| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a non-existent program is given as the pager, we tried to
reuse an uninitialized child_process structure and crashed, which
has been fixed.
* em/missing-pager:
pager: fix crash when pager program doesn't exist
|
|
When prepare_cmd() fails for, e.g., pager process setup,
child_process_clear() frees the memory in pager_process.args, but .argv
was pointed to pager_process.args.v earlier in start_command(), so it's
now a dangling pointer.
setup_pager() is then called a second time, from cmd_log_init_finish()
in this case, and any further operations using its .argv, e.g. strvec_*,
will use the dangling pointer and eventually crash. According to trivial
tests, setup_pager() is not called twice if the first call is
successful.
This patch makes sure that pager_process is properly initialized on
setup_pager(). Drop CHILD_PROCESS_INIT from its declaration since it's
no longer really necessary.
Add a test to catch possible regressions.
Reproducer:
$ git config pager.show INVALID_PAGER
$ git show $VALID_COMMIT
error: cannot run INVALID_PAGER: No such file or directory
[1] 3619 segmentation fault (core dumped) git show $VALID_COMMIT
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests in t7006 check for a SIGPIPE result by recording $? and
comparing it with test_match_signal. Before the previous commit, the
command was on the left-hand side of a pipe, and so we had to do some
subshell trickery to extract it.
But now that this is no longer the case, we can do things much more
simply: just run the command directly, using braces to avoid wrecking
the &&-chain, and then record $?. We could almost use test_expect_code
here, but it doesn't know about test_match_signal.
Likewise, for tests which expect success (i.e., not SIGPIPE), we can
just put them in the &&-chain as usual. That even lets us get rid of the
!MINGW check, since the expectation is the same on both sides.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comit c24b7f6736 (pager: test for exit code with and without SIGPIPE,
2021-02-02) introduced some tests that don't reliably generate SIGPIPE
where we expect it (i.e., when our pager doesn't read all of the output
from git-log).
There are two problems that somewhat cancel each other out.
First is that the output of git-log isn't very large (only around 800
bytes). So even if the pager doesn't read all of our output, it's racy
whether or not we'll actually get a SIGPIPE (we won't if we write all of
the output into the pipe buffer before the pager exits).
But we wrap git-log with test_terminal, which is supposed to propagate
the exit status of git-log. However, it doesn't always do so;
test_terminal will copy to stdout any lines that it got from our fake
pager, and it pipes to an empty command. So most of the time we are
seeing a SIGPIPE from test_terminal itself (though this is likewise
racy).
Let's try to make this more robust in two ways:
1. We'll put a commit with a huge message at the tip of history. Since
this is over a megabyte, it should fill the OS pipe buffer
completely, causing git-log to keep trying to write even after the
pager has exited.
2. We'll redirect the output of test_terminal to /dev/null. That means
it can never get SIGPIPE itself, and will always be giving us the
exit code from git-log.
These two changes reveal that one of the tests was looking for the wrong
behavior. If we try to start a pager that does not exist (according to
execve()), then the error propagates from start_command() back to the
pager code as an error, and we avoid redirecting git-log's stdout to the
broken pager entirely. Instead, it goes straight to the original stdout
(test_terminal's pty in this case), and we do not see a SIGPIPE at all.
So the test "git attempts to page to nonexisting pager command, gets
SIGPIPE" is checking the wrong outcome; it should be looking for a
successful exit (and was only confused by test_terminal's SIGPIPE).
There's a related test, "git discards nonexisting pager without
SIGPIPE", which sets the pager to a shell command which will read all
input and _then_ run a non-existing command. But that doesn't trigger
the same execve() behavior. We really do run the shell there and
redirect git-log's stdout to it. And the fact that the shell then exits
127 is not interesting. It is not different at that point than the
earlier test to check for "exit 1". So we can drop that test entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 507d7804c0 (pager: don't use unsafe functions in signal handlers,
2015-09-04), we have a separate code path in wait_or_whine() for the
case that we're in a signal handler. But that code path misses some of
the cases handled by the main logic.
