summaryrefslogtreecommitdiff
path: root/t/t7006-pager.sh
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15alias: use the early config machinery to expand aliasesLibravatar Johannes Schindelin1-1/+1
Instead of discovering the .git/ directory, reading the config and then trying to painstakingly reset all the global state if we did not find a matching alias, let's use the early config machinery instead. It may look like unnecessary work to discover the .git/ directory in the early config machinery and then call setup_git_directory_gently() in the case of a shell alias, repeating the very same discovery *again*. However, we have to do this as the early config machinery takes pains *not* to touch any global state, while shell aliases expect a possibly changed working directory and at least the GIT_PREFIX and GIT_DIR variables to be set. This change also fixes a known issue where Git tried to read the pager config from an incorrect path in a subdirectory of a Git worktree if an alias expanded to a shell command. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15t7006: demonstrate a problem with aliases in subdirectoriesLibravatar Johannes Schindelin1-0/+11
When expanding aliases, the git_dir is set during the alias expansion (by virtue of running setup_git_directory_gently()). This git_dir may be relative to the current working directory, and indeed often is simply ".git/". When the alias expands to a shell command, we restore the original working directory, though, yet we do not reset git_dir. As a consequence, subsequent read_early_config() runs will mistake the git_dir to be populated properly and not find the correct config. Demonstrate this problem by adding a test case. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14read_early_config(): really discover .git/Libravatar Johannes Schindelin1-4/+4
Earlier, we punted and simply assumed that we are in the top-level directory of the project, and that there is no .git file but a .git/ directory so that we can read directly from .git/config. However, that is not necessarily true. We may be in a subdirectory. Or .git may be a gitfile. Or the environment variable GIT_DIR may be set. To remedy this situation, we just refactored the way setup_git_directory() discovers the .git/ directory, to make it reusable, and more importantly, to leave all global variables and the current working directory alone. Let's discover the .git/ directory correctly in read_early_config() by using that new function. This fixes 4 known breakages in t7006. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-03t7006: replace dubious testLibravatar Johannes Schindelin1-1/+11
The idea of the test case "git -p - core.pager is not used from subdirectory" was to verify that the setup_git_directory() function had not been called just to obtain the core.pager setting. However, we are about to fix the early config machinery so that it *does* work, without messing up the global state. Once that is done, the core.pager setting *will* be used, even when running from a subdirectory, and that is a Good Thing. The intention of that test case, however, was to verify that the setup_git_directory() function has not run, because it changes global state such as the current working directory. To keep that spirit, but fix the incorrect assumption, this patch replaces that test case by a new one that verifies that the pager is run in the subdirectory, i.e. that the current working directory has not been changed at the time the pager is configured and launched, even if the `rev-parse` command requires a .git/ directory and *will* change the working directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-04pager: move pager-specific setup into the buildLibravatar Eric Wong1-0/+13
Allowing PAGER_ENV to be set at build-time allows us to move pager-specific knowledge out of our build. This allows us to set a better default for FreeBSD more(1), which pretends not to understand ANSI color escapes if the MORE environment variable is left empty, but accepts the same variables as less(1) Originally-from: https://public-inbox.org/git/xmqq61piw4yf.fsf@gitster.dls.corp.google.com/ Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-07t/t7006-pager.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-1/+1
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-31Merge branch 'jk/fix-alias-pager-config-key-warnings'Libravatar Junio C Hamano1-0/+9
Because the configuration system does not allow "alias.0foo" and "pager.0foo" as the configuration key, the user cannot use '0foo' as a custom command name anyway, but "git 0foo" tried to look these keys up and emitted useless warnings before saying '0foo is not a git command'. These warning messages have been squelched. * jk/fix-alias-pager-config-key-warnings: config: silence warnings for command names with invalid keys
2015-08-24config: silence warnings for command names with invalid keysLibravatar Jeff King1-0/+9
