summaryrefslogtreecommitdiff
path: root/t/t7006-pager.sh
AgeCommit message (Collapse)AuthorFilesLines
2010-12-08Merge branch 'jk/pager-per-command'Libravatar Junio C Hamano1-0/+29
* jk/pager-per-command: allow command-specific pagers in pager.<cmd>
2010-11-24Merge branch 'en/and-cascade-tests'Libravatar Junio C Hamano1-5/+5
* en/and-cascade-tests: (25 commits) t4124 (apply --whitespace): use test_might_fail t3404: do not use 'describe' to implement test_cmp_rev t3404 (rebase -i): introduce helper to check position of HEAD t3404 (rebase -i): move comment to description t3404 (rebase -i): unroll test_commit loops t3301 (notes): use test_expect_code for clarity t1400 (update-ref): use test_must_fail t1502 (rev-parse --parseopt): test exit code from "-h" t6022 (renaming merge): chain test commands with && test-lib: introduce test_line_count to measure files tests: add missing &&, batch 2 tests: add missing && Introduce sane_unset and use it to ensure proper && chaining t7800 (difftool): add missing && t7601 (merge-pull-config): add missing && t7001 (mv): add missing && t6016 (rev-list-graph-simplify-history): add missing && t5602 (clone-remote-exec): add missing && t4026 (color): remove unneeded and unchained command t4019 (diff-wserror): add lots of missing && ... Conflicts: t/t7006-pager.sh
2010-11-17allow command-specific pagers in pager.<cmd>Libravatar Jeff King1-0/+29
A user may want different pager settings or even a different pager for various subcommands (e.g., because they use different less settings for "log" vs "diff", or because they have a pager that interprets only log output but not other commands). This patch extends the pager.<cmd> syntax to support not only boolean to-page-or-not-to-page, but also to specify a pager just for a specific command. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-18test_terminal: catch use without TTY prerequisiteLibravatar Jonathan Nieder1-6/+1
It is easy to forget to declare the TTY prerequisite when writing tests on a system where it would always be satisfied (because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16 for example). Automatically detect this problem so there is no need to remember. test_terminal: need to declare TTY prerequisite test_must_fail: command not found: test_terminal echo hi test_terminal returns status 127 in this case to simulate not being available. Also replace the SIMPLEPAGERTTY prerequisite on one test with "SIMPLEPAGER,TTY", since (1) the latter is supported now and (2) the prerequisite detection relies on the TTY prereq being explicitly declared. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-18tests: factor out terminal handling from t7006Libravatar Jeff King1-30/+1
Other tests besides the pager ones may want to check how we handle output to a terminal. This patch makes the code reusable. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Introduce sane_unset and use it to ensure proper && chainingLibravatar Elijah Newren1-5/+5
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-16t7006 (pager): add missing TTY prerequisitesLibravatar Jonathan Nieder1-2/+2
The "git bundle unbundle" and "git config" pagination tests are not supposed to run when stdout is not a terminal and IO::Pty not available to make one on the fly. Reported-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15config: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+8
For the pager choice (and the choice to paginate) to reflect the current repository configuration, the repository needs to be located first. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15bundle: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+33
Without this change, “git -p bundle” does not always respect the repository-local “[core] pager” setting. It is hard to notice because subcommands other than “git bundle unbundle” do not produce much output. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-15apply: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+3
As v1.7.2~16^2 (2010-07-14) explains, without this change, “git --paginate apply” can ignore the repository-local “[core] pager” configuration. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11grep: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+13
git grep already runs a repository search unconditionally, even when the --no-index option is supplied; running such a search earlier is not very risky. Just like with shortlog, without this change, the “[pager] grep” configuration is not respected at all. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11shortlog: run setup_git_directory_gently() soonerLibravatar Nguyễn Thái Ngọc Duy1-0/+9
shortlog already runs a repository search unconditionally; running such a search earlier is not very risky. Without this change, the “[pager] shortlog” configuration is not respected at all: “git shortlog” unconditionally paginates. The tests are a bit slow. Running the full battery like this for all built-in commands would be counterproductive; the intent is rather to test shortlog as a representative example command using ..._gently(). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-15Merge branch 'jn/paginate-fix'Libravatar Junio C Hamano1-45/+196