This was improved in be8fc53e36 (pager: properly log pager exit code
when signalled, 2021-02-02), but that covered only case: actually
returning the correct error code. But there are some other cases:
- if waitpid() returns failure, we wouldn't notice and would look at
uninitialized garbage in the status variable; it's not clear if it's
possible to trigger this or not
- if the process exited by signal, then we would still report "-1"
rather than the correct signal code
This latter case even had a test added in be8fc53e36, but it doesn't
work reliably. It sets the pager command to:
>pager-used; test-tool sigchain
The latter command will die by signal, but because there are multiple
commands, there will be a shell in between. And it's the shell whose
waitpid() call will see the signal death, and it will then exit with
code 143, which is what Git will see.
To make matters even more confusing, some shells (such as bash) will
realize that there's nothing for the shell to do after test-tool
finishes, and will turn it into an exec. So the test was only checking
what it thought when /bin/sh points to a shell like bash (we're relying
on the shell used internally by Git to spawn sub-commands here, so even
running the test under bash would not be enough).
This patch adjusts the tests to explicitly call "exec" in the pager
command, which produces a consistent outcome regardless of shell. Note
that without the code change in this patch it _should_ fail reliably,
but doesn't. That test, like its siblings, tries to trigger SIGPIPE in
the git-log process writing to the pager, but only do so racily. That
will be fixed in a follow-on patch.
For the code change here, we have two options:
- we can teach the in_signal code to handle WIFSIGNALED()
- we can stop returning early when in_signal is set, and instead
annotate individual calls that we need to skip in this case
The former is a simpler patch, but means we're essentially duplicating
all of the logic. So instead I went with the latter. The result is a
bigger patch, and we do run the risk of new code being added but
forgetting to handle in_signal. But in the long run it seems more
maintainable.
I've skipped any non-trivial calls for the in_signal case, like calling
error(). We'll also skip the call to clear_child_for_cleanup(), as we
were before. This is arguably the wrong thing to do, since we wouldn't
want to try to clean it up again. But:
- we can't call it as-is, because it calls free(), which we must avoid
in a signal handler (we'd have to pass in_signal so it can skip the
free() call)
- we'll only go through the list of children to clean once, since our
cleanup_children_on_signal() handler pops itself after running (and
then re-raises, so eventually we'd just exit). So this cleanup only
matters if a process is on the cleanup list _and_ it has a separate
handler to clean itself up. Which is questionable in the first place
(and AFAIK we do not do).
- double-cleanup isn't actually that bad anyway. waitpid() will just
return an error, which we won't even report because of in_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed481 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a0 (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
1. https://lore.kernel.org/git/87o8h4omqa.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Modernize the test by replacing `test -e` instances with
`test_path_is_file` helper functions, and `! test -e` with
`test_path_is_missing`, for better readability and diagnostic messages.
Signed-off-by: Joey Salazar <jgsal@protonmail.com>
Reviewed-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous patch, we added a deprecation warning for the current
log.mailmap setting. This warning only appears when git is attached to
a controlling terminal. Some tests however run under an emulated
terminal, so we need to disable the warning for those tests.
Thanks to Junio for suggesting that we do this in the setup function.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.config`
at all when we are not listing or getting configuration. This change
will help with listing large configurations, but will not hurt users of
`git config --edit` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.config` when we are listing or "get"ing config.
We have several getters and some are guaranteed to give at most one line
of output. Paging all getters including those could be convenient from a
documentation point-of-view. The downside would be that a misconfigured
or not so modern pager might wait for user interaction before
terminating. Let's instead respect the config for precisely those
getters which may produce more than one line of output.