When we are running the git command "foo", we may have to look up the config keys "pager.foo" and "alias.foo". These config schemes are mis-designed, as the command names can be anything, but the config syntax has some restrictions. For example: $ git foo_bar error: invalid key: pager.foo_bar error: invalid key: alias.foo_bar git: 'foo_bar' is not a git command. See 'git --help'. You cannot name an alias with an underscore. And if you have an external command with one, you cannot configure its pager. In the long run, we may develop a different config scheme for these features. But in the near term (and because we'll need to support the existing scheme indefinitely), we should at least squelch the error messages shown above. These errors come from git_config_parse_key. Ideally we would pass a "quiet" flag to the config machinery, but there are many layers between the pager code and the key parsing. Passing a flag through all of those would be an invasive change. Instead, let's provide a config function to report on whether a key is syntactically valid, and have the pager and alias code skip lookup for bogus keys. We can build this easily around the existing git_config_parse_key, with two minor modifications: 1. We now handle a NULL store_key, to validate but not write out the normalized key. 2. We accept a "quiet" flag to avoid writing to stderr. This doesn't need to be a full-blown public "flags" field, because we can make the existing implementation a static helper function, keeping the mess contained inside config.c. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-19tests: use "env" to run commands with temporary env-var settingsLibravatar David Tran1-15/+3
Ordinarily, we would say "VAR=VAL command" to execute a tested command with environment variable(s) set only for that command. This however does not work if 'command' is a shell function (most notably 'test_must_fail'); the result of the assignment is retained and affects later commands. To avoid this, we used to assign and export environment variables and run such a test in a subshell, like so: ( VAR=VAL && export VAR && test_must_fail git command to be tested ) But with "env" utility, we should be able to say: test_must_fail env VAR=VAL git command to be tested which is much shorter and easier to read. Signed-off-by: David Tran <unsignedzero@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-31pager test: make fake pager consume all its inputLibravatar Jonathan Nieder1-1/+1
Otherwise there is a race: if 'git log' finishes writing before the pager terminates and closes the pipe, all is well, and if the pager finishes quickly enough then 'git log' terminates with SIGPIPE. died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33. not ok 6 - LESS and LV envvars are set for pagination Noticed on Ubuntu PPA builders, where the race was lost about half the time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager, 2010-02-22). Reported-by: Anders Kaseorg <andersk@MIT.EDU> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-07pager: set LV=-c alongside LESS=FRSXLibravatar Jonathan Nieder1-0/+12
On systems with lv configured as the preferred pager (i.e., DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the environment) git commands that use color show control codes instead of color in the pager: $ git diff ^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m ^[[1mindex aa4f0b2..17e113e 100644^[[m ^[[1m--- a/.mailfilter^[[m ^[[1m+++ b/.mailfilter^[[m ^[[36m@@ -1,11 +1,58 @@^[[m "less" avoids this problem because git uses the LESS environment variable to pass the -R option ('output ANSI color escapes in raw form') by default. Use the LV environment variable to pass 'lv' the -c option ('allow ANSI escape sequences for text decoration / color') to fix it for lv, too. Noticed when the default value for color.ui flipped to 'auto' in v1.8.4-rc0~36^2~1 (2013-06-10). Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-14test: errors preparing for a test are not specialLibravatar Jonathan Nieder1-56/+17
This script uses the following idiom to start each test in a known good state: test_expect_success 'some commands use a pager' ' rm -f paginated.out || cleanup_fail && test_terminal git log && test -e paginated.out ' where "cleanup_fail" is a function that prints an error message and errors out. That is bogus on three levels: - Cleanup commands like "rm -f" and "test_unconfig" are designed not to fail, so this logic would never trip. - If they were to malfunction anyway, it is not useful to set apart cleanup commands as a special kind of failure with a special error message. Whichever command fails, the next step is to investigate which command that was, for example by running tests with "prove -e 'sh -x'", and fix it. - Relying on left-associativity of mixed &&/|| lists makes the code somewhat cryptic. The fix is simple: drop the "|| cleanup_fail" in each test and the definition of the "cleanup_fail" function so no new callers can arise. Reported-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19support pager.* for external commandsLibravatar Jeff King1-0/+36
Without this patch, any commands that are not builtin would not respect pager.* config. For example: git config pager.stash false git stash list would still use a pager. With this patch, pager.stash now has an effect. If it is not specified, we will still fall back to pager.log when we invoke "log" from "stash list". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19color: delay auto-color decision until point of useLibravatar Jeff King1-0/+12
When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18setup_pager: set GIT_PAGER_IN_USELibravatar Jeff King1-0/+11
