path in a particular merge is too hard to understand, use "git checkout --conflict=diff3 $path" to check it out with the original to review what is going on. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-30checkout -m: recreate merge when checking out of unmerged indexLibravatar Junio C Hamano1-0/+63
This teaches git-checkout to recreate a merge out of unmerged index entries while resolving conflicts. With this patch, checking out an unmerged path from the index now have the following possibilities: * Without any option, an attempt to checkout an unmerged path will atomically fail (i.e. no other cleanly-merged paths are checked out either); * With "-f", other cleanly-merged paths are checked out, and unmerged paths are ignored; * With "--ours" or "--theirs, the contents from the specified stage is checked out; * With "-m" (we should add "--merge" as synonym), the 3-way merge is recreated from the staged object names and checked out. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-30checkout --ours/--theirs: allow checking out one side of a conflicting mergeLibravatar Junio C Hamano1-0/+25
This lets you to check out 'our' (or 'their') version of an unmerged path out of the index while resolving conflicts. Signed-off-by: Junio C Hamano <gitster@pobox.com>