`--get-urlmatch` may or may not produce multiple lines of output,
depending on the exact usage. Let's not try to recognize the two modes,
but instead make `--get-urlmatch` always respect the config. Analyzing
the detailed usage might be trivial enough here, but could establish a
precedent that we will never be able to enforce throughout the codebase
and that will just open a can of worms.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git config foo.bar bar` and `git config --get foo.bar`
respects `pager.config`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next couple of commits will change how `git config` handles
`pager.config`, similar to how de121ffe5 (tag: respect `pager.tag` in
list-mode only, 2017-08-02) and ff1e72483 (tag: change default of
`pager.tag` to "on", 2017-08-02) changed `git tag`. Similar work has
also been done to `git branch`.
Add tests in this area to make sure that we don't regress and so that
the upcoming commits can be made clearer by adapting the tests. Add
tests for simple config-setting, `--edit`, `--get`, `--get-urlmatch`,
`get-all`, and `--list`. Those represent a fair portion of the various
options that will be affected by the next two commits.
Use `test_expect_failure` to document that we currently respect the
pager-configuration with `--edit`. The current behavior is buggy since
the pager interferes with the editor and makes the end result completely
broken. See also b3ee740c8 (t7006: add tests for how git tag paginates,
2017-08-02).
The next commit will teach simple config-setting and `--get` to ignore
`pager.config`. Test the current behavior as "success", not "failure",
since the currently expected behavior according to documentation would
be to page. The next commit will change that expectation by updating the
documentation on `git config` and will redefine those successful tests.
Remove the test added in commit 3ba7e6e29a (config: run
setup_git_directory_gently() sooner, 2010-08-05) since it has some
overlap with these. We could leave it or tweak it, or place new tests
like these next to it, but let's instead make the tests for `git config`
as similar as possible to the ones for `git tag` and `git branch`, and
place them after those.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
|
|
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next couple of commits will change how `git branch` handles
`pager.branch`, similar to how de121ffe5 (tag: respect `pager.tag` in
list-mode only, 2017-08-02) and ff1e72483 (tag: change default of
`pager.tag` to "on", 2017-08-02) changed `git tag`.
Add tests in this area to make sure that we don't regress and so that
the upcoming commits can be made clearer by adapting the tests. Add some
tests for `--list` (implied), one for `--edit-description`, and one for
`--set-upstream-to` as a representative of "something other than the
first two".
In particular, use `test_expect_failure` to document that we currently
respect the pager-configuration with `--edit-description`. The current
behavior is buggy since the pager interferes with the editor and makes
the end result completely broken. See also b3ee740c8 (t7006: add tests
for how git tag paginates, 2017-08-02).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
|
|
When columns are set to automatic for git tag and the output is
paginated by git, the output is a single column instead of multiple
columns.
Standard behaviour in git is to honor auto values when the pager is
active, which happens for example with commands like git log showing
colors when being paged.
Since ff1e72483 (tag: change default of `pager.tag` to "on",
2017-08-02), the pager has been enabled by default, exposing this
problem to more people.
finalize_colopts in column.c only checks whether the output is a TTY to
determine if columns should be enabled with columns set to auto. Also
check if the pager is active.
Adding a test for git column is possible but requires some care to work
around a race on stdin. See commit 18d8c2693 (test_terminal: redirect
child process' stdin to a pty, 2015-08-04). Test git tag instead, since
that does not involve stdin, and since that was the original motivation
for this patch.
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running, e.g., `git -c alias.bar=foo bar`, we expand the alias and
execute `git-foo` as a dashed external. This is true even if git foo is
a builtin. That is on purpose, and is motivated in a comment which was
added in commit 441981bc ("git: simplify environment save/restore
logic", 2016-01-26).
Shortly before we launch a dashed external, and unless we have already
found out whether we should use a pager, we check `pager.foo`. This was
added in commit 92058e4d ("support pager.* for external commands",
2011-08-18). If the dashed external is a builtin, this does not match
that commit's intention and is arguably wrong, since it would be cleaner
if we let the "dashed external builtin" handle `pager.foo`.
This has not mattered in practice, but a recent patch taught `git-tag`
to ignore `pager.tag` under certain circumstances. But, when started
using an alias, it doesn't get the chance to do so, as outlined above.