* jn/paginate-fix: git --paginate: paginate external commands again git --paginate: do not commit pager choice too early tests: local config file should be honored from subdirs of toplevel t7006: test pager configuration for several git commands t7006 (pager): introduce helper for parameterized tests Conflicts: t/t7006-pager.sh
2010-07-14git --paginate: paginate external commands againLibravatar Jonathan Nieder1-12/+35
73e25e7c (git --paginate: do not commit pager choice too early, 2010-06-26) failed to take some cases into account. 1b. Builtins that do not use RUN_SETUP (like git config) do not find GIT_DIR set correctly when the pager is launched from run_builtin(). So the core.pager configuration is not honored from subdirectories of the toplevel for them. 4a. External git commands (like git request-pull) relied on the early pager launch to take care of handling the -p option. Ever since 73e25e7c, they do not honor the -p option at all. 4b. Commands invoked through ! aliases (like ls) were also relying on the early pager launch. Fix (4a) by launching the pager (if requested) before running such a “dashed external”. For simplicity, this still does not search for a .git directory before running the external command; when run from a subdirectory of the toplevel, therefore, the “[core] pager” configuration is still not honored. Fix (4b) by launching pager if requested before carrying out such an alias. Actually doing this has no effect, since the pager (if any) would have already been launched in a failed attempt to try a dashed external first. The choice-of-pager-not-honored-from- subdirectory bug still applies here, too. (1b) is not a regression. There is no need to fix it yet. Noticed by Junio. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-07Merge branch 'ab/tap'Libravatar Junio C Hamano1-1/+1
* ab/tap: t/README: document more test helpers t/README: proposed rewording... t/README: Document the do's and don'ts of tests t/README: Add a section about skipping tests t/README: Document test_expect_code t/README: Document test_external* t/README: Document the prereq functions, and 3-arg test_* t/README: Typo: paralell -> parallel t/README: The trash is in 't/trash directory.$name' t/t9700/test.pl: don't access private object members, use public access methods t9700: Use Test::More->builder, not $Test::Builder::Test tests: Say "pass" rather than "ok" on empty lines for TAP tests: Skip tests in a way that makes sense under TAP test-lib: output a newline before "ok" under a TAP harness test-lib: Make the test_external_* functions TAP-aware test-lib: Adjust output to be valid TAP format
2010-06-30Merge branch 'jn/grep-open'Libravatar Junio C Hamano1-12/+4
* jn/grep-open: t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script t/t7811-grep-open.sh: ensure fake "less" is made executable t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression grep -O: allow optional argument specifying the pager (or editor) grep: Add the option '--open-files-in-pager' Unify code paths of threaded greps grep: refactor grep_objects loop into its own function Conflicts: t/t7006-pager.sh
2010-06-28git --paginate: do not commit pager choice too earlyLibravatar Nguyễn Thái Ngọc Duy1-12/+46
When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28tests: local config file should be honored from subdirs of toplevelLibravatar Jonathan Nieder1-0/+26
When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. If --paginate is handled before searching for the git dir, this configuration will be missed. In other words, with --paginate and only with --paginate, any repository-local core.pager setting is being ignored [*]. [*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was set explicitly. Add a test to demonstrate this counterintuitive behavior. Noticed while reading over a patch by Duy that fixes it. Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Improved-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28t7006: test pager configuration for several git commandsLibravatar Jonathan Nieder1-52/+84
Test choice of pager at several stages of repository setup. This provides some (admittedly uninteresting) examples to keep in mind when considering changes to the setup procedure. Improved-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28t7006 (pager): introduce helper for parameterized testsLibravatar Jonathan Nieder1-18/+54
The current tests test pager configuration for ‘git log’, but other commands use a different setup procedure and should therefore be tested separately. Add a helper to make this easier. This patch introduces the helper and changes some existing tests to use it. The only functional change should be the introduction of ‘git log - ’ to a few test descriptions. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-1/+1
