summaryrefslogtreecommitdiff
path: root/t/t7008-grep-binary.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'Libravatar SZEDER Gábor1-4/+2
Using 'test_must_be_empty' is shorter and more idiomatic than >empty && test_cmp empty out as it saves the creation of an empty file. Furthermore, sometimes the expected empty file doesn't have such a descriptive name like 'empty', and its creation is far away from the place where it's finally used for comparison (e.g. in 't7600-merge.sh', where two expected empty files are created in the 'setup' test, but are used only about 500 lines later). These cases were found by instrumenting 'test_cmp' to error out the test script when it's used to compare empty files, and then converted manually. Note that even after this patch there still remain a lot of cases where we use 'test_cmp' to check empty files: - Sometimes the expected output is not hard-coded in the test, but 'test_cmp' is used to ensure that two similar git commands produce the same output, and that output happens to be empty, e.g. the test 'submodule update --merge - ignores --merge for new submodules' in 't7406-submodule-update.sh'. - Repetitive common tasks, including preparing the expected results and running 'test_cmp', are often extracted into a helper function, and some of this helper's callsites expect no output. - For the same reason as above, the whole 'test_expect_success' block is within a helper function, e.g. in 't3070-wildmatch.sh'. - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update (-p)' in 't9400-git-cvsserver-server.sh'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: add tests to fix blind spots with \0 patternsLibravatar Ævar Arnfjörð Bjarmason1-0/+71
Address a big blind spot in the tests for patterns containing \0. The is_fixed() function considers any string that contains \0 fixed, even if it contains regular expression metacharacters, those patterns are currently matched with kwset. Before this change removing that memchr(s, 0, len) check from is_fixed() wouldn't change the result of any of the tests, since regcomp() will happily match the part before the \0. The kwset path is dependent on whether the the -i flag is on, and whether the pattern has any non-ASCII characters, but none of this was tested for. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: prepare for testing binary regexes containing rx metacharactersLibravatar Ævar Arnfjörð Bjarmason1-3/+3
Add setup code needed for testing regexes that contain both binary data and regex metacharacters. The POSIX regcomp() function inherently can't support that, because it takes a \0-delimited char *, but other regex engines APIs like PCRE v2 take a pattern/length pair, and are thus able to handle \0s in patterns as well as any other character. When kwset was imported in commit 9eceddeec6 ("Use kwset in grep", 2011-08-21) this limitation was fixed, but at the expense of introducing the undocumented limitation that any pattern containing \0 implicitly becomes a fixed match (equivalent to -F having been provided). That's not something we'd like to keep in the future. The inability to match patterns containing \0 is a leaky implementation detail. So add tests as a first step towards changing that. In order to test that \0-patterns can properly match as regexes the test string needs to have some regex metacharacters in it. There were other blind spots in the tests. The code around kwset specially handles case-insensitive & non-ASCII data, but there were no tests for this. Fix all of that by amending the text being matched to contain both regex metacharacters & non-ASCII data. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-21grep: add a test helper function for less verbose -f \0 testsLibravatar Ævar Arnfjörð Bjarmason1-29/+29
Add a helper function to make the tests which check for patterns with \0 in them more succinct. Right now this isn't a big win, but subsequent commits will add a lot more of these tests. The helper is based on the match() function in t3070-wildmatch.sh. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-17t: do not hide Git's exit code in tests using 'nul_to_q'Libravatar Lars Schneider1-1/+2
Git should not be on the left-hand side of a pipe, because it hides the exit code, and we want to make sure git does not fail. Fix all invocations of 'nul_to_q' (defined in /t/test-lib-functions.sh) using this pattern. There is one more occurrence of the pattern in t9010-svn-fe.sh which is too evolved to change it easily. All remaining test code that does not adhere to the pattern can be found with the following command: git grep -E 'git.*[^|]\|($|[^|])' Helped-by: Jeff King <peff@peff.net> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-10grep: honor --textconv for the case rev:pathLibravatar Michael J Gruber1-5/+1
Make "grep" honor the "--textconv" option also for the object case, i.e. when used with an argument "rev:path". Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-10grep: allow to use textconv filtersLibravatar Jeff King1-1/+5
Recently and not so recently, we made sure that log/grep type operations use textconv filters when a userfacing diff would do the same: ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28) b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28) 0508fe5 (combine-diff: respect textconv attributes, 2011-05-23) "git grep" currently does not use textconv filters at all, that is neither for displaying the match and context nor for the actual grepping, even when requested by --textconv. Introduce an option "--textconv" which makes git grep use any configured textconv filters for grepping and output purposes. It is off by default. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-10t7008: demonstrate behavior of grep with textconvLibravatar Michael J Gruber1-0/+31
Currently, "git grep" does not honor any textconv filters, with nor without --textconv. Demonstrate this in the tests. The default is expected to remain unchanged. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-12grep: stop looking at random places for .gitattributesLibravatar Nguyễn Thái Ngọc Duy1-0/+22
grep searches for .gitattributes using "name" field in struct grep_source but that field is not real on-disk path name. For example, "grep pattern rev" fills the field with "rev:path", and Git looks for .gitattributes in the (non-existent but exploitable) path "rev:path" instead of "path". This patch passes real paths down to grep_source_load_driver() when: - grep on work tree - grep on the index - grep a commit (or a tag if it points to a commit) so that these cases look up .gitattributes at proper paths. .gitattributes lookup is disabled in all other cases. Initial-work-by: Jeff King <peff@peff.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02grep: respect diff attributes for binary-nessLibravatar Jeff King1-0/+24