We have always set a global "spawned_pager" variable when we start the pager. This lets us make the auto-color decision later in the program as as "we are outputting to a terminal, or to a pager which can handle colors". Commit 6e9af86 added support for the GIT_PAGER_IN_USE environment variable. An external program calling git (e.g., git-svn) could set this variable to indicate that it had already started the pager, and that the decision about auto-coloring should take that into account. However, 6e9af86 failed to do the reverse, which is to tell external programs when git itself has started the pager. Thus a git command implemented as an external script that has the pager turned on (e.g., "git -p stash show") would not realize it was going to a pager, and would suppress colors. This patch remedies that; we always set GIT_PAGER_IN_USE when we start the pager, and the value is respected by both this program and any spawned children. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18t7006: use test_config helpersLibravatar Jeff King1-21/+18
In some cases, this is just making the test script a little shorter and easier to read. However, there are several places where we didn't take proper precautions against polluting downstream tests with our config; this fixes them, too. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18t7006: modernize calls to unsetLibravatar Jeff King1-2/+2
These tests break &&-chaining to deal with broken "unset" implementations. Instead, they should just use sane_unset. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-08Merge branch 'jk/pager-per-command'Libravatar Junio C Hamano1-0/+29
* jk/pager-per-command: allow command-specific pagers in pager.<cmd>
2010-11-24Merge branch 'en/and-cascade-tests'Libravatar Junio C Hamano1-5/+5
* en/and-cascade-tests: (25 commits) t4124 (apply --whitespace): use test_might_fail t3404: do not use 'describe' to implement test_cmp_rev t3404 (rebase -i): introduce helper to check position of HEAD t3404 (rebase -i): move comment to description t3404 (rebase -i): unroll test_commit loops t3301 (notes): use test_expect_code for clarity t1400 (update-ref): use test_must_fail t1502 (rev-parse --parseopt): test exit code from "-h" t6022 (renaming merge): chain test commands with && test-lib: introduce test_line_count to measure files tests: add missing &&, batch 2 tests: add missing && Introduce sane_unset and use it to ensure proper && chaining t7800 (difftool): add missing && t7601 (merge-pull-config): add missing && t7001 (mv): add missing && t6016 (rev-list-graph-simplify-history): add missing && t5602 (clone-remote-exec): add missing && t4026 (color): remove unneeded and unchained command t4019 (diff-wserror): add lots of missing && ... Conflicts: t/t7006-pager.sh
2010-11-17allow command-specific pagers in pager.<cmd>Libravatar Jeff King1-0/+29
A user may want different pager settings or even a different pager for various subcommands (e.g., because they use different less settings for "log" vs "diff", or because they have a pager that interprets only log output but not other commands). This patch extends the pager.<cmd> syntax to support not only boolean to-page-or-not-to-page, but also to specify a pager just for a specific command. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-18test_terminal: catch use without TTY prerequisiteLibravatar Jonathan Nieder1-6/+1
It is easy to forget to declare the TTY prerequisite when writing tests on a system where it would always be satisfied (because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16 for example). Automatically detect this problem so there is no need to remember. test_terminal: need to declare TTY prerequisite test_must_fail: command not found: test_terminal echo hi test_terminal returns status 127 in this case to simulate not being available. Also replace the SIMPLEPAGERTTY prerequisite on one test with "SIMPLEPAGER,TTY", since (1) the latter is supported now and (2) the prerequisite detection relies on the TTY prereq being explicitly declared. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-18tests: factor out terminal handling from t7006Libravatar Jeff King1-30/+1
Other tests besides the pager ones may want to check how we handle output to a terminal. This patch makes the code reusable. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Introduce sane_unset and use it to ensure proper && chainingLibravatar Elijah Newren1-5/+5
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-16t7006 (pager): add missing TTY prerequisitesLibravatar Jonathan Nieder1-2/+2
The "git bundle unbundle" and "git config" pagination tests are not supposed to run when stdout is not a terminal and IO::Pty not available to make one on the fly. Reported-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15config: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+8
For the pager choice (and the choice to paginate) to reflect the current repository configuration, the repository needs to be located first. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15bundle: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+33
Without this change, “git -p bundle” does not always respect the repository-local “[core] pager” setting. It is hard to notice because subcommands other than “git bundle unbundle” do not produce much output. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15apply: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+3
As v1.7.2~16^2 (2010-07-14) explains, without this change, “git --paginate apply” can ignore the repository-local “[core] pager” configuration. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11grep: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+13
