| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
|
|
The ort merge backend has been optimized by skipping irrelevant
renames.
* en/ort-perf-batch-9:
diffcore-rename: avoid doing basename comparisons for irrelevant sources
merge-ort: skip rename detection entirely if possible
merge-ort: use relevant_sources to filter possible rename sources
merge-ort: precompute whether directory rename detection is needed
merge-ort: introduce wrappers for alternate tree traversal
merge-ort: add data structures for an alternate tree traversal
merge-ort: precompute subset of sources for which we need rename detection
diffcore-rename: enable filtering possible rename sources
|
|
When we started on merge-ort, thousands of tests failed when run with
the GIT_TEST_MERGE_ALGORITHM=ort flag; with so many, it didn't make
sense to flip all their test expectations. The ones in t6409, t6418,
and the submodule tests are being handled by an independent in-flight
topic ("Complete merge-ort implemenation...almost"). The ones in
t6423 were left out of the other series because other ongoing series
that this commit depends upon were addressing those. Now that we only
have one remaining test failure in t6423, let's mark it as such.
This remaining test will be fixed by a future optimization series, but
since merge-recursive doesn't pass this test either, passing it is not
necessary for declaring merge-ort ready for general use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rename detection works by trying to pair all file deletions (or
"sources") with all file additions (or "destinations"), checking
similarity, and then marking the sufficiently similar ones as renames.
This can be expensive if there are many sources and destinations on a
given side of history as it results in an N x M comparison matrix.
However, there are many cases where we can compute in advance that
detecting renames for some of the sources provides no useful information
and thus that we can exclude those sources from the matrix.
To see why, first note that the merge machinery uses detected renames in
two ways:
* directory rename detection: when one side of history renames a
directory, and the other side of history adds new files to that
directory, we want to be able to warn the user about the need to
chose whether those new files stay in the old directory or move
to the new one.
* three-way content merging: in order to do three-way content merging
of files, we need three different file versions. If one side of
history renamed a file, then some of the content for the file is
found under a different path than in the merge base or on the
other side of history.
Add a simple testcase showing the two kinds of reasons renames are
relevant; it's a testcase that will only pass if we detect both kinds of
needed renames.
Other than the testcase added above, this commit concentrates just on
the three-way content merging; it will punt and mark all sources as
needed for directory rename detection, and leave it to future commits to
narrow that down more.
The point of three-way content merging is to reconcile changes made on
*both* sides of history. What if the file wasn't modified on both
sides? There are two possibilities:
* If it wasn't modified on the renamed side:
-> then we get to do exact rename detection, which is cheap.
* If it wasn't modified on the unrenamed side:
-> then detection of a rename for that source file is irrelevant
That latter claim might be surprising at first, so let's walk through a
case to show why rename detection for that source file is irrelevant.
Let's use two filenames, old.c & new.c, with the following abbreviated
object ids (and where the value '000000' is used to denote that the file
is missing in that commit):
old.c new.c
MERGE_BASE: 01d01d 000000
MERGE_SIDE1: 01d01d 000000
MERGE_SIDE2: 000000 5e1ec7
If the rename *isn't* detected:
then old.c looks like it was unmodified on one side and deleted on
the other and should thus be removed. new.c looks like a new file we
should keep as-is.
If the rename *is* detected:
then a three-way content merge is done. Since the version of the
file in MERGE_BASE and MERGE_SIDE1 are identical, the three-way merge
will produce exactly the version of the file whose abbreviated
object id is 5e1ec7. It will record that file at the path new.c,
while removing old.c from the directory.
Note that these two results are identical -- a single file named 'new.c'
with object id 5e1ec7. In other words, it doesn't matter if the rename
is detected in the case where the file is unmodified on the unrenamed
side.
Use this information to compute whether we need rename detection for
each source created in add_pair().