That recent patch added a test to document this breakage.
Do not check `pager.foo` before launching a builtin as a dashed
external, i.e., if we recognize the name of the external as a builtin.
Change the test to use `test_expect_success`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Since we're about to change how `git tag` respects `pager.tag`, add tests
around this, including how the configuration is ignored if --no-pager or
--paginate are used.
Construct tests with a few different subcommands. First, use -l. Second,
use "no arguments" and --contains, since those imply -l. (There are
more arguments which imply -l, but using these two should be enough.)
Third, use -a as a representative for "not -l". Actually, the tests use
`git tag -am` so no editor is launched, but that is irrelevant, since we
just want to see whether the pager is used or not. Make one of the tests
demonstrate the broken behavior mentioned above, where `git tag -a`
respects `pager.tag`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When expanding aliases, the git_dir is set during the alias expansion
(by virtue of running setup_git_directory_gently()).
This git_dir may be relative to the current working directory, and
indeed often is simply ".git/".
When the alias expands to a shell command, we restore the original
working directory, though, yet we do not reset git_dir.
As a consequence, subsequent read_early_config() runs will mistake the
git_dir to be populated properly and not find the correct config.
Demonstrate this problem by adding a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of the test case "git -p - core.pager is not used from
subdirectory" was to verify that the setup_git_directory() function had
not been called just to obtain the core.pager setting.
However, we are about to fix the early config machinery so that it
*does* work, without messing up the global state.
Once that is done, the core.pager setting *will* be used, even when
running from a subdirectory, and that is a Good Thing.
The intention of that test case, however, was to verify that the
setup_git_directory() function has not run, because it changes global
state such as the current working directory.
To keep that spirit, but fix the incorrect assumption, this patch
replaces that test case by a new one that verifies that the pager is
run in the subdirectory, i.e. that the current working directory has
not been changed at the time the pager is configured and launched, even
if the `rev-parse` command requires a .git/ directory and *will* change
the working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allowing PAGER_ENV to be set at build-time allows us to move
pager-specific knowledge out of our build. This allows us to
set a better default for FreeBSD more(1), which pretends not to
understand ANSI color escapes if the MORE environment variable
is left empty, but accepts the same variables as less(1)
Originally-from:
https://public-inbox.org/git/xmqq61piw4yf.fsf@gitster.dls.corp.google.com/
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
|
|
When we are running the git command "foo", we may have to
look up the config keys "pager.foo" and "alias.foo". These
config schemes are mis-designed, as the command names can be
anything, but the config syntax has some restrictions. For
example:
$ git foo_bar
error: invalid key: pager.foo_bar
error: invalid key: alias.foo_bar
git: 'foo_bar' is not a git command. See 'git --help'.
You cannot name an alias with an underscore. And if you have
an external command with one, you cannot configure its
pager.
In the long run, we may develop a different config scheme
for these features. But in the near term (and because we'll
need to support the existing scheme indefinitely), we should
at least squelch the error messages shown above.
These errors come from git_config_parse_key. Ideally we
would pass a "quiet" flag to the config machinery, but there
are many layers between the pager code and the key parsing.
Passing a flag through all of those would be an invasive
change.
Instead, let's provide a config function to report on
whether a key is syntactically valid, and have the pager and
alias code skip lookup for bogus keys. We can build this
easily around the existing git_config_parse_key, with two
minor modifications:
1. We now handle a NULL store_key, to validate but not
write out the normalized key.
2. We accept a "quiet" flag to avoid writing to stderr.
This doesn't need to be a full-blown public "flags"
field, because we can make the existing implementation
a static helper function, keeping the mess contained
inside config.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise there is a race: if 'git log' finishes writing before the
pager terminates and closes the pipe, all is well, and if the pager
finishes quickly enough then 'git log' terminates with SIGPIPE.
died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33.
not ok 6 - LESS and LV envvars are set for pagination
Noticed on Ubuntu PPA builders, where the race was lost about half the
time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager,
2010-02-22).
