| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
|
|
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next couple of commits will change how `git branch` handles
`pager.branch`, similar to how de121ffe5 (tag: respect `pager.tag` in
list-mode only, 2017-08-02) and ff1e72483 (tag: change default of
`pager.tag` to "on", 2017-08-02) changed `git tag`.
Add tests in this area to make sure that we don't regress and so that
the upcoming commits can be made clearer by adapting the tests. Add some
tests for `--list` (implied), one for `--edit-description`, and one for
`--set-upstream-to` as a representative of "something other than the
first two".
In particular, use `test_expect_failure` to document that we currently
respect the pager-configuration with `--edit-description`. The current
behavior is buggy since the pager interferes with the editor and makes
the end result completely broken. See also b3ee740c8 (t7006: add tests
for how git tag paginates, 2017-08-02).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
|
|
When columns are set to automatic for git tag and the output is
paginated by git, the output is a single column instead of multiple
columns.
Standard behaviour in git is to honor auto values when the pager is
active, which happens for example with commands like git log showing
colors when being paged.
Since ff1e72483 (tag: change default of `pager.tag` to "on",
2017-08-02), the pager has been enabled by default, exposing this
problem to more people.
finalize_colopts in column.c only checks whether the output is a TTY to
determine if columns should be enabled with columns set to auto. Also
check if the pager is active.
Adding a test for git column is possible but requires some care to work
around a race on stdin. See commit 18d8c2693 (test_terminal: redirect
child process' stdin to a pty, 2015-08-04). Test git tag instead, since
that does not involve stdin, and since that was the original motivation
for this patch.
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running, e.g., `git -c alias.bar=foo bar`, we expand the alias and
execute `git-foo` as a dashed external. This is true even if git foo is
a builtin. That is on purpose, and is motivated in a comment which was
added in commit 441981bc ("git: simplify environment save/restore
logic", 2016-01-26).
Shortly before we launch a dashed external, and unless we have already
found out whether we should use a pager, we check `pager.foo`. This was
added in commit 92058e4d ("support pager.* for external commands",
2011-08-18). If the dashed external is a builtin, this does not match
that commit's intention and is arguably wrong, since it would be cleaner
if we let the "dashed external builtin" handle `pager.foo`.
This has not mattered in practice, but a recent patch taught `git-tag`
to ignore `pager.tag` under certain circumstances. But, when started
using an alias, it doesn't get the chance to do so, as outlined above.
That recent patch added a test to document this breakage.
Do not check `pager.foo` before launching a builtin as a dashed
external, i.e., if we recognize the name of the external as a builtin.
Change the test to use `test_expect_success`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Since we're about to change how `git tag` respects `pager.tag`, add tests
around this, including how the configuration is ignored if --no-pager or
--paginate are used.
Construct tests with a few different subcommands. First, use -l. Second,
use "no arguments" and --contains, since those imply -l. (There are
more arguments which imply -l, but using these two should be enough.)
Third, use -a as a representative for "not -l". Actually, the tests use
`git tag -am` so no editor is launched, but that is irrelevant, since we
just want to see whether the pager is used or not. Make one of the tests
demonstrate the broken behavior mentioned above, where `git tag -a`
respects `pager.tag`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When expanding aliases, the git_dir is set during the alias expansion
(by virtue of running setup_git_directory_gently()).
This git_dir may be relative to the current working directory, and
indeed often is simply ".git/".
When the alias expands to a shell command, we restore the original
working directory, though, yet we do not reset git_dir.
As a consequence, subsequent read_early_config() runs will mistake the
git_dir to be populated properly and not find the correct config.
Demonstrate this problem by adding a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of the test case "git -p - core.pager is not used from
subdirectory" was to verify that the setup_git_directory() function had
not been called just to obtain the core.pager setting.
However, we are about to fix the early config machinery so that it
*does* work, without messing up the global state.
Once that is done, the core.pager setting *will* be used, even when
running from a subdirectory, and that is a Good Thing.
The intention of that test case, however, was to verify that the
setup_git_directory() function has not run, because it changes global
state such as the current working directory.