It's probably worth noting that there used to be a few other edge or
corner cases besides three-way content merges and directory rename
detection where lack of rename detection could have affected the result,
but those cases actually highlighted where conflict resolution methods
were not consistent with each other. Fixing those inconsistencies were
thus critically important to enabling this optimization. That work
involved the following:
* bringing consistency to add/add, rename/add, and rename/rename
conflict types, as done back in the topic merged at commit
ac193e0e0a ("Merge branch 'en/merge-path-collision'", 2019-01-04),
and further extended in commits 2a7c16c980 ("t6422, t6426: be more
flexible for add/add conflicts involving renames", 2020-08-10) and
e8eb99d4a6 ("t642[23]: be more flexible for add/add conflicts
involving pair renames", 2020-08-10)
* making rename/delete more consistent with modify/delete
as done in commits 1f3c9ba707 ("t6425: be more flexible with
rename/delete conflict messages", 2020-08-10) and 727c75b23f
("t6404, t6423: expect improved rename/delete handling in ort
backend", 2020-10-26)
Since the set of relevant_sources we compute has not yet been narrowed
down for directory rename detection, we do not pass it to
diffcore_rename_extended() yet. That will be done after subsequent
commits narrow down the list of relevant_sources needed for directory
rename detection reasons.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove those uses of the now
always true C_LOCALE_OUTPUT prerequisite from those tests which
declare it as an argument to test_expect_{success,failure}.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the previous commit, since the "recursive" backend relies on
unpack_trees() to check if unstaged or untracked files would be
overwritten by a merge, and unpack_trees() does not understand renames
-- it has false positives and false negatives. Once it has run, since
it updates as it goes, merge-recursive then has to handle completing the
merge as best it can despite extra changes in the working copy.
However, this is not just an issue for dirty files, but also for
untracked files because directory renames can cause file contents to
need to be written to a location that was not tracked on either side of
history.
Since the "ort" backend does the complete merge inmemory, and only
updates the index and working copy as a post-processing step, if there
are untracked files in the way it can simply abort the merge much like
checkout does.
Update t6423 to reflect the better merge abilities and expectations for
ort, while still leaving the best-case-as-good-as-recursive-can-do
expectations there for the recursive backend so we retain its stability
until we are ready to deprecate and remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "recursive" backend relies on unpack_trees() to check if unstaged
changes would be overwritten by a merge, but unpack_trees() does not
understand renames -- and once it returns, it has already written many
updates to the working tree and index. As such, "recursive" had to do a
special 4-way merge where it would need to also treat the working copy
as an extra source of differences that we had to carefully avoid
overwriting and resulting in moving files to new locations to avoid
conflicts.
The "ort" backend, by contrast, does the complete merge inmemory, and
only updates the index and working copy as a post-processing step. If
there are dirty files in the way, it can simply abort the merge.
Update t6423 and t6436 to reflect the better merge abilities and
expectations we have for ort, while still leaving the
best-case-as-good-as-recursive-can-do expectations there for the
recursive backend so we retain its stability until we are ready to
deprecate and remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conflict markers carry an extra annotation of the form
REF-OR-COMMIT:FILENAME
to help distinguish where the content is coming from, with the :FILENAME
piece being left off if it is the same for both sides of history (thus
only renames with content conflicts carry that part of the annotation).
However, there were cases where the :FILENAME annotation was
accidentally left off, due to merge-recursive's
every-codepath-needs-a-copy-of-all-special-case-code format.
Update a few tests to have the correct :FILENAME extension on relevant
paths with the ort backend, while leaving the expectation for
merge-recursive the same to avoid destabilizing it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a file is renamed and has content conflicts, merge-recursive does
not have some stages for the old filename and some stages for the new
filename in the index; instead it copies all the stages corresponding to
the old filename over to the corresponding locations for the new
filename, so that there are three higher order stages all corresponding
to the new filename. Doing things this way makes it easier for the user
to access the different versions and to resolve the conflict (no need to
manually 'git rm' the old version as well as 'git add' the new one).