Reported-by: Anders Kaseorg <andersk@MIT.EDU>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
$ git diff
^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m
^[[1mindex aa4f0b2..17e113e 100644^[[m
^[[1m--- a/.mailfilter^[[m
^[[1m+++ b/.mailfilter^[[m
^[[36m@@ -1,11 +1,58 @@^[[m
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script uses the following idiom to start each test in a known
good state:
test_expect_success 'some commands use a pager' '
rm -f paginated.out || cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
where "cleanup_fail" is a function that prints an error message and
errors out.
That is bogus on three levels:
- Cleanup commands like "rm -f" and "test_unconfig" are designed not
to fail, so this logic would never trip.
- If they were to malfunction anyway, it is not useful to set apart
cleanup commands as a special kind of failure with a special error
message. Whichever command fails, the next step is to investigate
which command that was, for example by running tests with
"prove -e 'sh -x'", and fix it.
- Relying on left-associativity of mixed &&/|| lists makes the code
somewhat cryptic.
The fix is simple: drop the "|| cleanup_fail" in each test and the
definition of the "cleanup_fail" function so no new callers can arise.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this patch, any commands that are not builtin would
not respect pager.* config. For example:
git config pager.stash false
git stash list
would still use a pager. With this patch, pager.stash now
has an effect. If it is not specified, we will still fall
back to pager.log when we invoke "log" from "stash list".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have always set a global "spawned_pager" variable when we
start the pager. This lets us make the auto-color decision
later in the program as as "we are outputting to a terminal,
or to a pager which can handle colors".
Commit 6e9af86 added support for the GIT_PAGER_IN_USE
environment variable. An external program calling git (e.g.,
git-svn) could set this variable to indicate that it had
already started the pager, and that the decision about
auto-coloring should take that into account.
However, 6e9af86 failed to do the reverse, which is to tell
external programs when git itself has started the pager.
Thus a git command implemented as an external script that
has the pager turned on (e.g., "git -p stash show") would
not realize it was going to a pager, and would suppress
colors.
This patch remedies that; we always set GIT_PAGER_IN_USE
when we start the pager, and the value is respected by both
this program and any spawned children.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, this is just making the test script a little
shorter and easier to read. However, there are several
places where we didn't take proper precautions against
polluting downstream tests with our config; this fixes them,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests break &&-chaining to deal with broken "unset"
implementations. Instead, they should just use sane_unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/pager-per-command:
allow command-specific pagers in pager.<cmd>
|
|
* en/and-cascade-tests: (25 commits)
t4124 (apply --whitespace): use test_might_fail
t3404: do not use 'describe' to implement test_cmp_rev
t3404 (rebase -i): introduce helper to check position of HEAD
t3404 (rebase -i): move comment to description
t3404 (rebase -i): unroll test_commit loops
t3301 (notes): use test_expect_code for clarity
t1400 (update-ref): use test_must_fail
t1502 (rev-parse --parseopt): test exit code from "-h"
t6022 (renaming merge): chain test commands with &&
test-lib: introduce test_line_count to measure files
tests: add missing &&, batch 2
tests: add missing &&
Introduce sane_unset and use it to ensure proper && chaining
t7800 (difftool): add missing &&
t7601 (merge-pull-config): add missing &&
t7001 (mv): add missing &&
t6016 (rev-list-graph-simplify-history): add missing &&
t5602 (clone-remote-exec): add missing &&
t4026 (color): remove unneeded and unchained command
t4019 (diff-wserror): add lots of missing &&
...
Conflicts:
t/t7006-pager.sh
|
|
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Enzo Matsumiya
Jeff King
Ævar Arnfjörð Bjarmason
Joey Salazar
Ariadne Conill
Martin Ågren
Kevin Daudt
Johannes Schindelin
Eric Wong
Elia Pinto
David Tran
Jonathan Nieder
Elijah Newren