To keep that spirit, but fix the incorrect assumption, this patch
replaces that test case by a new one that verifies that the pager is
run in the subdirectory, i.e. that the current working directory has
not been changed at the time the pager is configured and launched, even
if the `rev-parse` command requires a .git/ directory and *will* change
the working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allowing PAGER_ENV to be set at build-time allows us to move
pager-specific knowledge out of our build. This allows us to
set a better default for FreeBSD more(1), which pretends not to
understand ANSI color escapes if the MORE environment variable
is left empty, but accepts the same variables as less(1)
Originally-from:
https://public-inbox.org/git/xmqq61piw4yf.fsf@gitster.dls.corp.google.com/
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
|
|
When we are running the git command "foo", we may have to
look up the config keys "pager.foo" and "alias.foo". These
config schemes are mis-designed, as the command names can be
anything, but the config syntax has some restrictions. For
example:
$ git foo_bar
error: invalid key: pager.foo_bar
error: invalid key: alias.foo_bar
git: 'foo_bar' is not a git command. See 'git --help'.
You cannot name an alias with an underscore. And if you have
an external command with one, you cannot configure its
pager.
In the long run, we may develop a different config scheme
for these features. But in the near term (and because we'll
need to support the existing scheme indefinitely), we should
at least squelch the error messages shown above.
These errors come from git_config_parse_key. Ideally we
would pass a "quiet" flag to the config machinery, but there
are many layers between the pager code and the key parsing.
Passing a flag through all of those would be an invasive
change.
Instead, let's provide a config function to report on
whether a key is syntactically valid, and have the pager and
alias code skip lookup for bogus keys. We can build this
easily around the existing git_config_parse_key, with two
minor modifications:
1. We now handle a NULL store_key, to validate but not
write out the normalized key.
2. We accept a "quiet" flag to avoid writing to stderr.
This doesn't need to be a full-blown public "flags"
field, because we can make the existing implementation
a static helper function, keeping the mess contained
inside config.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise there is a race: if 'git log' finishes writing before the
pager terminates and closes the pipe, all is well, and if the pager
finishes quickly enough then 'git log' terminates with SIGPIPE.
died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33.
not ok 6 - LESS and LV envvars are set for pagination
Noticed on Ubuntu PPA builders, where the race was lost about half the
time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager,
2010-02-22).
Reported-by: Anders Kaseorg <andersk@MIT.EDU>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
$ git diff
^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m
^[[1mindex aa4f0b2..17e113e 100644^[[m
^[[1m--- a/.mailfilter^[[m
^[[1m+++ b/.mailfilter^[[m
^[[36m@@ -1,11 +1,58 @@^[[m
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script uses the following idiom to start each test in a known
good state:
test_expect_success 'some commands use a pager' '
rm -f paginated.out || cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
where "cleanup_fail" is a function that prints an error message and
errors out.
That is bogus on three levels:
- Cleanup commands like "rm -f" and "test_unconfig" are designed not
to fail, so this logic would never trip.
- If they were to malfunction anyway, it is not useful to set apart
cleanup commands as a special kind of failure with a special error
message. Whichever command fails, the next step is to investigate
which command that was, for example by running tests with
"prove -e 'sh -x'", and fix it.
- Relying on left-associativity of mixed &&/|| lists makes the code
somewhat cryptic.
The fix is simple: drop the "|| cleanup_fail" in each test and the
definition of the "cleanup_fail" function so no new callers can arise.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this patch, any commands that are not builtin would
not respect pager.* config. For example:
git config pager.stash false
git stash list
would still use a pager. With this patch, pager.stash now
has an effect. If it is not specified, we will still fall
back to pager.log when we invoke "log" from "stash list".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have always set a global "spawned_pager" variable when we
start the pager. This lets us make the auto-color decision
later in the program as as "we are outputting to a terminal,
or to a pager which can handle colors".
Commit 6e9af86 added support for the GIT_PAGER_IN_USE
environment variable. An external program calling git (e.g.,
git-svn) could set this variable to indicate that it had
already started the pager, and that the decision about
auto-coloring should take that into account.
However, 6e9af86 failed to do the reverse, which is to tell
external programs when git itself has started the pager.