There is currently no way for users to tell git-grep that a particular path is or is not a binary file; instead, grep always relies on its auto-detection (or the user specifying "-a" to treat all binary-looking files like text). This patch teaches git-grep to use the same attribute lookup that is used by git-diff. We could add a new "grep" flag, but that is unnecessarily complex and unlikely to be useful. Despite the name, the "-diff" attribute (or "diff=foo" and the associated diff.foo.binary config option) are really about describing the contents of the path. It's simply historical that diff was the only thing that cared about these attributes in the past. And if this simple approach turns out to be insufficient, we still have a backwards-compatible path forward: we can add a separate "grep" attribute, and fall back to respecting "diff" if it is unset. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-20Use kwset in grepLibravatar Fredrik Kuivinen1-2/+2
Benchmarks for the hot cache case: before: $ perf stat --repeat=5 git grep qwerty > /dev/null Performance counter stats for 'git grep qwerty' (5 runs): 3,478,085 cache-misses # 2.322 M/sec ( +- 2.690% ) 11,356,177 cache-references # 7.582 M/sec ( +- 2.598% ) 3,872,184 branch-misses # 0.363 % ( +- 0.258% ) 1,067,367,848 branches # 712.673 M/sec ( +- 2.622% ) 3,828,370,782 instructions # 0.947 IPC ( +- 0.033% ) 4,043,832,831 cycles # 2700.037 M/sec ( +- 0.167% ) 8,518 page-faults # 0.006 M/sec ( +- 3.648% ) 847 CPU-migrations # 0.001 M/sec ( +- 3.262% ) 6,546 context-switches # 0.004 M/sec ( +- 2.292% ) 1497.695495 task-clock-msecs # 3.303 CPUs ( +- 2.550% ) 0.453394396 seconds time elapsed ( +- 0.912% ) after: $ perf stat --repeat=5 git grep qwerty > /dev/null Performance counter stats for 'git grep qwerty' (5 runs): 2,989,918 cache-misses # 3.166 M/sec ( +- 5.013% ) 10,986,041 cache-references # 11.633 M/sec ( +- 4.899% ) (scaled from 95.06%) 3,511,993 branch-misses # 1.422 % ( +- 0.785% ) 246,893,561 branches # 261.433 M/sec ( +- 3.967% ) 1,392,727,757 instructions # 0.564 IPC ( +- 0.040% ) 2,468,142,397 cycles # 2613.494 M/sec ( +- 0.110% ) 7,747 page-faults # 0.008 M/sec ( +- 3.995% ) 897 CPU-migrations # 0.001 M/sec ( +- 2.383% ) 6,535 context-switches # 0.007 M/sec ( +- 1.993% ) 944.384228 task-clock-msecs # 3.177 CPUs ( +- 0.268% ) 0.297257643 seconds time elapsed ( +- 0.450% ) So we gain about 35% by using the kwset code. As a side effect of using kwset two grep tests are fixed by this patch. The first is fixed because kwset can deal with case-insensitive search containing NULs, something strcasestr cannot do. The second one is fixed because we consider patterns containing NULs as fixed strings (regcomp cannot accept patterns with NULs). Signed-off-by: Fredrik Kuivinen <frekui@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-09t/t7008: workaround broken handling of \000 by printf on IRIXLibravatar Brandon Casey1-7/+7
On IRIX 6.5, the printf utility in /usr/bin does not appear to handle the \ddd notation according to POSIX. This printf appears to halt processing of the string argument and ignore any additional characters in the string. Work around this flaw by replacing the \000's with 'Q' and using the q_to_nul helper function provided by test-lib.sh This problem with printf is not apparent when using the Bash shell since Bash implements a POSIX compatible printf function internally. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-19t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTENDLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Now that we have a regex engine that supports REG_STARTEND this test should fail if "git grep" can't grep NULL characters. Platforms that don't have a POSIX regex engine which supports REG_STARTEND should always define NO_REGEX=YesPlease when compiling. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: support NUL chars in search strings for -FLibravatar René Scharfe1-0/+30
Search patterns in a file specified with -f can contain NUL characters. The current code ignores all characters on a line after a NUL. Pass the actual length of the line all the way from the pattern file to fixmatch() and use it for case-sensitive fixed string matching. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: use REG_STARTEND for all matching if availableLibravatar René Scharfe1-0/+10
Refactor REG_STARTEND handling inlook_ahead() into a new helper, regmatch(), and use it for line matching, too. This allows regex matching beyond NUL characters if regexec() supports the flag. NUL characters themselves are not matched in any way, though. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: continue case insensitive fixed string search after NUL charsLibravatar René Scharfe1-0/+4
Functions for C strings, like strcasestr(), can't see beyond NUL characters. Check if there is such an obstacle on the line and try again behind it. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: use memmem() for fixed string searchLibravatar René Scharfe1-0/+4
Allow searching beyond NUL characters by using memmem() instead of strstr(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: --name-only over binaryLibravatar René Scharfe1-0/+6
As with the option -c/--count, git grep with the option -l/--name-only should work the same with binary files as with text files because there is no danger of messing up the terminal with control characters from the contents of matching files. GNU grep does the same. Move the check for ->name_only before the one for binary_match_only, thus making the latter irrelevant for git grep -l. Reported-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: --count over binaryLibravatar René Scharfe1-0/+6
The intent of showing the message "Binary file xyz matches" for binary files is to avoid annoying users by potentially messing up their terminals by printing control characters. In --count mode, this precaution isn't necessary. Display counts of matches if -c/--count was specified, even if -a was not given. GNU grep does the same. Moving the check for ->count before the code for handling binary file also avoids printing context lines if --count and -[ABC] were used together, so we can remove the part of the comment that mentions this behaviour. Again, GNU grep does the same. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24grep: add test script for binary file handlingLibravatar René Scharfe1-0/+42
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>