| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
|
|
When we are running the git command "foo", we may have to
look up the config keys "pager.foo" and "alias.foo". These
config schemes are mis-designed, as the command names can be
anything, but the config syntax has some restrictions. For
example:
$ git foo_bar
error: invalid key: pager.foo_bar
error: invalid key: alias.foo_bar
git: 'foo_bar' is not a git command. See 'git --help'.
You cannot name an alias with an underscore. And if you have
an external command with one, you cannot configure its
pager.
In the long run, we may develop a different config scheme
for these features. But in the near term (and because we'll
need to support the existing scheme indefinitely), we should
at least squelch the error messages shown above.
These errors come from git_config_parse_key. Ideally we
would pass a "quiet" flag to the config machinery, but there
are many layers between the pager code and the key parsing.
Passing a flag through all of those would be an invasive
change.
Instead, let's provide a config function to report on
whether a key is syntactically valid, and have the pager and
alias code skip lookup for bogus keys. We can build this
easily around the existing git_config_parse_key, with two
minor modifications:
1. We now handle a NULL store_key, to validate but not
write out the normalized key.
2. We accept a "quiet" flag to avoid writing to stderr.
This doesn't need to be a full-blown public "flags"
field, because we can make the existing implementation
a static helper function, keeping the mess contained
inside config.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise there is a race: if 'git log' finishes writing before the
pager terminates and closes the pipe, all is well, and if the pager
finishes quickly enough then 'git log' terminates with SIGPIPE.
died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33.
not ok 6 - LESS and LV envvars are set for pagination
Noticed on Ubuntu PPA builders, where the race was lost about half the
time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager,
2010-02-22).
Reported-by: Anders Kaseorg <andersk@MIT.EDU>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
$ git diff
^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m
^[[1mindex aa4f0b2..17e113e 100644^[[m
^[[1m--- a/.mailfilter^[[m
^[[1m+++ b/.mailfilter^[[m
^[[36m@@ -1,11 +1,58 @@^[[m
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script uses the following idiom to start each test in a known
good state:
test_expect_success 'some commands use a pager' '
rm -f paginated.out || cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
where "cleanup_fail" is a function that prints an error message and
errors out.
That is bogus on three levels:
- Cleanup commands like "rm -f" and "test_unconfig" are designed not
to fail, so this logic would never trip.
- If they were to malfunction anyway, it is not useful to set apart
cleanup commands as a special kind of failure with a special error
message. Whichever command fails, the next step is to investigate
which command that was, for example by running tests with
"prove -e 'sh -x'", and fix it.
- Relying on left-associativity of mixed &&/|| lists makes the code
somewhat cryptic.
The fix is simple: drop the "|| cleanup_fail" in each test and the
definition of the "cleanup_fail" function so no new callers can arise.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this patch, any commands that are not builtin would
not respect pager.* config. For example:
git config pager.stash false
git stash list
would still use a pager. With this patch, pager.stash now
has an effect. If it is not specified, we will still fall
back to pager.log when we invoke "log" from "stash list".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have always set a global "spawned_pager" variable when we
start the pager. This lets us make the auto-color decision
later in the program as as "we are outputting to a terminal,
or to a pager which can handle colors".
Commit 6e9af86 added support for the GIT_PAGER_IN_USE
environment variable. An external program calling git (e.g.,
git-svn) could set this variable to indicate that it had
already started the pager, and that the decision about
auto-coloring should take that into account.
However, 6e9af86 failed to do the reverse, which is to tell
external programs when git itself has started the pager.
Thus a git command implemented as an external script that
has the pager turned on (e.g., "git -p stash show") would
not realize it was going to a pager, and would suppress
colors.
This patch remedies that; we always set GIT_PAGER_IN_USE
when we start the pager, and the value is respected by both
this program and any spawned children.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, this is just making the test script a little
shorter and easier to read. However, there are several
places where we didn't take proper precautions against
polluting downstream tests with our config; this fixes them,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests break &&-chaining to deal with broken "unset"
implementations. Instead, they should just use sane_unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/pager-per-command:
allow command-specific pagers in pager.<cmd>
|
|
* en/and-cascade-tests: (25 commits)
t4124 (apply --whitespace): use test_might_fail
t3404: do not use 'describe' to implement test_cmp_rev
t3404 (rebase -i): introduce helper to check position of HEAD
t3404 (rebase -i): move comment to description
t3404 (rebase -i): unroll test_commit loops
t3301 (notes): use test_expect_code for clarity
t1400 (update-ref): use test_must_fail
t1502 (rev-parse --parseopt): test exit code from "-h"
t6022 (renaming merge): chain test commands with &&
test-lib: introduce test_line_count to measure files
tests: add missing &&, batch 2
tests: add missing &&
Introduce sane_unset and use it to ensure proper && chaining
t7800 (difftool): add missing &&
t7601 (merge-pull-config): add missing &&
t7001 (mv): add missing &&
t6016 (rev-list-graph-simplify-history): add missing &&
t5602 (clone-remote-exec): add missing &&
t4026 (color): remove unneeded and unchained command
t4019 (diff-wserror): add lots of missing &&
...
Conflicts:
t/t7006-pager.sh
|
|
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git bundle unbundle" and "git config" pagination tests are not
supposed to run when stdout is not a terminal and IO::Pty not available
to make one on the fly.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git grep already runs a repository search unconditionally,
even when the --no-index option is supplied; running such a
search earlier is not very risky.