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-22Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: Update draft release notes to 1.7.1.1 tests: remove unnecessary '^' from 'expr' regular expression Conflicts: diff.c
2010-06-21tests: remove unnecessary '^' from 'expr' regular expressionLibravatar Junio C Hamano1-2/+2
As Brandon noticed, a regular expression match given to 'expr' is already anchored at the beginning. Some versions of expr even complain about this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-13grep: Add the option '--open-files-in-pager'Libravatar Johannes Schindelin1-12/+4
This adds an option to open the matching files in the pager, and if the pager happens to be "less" (or "vi") and there is only one grep pattern, it also jumps to the first match right away. The short option was chose as '-O' to avoid clashes with GNU grep's options (as suggested by Junio). So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)' except that it works also with spaces in file names, and it does not start the pager if there was no matching file. [jn: rebased and added tests; with error handling fix from Junio squashed in] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-02t/t7006: ignore return status of shell's unset builtinLibravatar Brandon Casey1-5/+5
The unset builtin of Solaris's xpg4/sh returns non-zero if it is passed a variable name which was not previously set. Since the unset is not likely to fail, ignore its return status, but add a semicolon as a clue that the '&&' was deliberately left off. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-14t7006: guard cleanup with test_expect_successLibravatar Jonathan Nieder1-48/+101
Most of these tests are removing files, environment variables, and configuration that might interfere outside the test. Putting these clean-up commands in the test (in the same spirit as v1.7.1-rc0~59, 2010-03-20) means that errors during setup will be caught quickly and non-error text will be suppressed without -v. While at it, apply some other minor fixes: - do not rely on the shell to export variables defined with the same command as a function call - avoid whitespace immediately after the > redirection operator, for consistency with the style of other tests Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22tests: Fix race condition in t7006-pagerLibravatar Jonathan Nieder1-6/+6
Pagers that do not consume their input are dangerous: for example, $ GIT_PAGER=: git log $ echo $? 141 $ The only reason these tests were able to work before was that 'git log' would write to the pipe (and not fill it) before the pager had time to terminate and close the pipe. Fix it by using a program that consumes its input, namely wc (as suggested by Johannes). Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-21t7006-pager: if stdout is not a terminal, make a new oneLibravatar Jonathan Nieder1-11/+24
Testing pagination requires (fake or real) access to a terminal so we can see whether the pagination automatically kicks in, which makes it hard to get good coverage when running tests without --verbose. There are a number of ways to work around that: - Replace all isatty calls with calls to a custom xisatty wrapper that usually checks for a terminal but can be overridden for tests. This would be workable, but it would require implementing xisatty separately in three languages (C, shell, and perl) and making sure that any code that is to be tested always uses the wrapper. - Redirect stdout to /dev/tty. This would be problematic because there might be no terminal available, and even if a terminal is available, it might not be appropriate to spew output to it. - Create a new pseudo-terminal on the fly and capture its output. This patch implements the third approach. The new test-terminal.perl helper uses IO::Pty from Expect.pm to create a terminal and executes the program specified by its arguments with that terminal as stdout. If the IO::Pty module is missing or not working on a system, the test script will maintain its old behavior (skipping most of its tests unless GIT_TEST_OPTS includes --verbose). Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20tests: Add tests for automatic use of pagerLibravatar Jonathan Nieder1-0/+163
Git’s automatic pagination support has some subtleties. Add some tests to make sure we don’t break: - when git will use a pager by default; - the effect of the --paginate and --no-pager options; - the effect of pagination on use of color; - how the choice of pager is configured. This does not yet test: - use of pager by scripted commands (git svn and git am); - effect of the pager.* configuration variables; - setting of the LESS variable. Some features involve checking whether stdout is a terminal, so many of these tests are skipped unless output is passed through to the terminal (i.e., unless $GIT_TEST_OPTS includes --verbose). The immediate purpose for these tests was to avoid making things worse after the breakage from my jn/editor-pager series (see commit 376f39, 2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com> for the report. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>