rename/deletes should be handled similarly -- there should be two stages
for the renamed file rather than just one. We do not want to
destabilize merge-recursive right now, so instead update relevant tests
to have different expectations depending on whether the "recursive" or
"ort" merge strategies are in use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge-recursive.c is built on the idea of running unpack_trees() and
then "doing minor touch-ups" to get the result. Unfortunately,
unpack_trees() was run in an update-as-it-goes mode, leading
merge-recursive.c to follow suit and end up with an immediate evaluation
and fix-it-up-as-you-go design. Some things like directory/file
conflicts are not well representable in the index data structure, and
required special extra code to handle. But then when it was discovered
that rename/delete conflicts could also be involved in directory/file
conflicts, the special directory/file conflict handling code had to be
copied to the rename/delete codepath. ...and then it had to be copied
for modify/delete, and for rename/rename(1to2) conflicts, ...and yet it
still missed some. Further, when it was discovered that there were also
file/submodule conflicts and submodule/directory conflicts, we needed to
copy the special submodule handling code to all the special cases
throughout the codebase.
And then it was discovered that our handling of directory/file conflicts
was suboptimal because it would create untracked files to store the
contents of the conflicting file, which would not be cleaned up if
someone were to run a 'git merge --abort' or 'git rebase --abort'. It
was also difficult or scary to try to add or remove the index entries
corresponding to these files given the directory/file conflict in the
index. But changing merge-recursive.c to handle these correctly was a
royal pain because there were so many sites in the code with similar but
not identical code for handling directory/file/submodule conflicts that
would all need to be updated.
I have worked hard to push all directory/file/submodule conflict
handling in merge-ort through a single codepath, and avoid creating
untracked files for storing tracked content (it does record things at
alternate paths, but makes sure they have higher-order stages in the
index).
Since updating merge-recursive is too much work and we don't want to
destabilize it, instead update the testsuite to have different
expectations for relevant directory/file/submodule conflict tests.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a number of tests that the "recursive" backend does not handle
correctly but which the redesign in "ort" will. Add a new helper in
lib-merge.sh for selecting a different test expectation based on the
setting of GIT_TEST_MERGE_ALGORITHM, and use it in various testcases to
document which ones we expect to fail under recursive but pass under
ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Testcases 12b and 12c were both slightly weird; they were marked as
having a weird resolution, but with the note that even straightforward
simple rules can give weird results when the input is bizarre.
However, during optimization work for merge-ort, I discovered a
significant speedup that is possible if we add one more fairly
straightforward rule: we don't bother doing directory rename detection
if there are no new files added to the directory on the other side of
the history to be affected by the directory rename. This seems like an
obvious and straightforward rule, but there was one funny corner case
where directory rename detection could affect only existing files: the
funny corner case where two directories are renamed into each other on
opposite sides of history. In other words, it only results in a
different output for testcases 12b and 12c.
Since we already thought testcases 12b and 12c were weird anyway, and
because the optimization often has a significant effect on common cases
(but is entirely prevented if we can't change how 12b and 12c function),
let's add the additional rule and tweak how 12b and 12c work. Split
both testcases into two (one where we add no new files, and one where
the side that doesn't rename a given directory will add files to it),
and mark them with the new expectation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While investigating the issues highlighted by the testcase in the
previous patch, I also found a shortcoming in the directory rename
detection rules. Split testcase 6b into two to explain this issue
and update directory-rename-detection.txt to remove one of the previous
rules that I know believe to be detrimental. Also, update the wording
around testcase 8e; while we are not modifying the results of that
testcase, we were previously unsure of the appropriate resolution of
that test and the new rule makes the previously chosen resolution for
that testcase a bit more solid.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new testcase modelled on a real world repository example that
served multiple purposes:
* it uncovered a bug in the current directory rename detection
implementation.
* it is a good test of needing to do directory rename detection for
a series of commits instead of just one (and uses rebase instead
of just merge like all the other tests in this testfile).
* it is an excellent stress test for some of the optimizations in
my new merge-ort engine
I can expand on the final item later when I have submitted more of
merge-ort, but the bug is the main immediate concern. It arises as
follows:
* dir/subdir/ has several files
* almost all files in dir/subdir/ are renamed to folder/subdir/
* one of the files in dir/subdir/ is renamed to folder/subdir/newsubdir/
* If the other side of history (that doesn't do the renames) adds a
new file to dir/subdir/, where should it be placed after the merge?