Thus a git command implemented as an external script that
has the pager turned on (e.g., "git -p stash show") would
not realize it was going to a pager, and would suppress
colors.
This patch remedies that; we always set GIT_PAGER_IN_USE
when we start the pager, and the value is respected by both
this program and any spawned children.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, this is just making the test script a little
shorter and easier to read. However, there are several
places where we didn't take proper precautions against
polluting downstream tests with our config; this fixes them,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests break &&-chaining to deal with broken "unset"
implementations. Instead, they should just use sane_unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/pager-per-command:
allow command-specific pagers in pager.<cmd>
|
|
* en/and-cascade-tests: (25 commits)
t4124 (apply --whitespace): use test_might_fail
t3404: do not use 'describe' to implement test_cmp_rev
t3404 (rebase -i): introduce helper to check position of HEAD
t3404 (rebase -i): move comment to description
t3404 (rebase -i): unroll test_commit loops
t3301 (notes): use test_expect_code for clarity
t1400 (update-ref): use test_must_fail
t1502 (rev-parse --parseopt): test exit code from "-h"
t6022 (renaming merge): chain test commands with &&
test-lib: introduce test_line_count to measure files
tests: add missing &&, batch 2
tests: add missing &&
Introduce sane_unset and use it to ensure proper && chaining
t7800 (difftool): add missing &&
t7601 (merge-pull-config): add missing &&
t7001 (mv): add missing &&
t6016 (rev-list-graph-simplify-history): add missing &&
t5602 (clone-remote-exec): add missing &&
t4026 (color): remove unneeded and unchained command
t4019 (diff-wserror): add lots of missing &&
...
Conflicts:
t/t7006-pager.sh
|
|
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git bundle unbundle" and "git config" pagination tests are not
supposed to run when stdout is not a terminal and IO::Pty not available
to make one on the fly.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git grep already runs a repository search unconditionally,
even when the --no-index option is supplied; running such a
search earlier is not very risky.
Just like with shortlog, without this change, the
“[pager] grep” configuration is not respected at all.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
shortlog already runs a repository search unconditionally;
running such a search earlier is not very risky.
Without this change, the “[pager] shortlog” configuration
is not respected at all: “git shortlog” unconditionally paginates.
The tests are a bit slow. Running the full battery like this
for all built-in commands would be counterproductive; the intent is
rather to test shortlog as a representative example command using
..._gently().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
|
|
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/tap:
t/README: document more test helpers
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
t/t9700/test.pl: don't access private object members, use public access methods
t9700: Use Test::More->builder, not $Test::Builder::Test
tests: Say "pass" rather than "ok" on empty lines for TAP
tests: Skip tests in a way that makes sense under TAP
test-lib: output a newline before "ok" under a TAP harness
test-lib: Make the test_external_* functions TAP-aware
test-lib: Adjust output to be valid TAP format
|
|
* jn/grep-open:
t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script
t/t7811-grep-open.sh: ensure fake "less" is made executable
t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression
grep -O: allow optional argument specifying the pager (or editor)
grep: Add the option '--open-files-in-pager'
Unify code paths of threaded greps
grep: refactor grep_objects loop into its own function
Conflicts:
t/t7006-pager.sh
|
|
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration. If --paginate is handled before searching for the
git dir, this configuration will be missed.
In other words, with --paginate and only with --paginate, any
repository-local core.pager setting is being ignored [*].
[*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was
set explicitly.
Add a test to demonstrate this counterintuitive behavior. Noticed
while reading over a patch by Duy that fixes it.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test choice of pager at several stages of repository setup. This
provides some (admittedly uninteresting) examples to keep in mind when
considering changes to the setup procedure.
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current tests test pager configuration for ‘git log’, but other
commands use a different setup procedure and should therefore be
tested separately. Add a helper to make this easier.
This patch introduces the helper and changes some existing tests to
use it. The only functional change should be the introduction of ‘git
log - ’ to a few test descriptions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Martin Ågren
Kevin Daudt
Jeff King
Johannes Schindelin
Eric Wong
Elia Pinto
David Tran
Jonathan Nieder
Elijah Newren
Nguyễn Thái Ngọc Duy