git grep already runs a repository search unconditionally, even when the --no-index option is supplied; running such a search earlier is not very risky. Just like with shortlog, without this change, the “[pager] grep” configuration is not respected at all. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11shortlog: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+9
shortlog already runs a repository search unconditionally; running such a search earlier is not very risky. Without this change, the “[pager] shortlog” configuration is not respected at all: “git shortlog” unconditionally paginates. The tests are a bit slow. Running the full battery like this for all built-in commands would be counterproductive; the intent is rather to test shortlog as a representative example command using ..._gently(). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-15Merge branch 'jn/paginate-fix'Libravatar Junio C Hamano1-45/+196
* jn/paginate-fix: git --paginate: paginate external commands again git --paginate: do not commit pager choice too early tests: local config file should be honored from subdirs of toplevel t7006: test pager configuration for several git commands t7006 (pager): introduce helper for parameterized tests Conflicts: t/t7006-pager.sh
2010-07-14git --paginate: paginate external commands againLibravatar Jonathan Nieder1-12/+35
73e25e7c (git --paginate: do not commit pager choice too early, 2010-06-26) failed to take some cases into account. 1b. Builtins that do not use RUN_SETUP (like git config) do not find GIT_DIR set correctly when the pager is launched from run_builtin(). So the core.pager configuration is not honored from subdirectories of the toplevel for them. 4a. External git commands (like git request-pull) relied on the early pager launch to take care of handling the -p option. Ever since 73e25e7c, they do not honor the -p option at all. 4b. Commands invoked through ! aliases (like ls) were also relying on the early pager launch. Fix (4a) by launching the pager (if requested) before running such a “dashed external”. For simplicity, this still does not search for a .git directory before running the external command; when run from a subdirectory of the toplevel, therefore, the “[core] pager” configuration is still not honored. Fix (4b) by launching pager if requested before carrying out such an alias. Actually doing this has no effect, since the pager (if any) would have already been launched in a failed attempt to try a dashed external first. The choice-of-pager-not-honored-from- subdirectory bug still applies here, too. (1b) is not a regression. There is no need to fix it yet. Noticed by Junio. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-07Merge branch 'ab/tap'Libravatar Junio C Hamano1-1/+1
* ab/tap: t/README: document more test helpers t/README: proposed rewording... t/README: Document the do's and don'ts of tests t/README: Add a section about skipping tests t/README: Document test_expect_code t/README: Document test_external* t/README: Document the prereq functions, and 3-arg test_* t/README: Typo: paralell -> parallel t/README: The trash is in 't/trash directory.$name' t/t9700/test.pl: don't access private object members, use public access methods t9700: Use Test::More->builder, not $Test::Builder::Test tests: Say "pass" rather than "ok" on empty lines for TAP tests: Skip tests in a way that makes sense under TAP test-lib: output a newline before "ok" under a TAP harness test-lib: Make the test_external_* functions TAP-aware test-lib: Adjust output to be valid TAP format
2010-06-30Merge branch 'jn/grep-open'Libravatar Junio C Hamano1-12/+4
* jn/grep-open: t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script t/t7811-grep-open.sh: ensure fake "less" is made executable t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression grep -O: allow optional argument specifying the pager (or editor) grep: Add the option '--open-files-in-pager' Unify code paths of threaded greps grep: refactor grep_objects loop into its own function Conflicts: t/t7006-pager.sh
2010-06-28git --paginate: do not commit pager choice too earlyLibravatar Nguyễn Thái Ngọc Duy1-12/+46
When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28tests: local config file should be honored from subdirs of toplevelLibravatar Jonathan Nieder1-0/+26
When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. If --paginate is handled before searching for the git dir, this configuration will be missed. In other words, with --paginate and only with --paginate, any repository-local core.pager setting is being ignored [*]. [*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was set explicitly. Add a test to demonstrate this counterintuitive behavior. Noticed while reading over a patch by Duy that fixes it. Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Improved-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28t7006: test pager configuration for several git commandsLibravatar Jonathan Nieder1-52/+84
Test choice of pager at several stages of repository setup. This provides some (admittedly uninteresting) examples to keep in mind when considering changes to the setup procedure. Improved-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28t7006 (pager): introduce helper for parameterized testsLibravatar Jonathan Nieder1-18/+54
