| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sparse-checkouts are built on the patterns in the
$GIT_DIR/info/sparse-checkout file, where commands have modified
behavior for paths that do not match those patterns. The differences in
behavior, as far as the bugs concerned here, fall into three different
categories (with git subcommands that fall into each category listed):
* commands that only look at files matching the patterns:
* status
* diff
* clean
* update-index
* commands that remove files from the working tree that do not match
the patterns, and restore files that do match them:
* read-tree
* switch
* checkout
* reset (--hard)
* commands that omit writing files to the working tree that do not
match the patterns, unless those files are not clean:
* merge
* rebase
* cherry-pick
* revert
There are some caveats above, e.g. a plain `git diff` ignores files
outside the sparsity patterns but will show diffs for paths outside the
sparsity patterns when revision arguments are passed. (Technically,
diff is treating the sparse paths as matching HEAD.) So, there is some
internal inconsistency among these commands. There are also additional
commands that should behave differently in the face of sparse-checkouts,
as the sparse-checkout documentation alludes to, but the above is
sufficient for me to explain how `git stash` is affected.
What is relevant here is that logically 'stash' should behave like a
merge; it three-way merges the changes the user had in progress at stash
creation time, the HEAD at the time the stash was created, and the
current HEAD, in order to get the stashed changes applied to the current
branch. However, this simplistic view doesn't quite work in practice,
because stash tweaks it a bit due to two factors: (1) flags like
--keep-index and --include-untracked (why we used two different verbs,
'keep' and 'include', is a rant for another day) modify what should be
staged at the end and include more things that should be quasi-merged,
(2) stash generally wants changes to NOT be staged. It only provides
exceptions when (a) some of the changes had conflicts and thus we want
to use stages to denote the clean merges and higher order stages to
mark the conflicts, or (b) if there is a brand new file we don't want
it to become untracked.
stash has traditionally gotten this special behavior by first doing a
merge, and then when it's clean, applying a pipeline of commands to
modify the result. This series of commands for
unstaging-non-newly-added-files came from the following commands:
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
Looking back at the different types of special sparsity handling listed
at the beginning of this message, you may note that we have at least one
of each type covered here: merge, diff-index, and read-tree. The weird
mix-and-match led to 3 different bugs:
(1) If a path merged cleanly and it didn't match the sparsity patterns,
the merge backend would know to avoid writing it to the working tree and
keep the SKIP_WORKTREE bit, simply only updating it in the index.
Unfortunately, the subsequent commands would essentially undo the
changes in the index and thus simply toss the changes altogether since
there was nothing left in the working tree. This means the stash is
only partially applied.
(2) If a path existed in the worktree before `git stash apply` despite
having the SKIP_WORKTREE bit set, then the `git read-tree --reset` would
print an error message of the form
error: Entry 'modified' not uptodate. Cannot merge.
and cause stash to abort early.
(3) If there was a brand new file added by the stash, then the
diff-index command would save that pathname to the temporary file, the
read-tree --reset would remove it from the index, and the update-index
command would barf due to no such file being present in the working
copy; it would print a message of the form:
error: NEWFILE: does not exist and --remove not passed
fatal: Unable to process path NEWFILE
and then cause stash to abort early.
Basically, the whole idea of unstage-unless-brand-new requires special
care when you are dealing with a sparse-checkout. Fix these problems
by applying the following simple rule:
When we unstage files, if they have the SKIP_WORKTREE bit set,
clear that bit and write the file out to the working directory.
(*) If there's already a file present in the way, rename it first.
This fixes all three problems in t7012.13 and allows us to mark it as
passing.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Applying stashes in sparse-checkouts, particularly when the patterns
used to define the sparseness have changed between when the stash was
created and when it is applied, has a number of bugs. The primary
problem is that stashes are sometimes only partially applied. In most
such cases, it does so silently without any warning or error being
displayed and with 0 exit status.
There are, however, a few cases when non-translated error messages are
shown and the stash application aborts early. The first is when there
are files present despite the SKIP_WORKTREE bit being set, in which case
the error message shown is:
error: Entry 'PATHNAME' not uptodate. Cannot merge.
The other situation is when a stash contains new files to add to the
working tree; in this case, the code aborts early but still has the
stash partially applied, and shows the following error message:
error: NEWFILE: does not exist and --remove not passed
fatal: Unable to process path NEWFILE
Add a test that can trigger all three of these problems. Have it
carefully check that the working copy and SKIP_WORKTREE bits are as
expected after the stash application. The test is currently marked as
expected to fail, but subsequent commits will implement the fixes and
toggle the expectation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df11 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to $EMPTY_TREE this makes it easier to recognize this special
SHA-1 and change hash later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7012 and t7060
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, there are 6 tests which are not even written but are
'test_expect_failure message false'.
Do not abuse test_expect_failure as a to do marker, but mark them as
'#TODO' instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This part is mainly to remove CE_VALID shortcuts (and as a
consequence, ce_uptodate() shortcuts as it may be turned on by
CE_VALID) in writing code path if skip-worktree is used. Various tests
are added to avoid future breakages.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Elijah Newren
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Junio C Hamano
Michael J Gruber