The most obvious two choices are: (1) leave the new file in dir/subdir/,
don't make it follow the rename, and (2) move the new file to
folder/subdir/, following the rename of most the files. However,
there's a possible third choice here: (3) move the new file to
folder/subdir/newsubdir/. The choice reinforce the fact that
merge.directoryRenames=conflict is a good default, but when the merge
machinery needs to stick it somewhere and notify the user of the
possibility that they might want to place it elsewhere. Surprisingly,
the current code would always choose (3), while the real world
repository was clearly expecting (2) -- move the file along with where
the herd of files was going, not with the special exception.
The problem here is that for the majority of the file renames,
dir/subdir/ -> folder/subdir/
is actually represented as
dir/ -> folder/
This directory rename would have a big weight associated with it since
most the files followed that rename. However, we always consult the
most immediate directory first, and there is only one rename rule for
it:
dir/subdir/ -> folder/subdir/newsubdir/
Since this rule is the only one for mapping from dir/subdir/, it
automatically wins and that directory rename was followed instead of the
desired dir/subdir/ -> folder/subdir/.
Unfortunately, the fix is a bit involved so for now just add the
testcase documenting the issue.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Much like the last commit accepted 'add/add' and 'rename/add'
interchangably, we also want to do the same for 'add/add' and
'rename/rename'. This also allows us to avoid the ambiguity in meaning
with 'rename/rename' (is it two separate files renamed to the same
location, or one file renamed on both sides but differently)?
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I had long since forgotten the idea behind this test and why it failed,
and took a little while to figure it out. To prevent others from having
to spend a similar time on it, add an explanation in the comments.
However, the reasoning in the explanation makes me question why I
considered it a failure at all. I'm not sure if I had a better reason
when I originally wrote it, but for now just add commentary about the
possible expectations and why it behaves the way it does right now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit da1e295e00 ("t604[236]: do not run setup in separate tests",
2019-10-22) removed approximately half the tests (which were setup-only
tests) in t6043 by turning them into functions that the subsequent test
would call as their first step. This ensured that any test from this
file could be run entirely independently of all the other tests in the
file. Unfortunately, the call to the new setup function was missed in
two of the test_expect_failure cases. Add them in.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests for the merge machinery are spread over several places.
Collect them into t64xx for simplicity. Some notes:
t60[234]*.sh:
Merge tests started in t602*, overgrew bisect and remote tracking
tests in t6030, t6040, and t6041, and nearly overtook replace tests
in t6050. This made picking out relevant tests that I wanted to run
in a tighter loop slightly more annoying for years.
t303*.sh:
These started out as tests for the 'merge-recursive' toplevel command,
but did not restrict to that and had lots of overlap with the
underlying merge machinery.
t7405, t7613:
submodule-specific merge logic started out in submodule.c but was
moved to merge-recursive.c in commit 18cfc08866 ("submodule.c: move
submodule merging to merge-recursive.c", 2018-05-15). Since these
tests are about the logic found in the merge machinery, moving these
tests to be with the merge tests makes sense.
t7607, t7609:
Having tests spread all over the place makes it more likely that
additional tests related to a certain piece of logic grow in all those
other places. Much like t303*.sh, these two tests were about the
underlying merge machinery rather than outer levels.
Tests that were NOT moved:
t76[01]*.sh:
Other than the four tests mentioned above, the remaining tests in
t76[01]*.sh are related to non-recursive merge strategies, parameter
parsing, and other stuff associated with the highlevel builtin/merge.c
rather than the recursive merge machinery.
t3[45]*.sh:
The rebase testcases in t34*.sh also test the merge logic pretty
heavily; sometimes changes I make only trigger failures in the rebase
tests. The rebase tests are already nicely coupled together, though,
and I didn't want to mess that up. Similar comments apply for the
cherry-pick tests in t35*.sh.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Ævar Arnfjörð Bjarmason