The current tests test pager configuration for ‘git log’, but other commands use a different setup procedure and should therefore be tested separately. Add a helper to make this easier. This patch introduces the helper and changes some existing tests to use it. The only functional change should be the introduction of ‘git log - ’ to a few test descriptions. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-1/+1
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-22Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: Update draft release notes to 1.7.1.1 tests: remove unnecessary '^' from 'expr' regular expression Conflicts: diff.c
2010-06-21tests: remove unnecessary '^' from 'expr' regular expressionLibravatar Junio C Hamano1-2/+2
As Brandon noticed, a regular expression match given to 'expr' is already anchored at the beginning. Some versions of expr even complain about this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-13grep: Add the option '--open-files-in-pager'Libravatar Johannes Schindelin1-12/+4
This adds an option to open the matching files in the pager, and if the pager happens to be "less" (or "vi") and there is only one grep pattern, it also jumps to the first match right away. The short option was chose as '-O' to avoid clashes with GNU grep's options (as suggested by Junio). So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)' except that it works also with spaces in file names, and it does not start the pager if there was no matching file. [jn: rebased and added tests; with error handling fix from Junio squashed in] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-02t/t7006: ignore return status of shell's unset builtinLibravatar Brandon Casey1-5/+5
The unset builtin of Solaris's xpg4/sh returns non-zero if it is passed a variable name which was not previously set. Since the unset is not likely to fail, ignore its return status, but add a semicolon as a clue that the '&&' was deliberately left off. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-14t7006: guard cleanup with test_expect_successLibravatar Jonathan Nieder1-48/+101
Most of these tests are removing files, environment variables, and configuration that might interfere outside the test. Putting these clean-up commands in the test (in the same spirit as v1.7.1-rc0~59, 2010-03-20) means that errors during setup will be caught quickly and non-error text will be suppressed without -v. While at it, apply some other minor fixes: - do not rely on the shell to export variables defined with the same command as a function call - avoid whitespace immediately after the > redirection operator, for consistency with the style of other tests Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22tests: Fix race condition in t7006-pagerLibravatar Jonathan Nieder1-6/+6
Pagers that do not consume their input are dangerous: for example, $ GIT_PAGER=: git log $ echo $? 141 $ The only reason these tests were able to work before was that 'git log' would write to the pipe (and not fill it) before the pager had time to terminate and close the pipe. Fix it by using a program that consumes its input, namely wc (as suggested by Johannes). Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-21t7006-pager: if stdout is not a terminal, make a new oneLibravatar Jonathan Nieder1-11/+24
Testing pagination requires (fake or real) access to a terminal so we can see whether the pagination automatically kicks in, which makes it hard to get good coverage when running tests without --verbose. There are a number of ways to work around that: - Replace all isatty calls with calls to a custom xisatty wrapper that usually checks for a terminal but can be overridden for tests. This would be workable, but it would require implementing xisatty separately in three languages (C, shell, and perl) and making sure that any code that is to be tested always uses the wrapper. - Redirect stdout to /dev/tty. This would be problematic because there might be no terminal available, and even if a terminal is available, it might not be appropriate to spew output to it. - Create a new pseudo-terminal on the fly and capture its output. This patch implements the third approach. The new test-terminal.perl helper uses IO::Pty from Expect.pm to create a terminal and executes the program specified by its arguments with that terminal as stdout. If the IO::Pty module is missing or not working on a system, the test script will maintain its old behavior (skipping most of its tests unless GIT_TEST_OPTS includes --verbose). Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20tests: Add tests for automatic use of pagerLibravatar Jonathan Nieder1-0/+163
Git’s automatic pagination support has some subtleties. Add some tests to make sure we don’t break: - when git will use a pager by default; - the effect of the --paginate and --no-pager options; - the effect of pagination on use of color; - how the choice of pager is configured. This does not yet test: - use of pager by scripted commands (git svn and git am); - effect of the pager.* configuration variables; - setting of the LESS variable. Some features involve checking whether stdout is a terminal, so many of these tests are skipped unless output is passed through to the terminal (i.e., unless $GIT_TEST_OPTS includes --verbose). The immediate purpose for these tests was to avoid making things worse after the breakage from my jn/editor-pager series (see commit 376f39, 2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com> for the report. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>