Just like with shortlog, without this change, the
“[pager] grep” configuration is not respected at all.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
shortlog already runs a repository search unconditionally;
running such a search earlier is not very risky.
Without this change, the “[pager] shortlog” configuration
is not respected at all: “git shortlog” unconditionally paginates.
The tests are a bit slow. Running the full battery like this
for all built-in commands would be counterproductive; the intent is
rather to test shortlog as a representative example command using
..._gently().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
|
|
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/tap:
t/README: document more test helpers
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
t/t9700/test.pl: don't access private object members, use public access methods
t9700: Use Test::More->builder, not $Test::Builder::Test
tests: Say "pass" rather than "ok" on empty lines for TAP
tests: Skip tests in a way that makes sense under TAP
test-lib: output a newline before "ok" under a TAP harness
test-lib: Make the test_external_* functions TAP-aware
test-lib: Adjust output to be valid TAP format
|
|
* jn/grep-open:
t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script
t/t7811-grep-open.sh: ensure fake "less" is made executable
t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression
grep -O: allow optional argument specifying the pager (or editor)
grep: Add the option '--open-files-in-pager'
Unify code paths of threaded greps
grep: refactor grep_objects loop into its own function
Conflicts:
t/t7006-pager.sh
|
|
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration. If --paginate is handled before searching for the
git dir, this configuration will be missed.
In other words, with --paginate and only with --paginate, any
repository-local core.pager setting is being ignored [*].
[*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was
set explicitly.
Add a test to demonstrate this counterintuitive behavior. Noticed
while reading over a patch by Duy that fixes it.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test choice of pager at several stages of repository setup. This
provides some (admittedly uninteresting) examples to keep in mind when
considering changes to the setup procedure.
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current tests test pager configuration for ‘git log’, but other
commands use a different setup procedure and should therefore be
tested separately. Add a helper to make this easier.
This patch introduces the helper and changes some existing tests to
use it. The only functional change should be the introduction of ‘git
log - ’ to a few test descriptions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Update draft release notes to 1.7.1.1
tests: remove unnecessary '^' from 'expr' regular expression
Conflicts:
diff.c
|
|
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds an option to open the matching files in the pager, and if the
pager happens to be "less" (or "vi") and there is only one grep pattern,
it also jumps to the first match right away.
The short option was chose as '-O' to avoid clashes with GNU grep's
options (as suggested by Junio).
So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)'
except that it works also with spaces in file names, and it does not
start the pager if there was no matching file.
[jn: rebased and added tests; with error handling fix from Junio
squashed in]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The unset builtin of Solaris's xpg4/sh returns non-zero if it is passed a
variable name which was not previously set. Since the unset is not likely
to fail, ignore its return status, but add a semicolon as a clue that the
'&&' was deliberately left off.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of these tests are removing files, environment variables, and
configuration that might interfere outside the test. Putting these
clean-up commands in the test (in the same spirit as v1.7.1-rc0~59,
2010-03-20) means that errors during setup will be caught quickly and
non-error text will be suppressed without -v.
While at it, apply some other minor fixes:
- do not rely on the shell to export variables defined with the same
command as a function call
- avoid whitespace immediately after the > redirection operator, for
consistency with the style of other tests
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pagers that do not consume their input are dangerous: for example,
$ GIT_PAGER=: git log
$ echo $?
141
$
The only reason these tests were able to work before was that
'git log' would write to the pipe (and not fill it) before the
pager had time to terminate and close the pipe.
Fix it by using a program that consumes its input, namely wc (as
suggested by Johannes).
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Testing pagination requires (fake or real) access to a terminal so we
can see whether the pagination automatically kicks in, which makes it
hard to get good coverage when running tests without --verbose. There
are a number of ways to work around that:
- Replace all isatty calls with calls to a custom xisatty wrapper
that usually checks for a terminal but can be overridden for tests.
This would be workable, but it would require implementing xisatty
separately in three languages (C, shell, and perl) and making sure
that any code that is to be tested always uses the wrapper.
- Redirect stdout to /dev/tty. This would be problematic because
there might be no terminal available, and even if a terminal is
available, it might not be appropriate to spew output to it.
- Create a new pseudo-terminal on the fly and capture its output.
This patch implements the third approach.
The new test-terminal.perl helper uses IO::Pty from Expect.pm to create
a terminal and executes the program specified by its arguments with
that terminal as stdout. If the IO::Pty module is missing or not
working on a system, the test script will maintain its old behavior
(skipping most of its tests unless GIT_TEST_OPTS includes --verbose).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git’s automatic pagination support has some subtleties. Add some
tests to make sure we don’t break:
- when git will use a pager by default;
- the effect of the --paginate and --no-pager options;
- the effect of pagination on use of color;
- how the choice of pager is configured.
This does not yet test:
- use of pager by scripted commands (git svn and git am);
- effect of the pager.* configuration variables;
- setting of the LESS variable.
Some features involve checking whether stdout is a terminal, so many
of these tests are skipped unless output is passed through to the
terminal (i.e., unless $GIT_TEST_OPTS includes --verbose).
The immediate purpose for these tests was to avoid making things worse
after the breakage from my jn/editor-pager series (see commit 376f39,
2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com>
for the report.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
David Tran
Jonathan Nieder
Elijah Newren
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Brandon Casey