| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When 'git name-rev' is invoked with commit-ish parameters, it tries to
save some work, and doesn't visit commits older than the committer
date of the oldest given commit minus a one day worth of slop. Since
our 'timestamp_t' is an unsigned type, this leads to a timestamp
underflow when the committer date of the oldest given commit is within
a day of the UNIX epoch. As a result the cutoff timestamp ends up
far-far in the future, and 'git name-rev' doesn't visit any commits,
and names each given commit as 'undefined'.
Check whether subtracting the slop from the oldest committer date
would lead to an underflow, and use no cutoff in that case. We don't
have a TIME_MIN constant, dddbad728c (timestamp_t: a new data type for
timestamps, 2017-04-26) didn't add one, so do it now.
Note that the type of the cutoff timestamp variable used to be signed
before 5589e87fd8 (name-rev: change a "long" variable to timestamp_t,
2017-05-20). The behavior was still the same even back then, but the
underflow didn't happen when substracting the slop from the oldest
committer date, but when comparing the signed cutoff timestamp with
unsigned committer dates in name_rev(). IOW, this underflow bug is as
old as 'git name-rev' itself.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix widely supported but non-POSIX basic regex syntax introduced in
[1] and [2]. On GNU, NetBSD and FreeBSD the following works:
$ echo xy >f
$ grep 'xy\?' f; echo $?
xy
0
The same goes for "\+". The "?" and "+" syntax is not in the BRE
syntax, just in ERE, but on some implementations it can be invoked by
prefixing the meta-operator with "\", but not on OpenBSD:
$ uname -a
OpenBSD obsd.my.domain 6.2 GENERIC#132 amd64
$ grep --version
grep version 0.9
$ grep 'xy\?' f; echo $?
1
Let's fix this by moving to ERE syntax instead, where "?" and "+" are
universally supported:
$ grep -E 'xy?' f; echo $?
xy
0
1. 2ed5c8e174 ("describe: setup working tree for --dirty", 2019-02-03)
2. c801170b0c ("t6120: test for describe with a bare repository",
2019-02-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
|
|
This ensures that nothing breaks the basic functionality of describe for
bare repositories. Please note that --broken and --dirty need a working
tree.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't use NEED_WORK_TREE when running the git-describe builtin,
since you should be able to describe a commit even in a bare repository.
However, the --dirty flag does need a working tree. Since we don't call
setup_work_tree(), it uses whatever directory we happen to be in. That's
unlikely to match our index, meaning we'd say "dirty" even when the real
working tree is clean.
We can fix that by calling setup_work_tree() once we know that the user
has asked for --dirty.
The --broken option also needs a working tree. But because its
implementation calls git-diff-index we don‘t have to setup the working
tree in the git-describe process.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe $garbage" stopped giving any errors when the garbage
happens to be a string with 40 hexadecimal letters.
* sb/describe-blob:
describe: confirm that blobs actually exist
|
|
Prior to 644eb60bd0 (builtin/describe.c: describe a blob,
2017-11-15), we noticed and complained about missing
objects, since they were not valid commits:
$ git describe 0000000000000000000000000000000000000000
fatal: 0000000000000000000000000000000000000000 is not a valid 'commit' object
After that commit, we feed any non-commit to lookup_blob(),
and complain only if it returns NULL. But the lookup_*
functions do not actually look at the on-disk object
database at all. They return an entry from the in-memory
object hash if present (and if it matches the requested
type), and otherwise auto-create a "struct object" of the
requested type.
A missing object would hit that latter case: we create a
bogus blob struct, walk all of history looking for it, and
then exit successfully having produced no output.
One reason nobody may have noticed this is that some related
cases do still work OK:
1. If we ask for a tree by sha1, then the call to
lookup_commit_referecne_gently() would have parsed it,
and we would have its true type in the in-memory object
hash.
2. If we ask for a name that doesn't exist but isn't a
40-hex sha1, then get_oid() would complain before we
even look at the objects at all.
We can fix this by replacing the lookup_blob() call with a
check of the true type via sha1_object_info(). This is not
quite as efficient as we could possibly make this check. We
know in most cases that the object was already parsed in the
earlier commit lookup, so we could call lookup_object(),
which does auto-create, and check the resulting struct's
type (or NULL). However it's not worth the fragility nor
code complexity to save a single object lookup.
The new tests cover this case, as well as that of a
tree-by-sha1 (which does work as described above, but was
not explicitly tested).
Noticed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
|
|
The man page of the "git describe" command explains the expected
output when using the --all option, i.e. the full reference path is
shown, including heads/ or tags/ prefix.
When 212945d4a85dfa172ea55ec73b1d830ef2d8582f ("Teach git-describe
to verify annotated tag names before output") made Git favor the
embedded name of annotated tags, it accidentally changed the output
format when the --all flag is given, only printing the tag's name
without the prefix.
Check if --all was specified and re-add the "tags/" prefix for this
special case to fix the regresssion.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
git describe --tags v0.99:Makefile
conversion-901-g7672db20c2:Makefile
tells us the Makefile as it was in v0.99 was introduced in commit 7672db20.
The walking is performed in reverse order to show the introduction of a
blob rather than its last occurrence.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe --match <pattern>" has been taught to play well with
the "--all" option.
* mk/describe-match-with-all:
describe: teach --match to handle branches and remotes
|
|
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
|
|
When `git describe` uses `--match`, it matches only tags, basically
ignoring the `--all` argument even when it is specified.
Fix it by also matching branch name and $remote_name/$remote_branch_name,
for remote-tracking references, with the specified patterns. Update
documentation accordingly and add tests.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
|
|
`git describe --match` with multiple patterns matches only first pattern.
If it fails, next patterns are not tried.
Fix it, add test cases and update existing test which has wrong
expectation.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On cygwin (and MinGW), the 'ulimit' built-in bash command does not have
the desired effect of limiting the resources of new processes, at least
for the stack and file descriptors. However, it always returns success
and leads to several test prerequisites being erroneously set to true.
Add a check for cygwin and MinGW to the prerequisite expressions, using
a 'test_have_prereq !MINGW,!CYGWIN' clause, to guard against using ulimit.
This affects the prerequisite expressions for the ULIMIT_STACK_SIZE,
CMDLINE_LIMIT and ULIMIT_FILE_DESCRIPTORS prerequisites.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on the implementation of walks, limitted stack size may lead
to problems (for recursion).
Test name-rev and describe with deep repos and limitted stack size and
mark the former with known failure.
We add these tests (which add gazillions of commits) last so as to keep
the runtime of other subtests the same.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6120 breaks the repo state intentionally in the last tests.
Clean up the breakage afterwards (and before adding more tests).
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
name-rev is used in a few tests, but tested only in t6120 along with
describe so far.
Add tests for name-rev with --all and --stdin.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-describe tells you the version number you're at, or errors out, e.g.
when you run it outside of a repository, which may happen when downloading
a tar ball instead of using git to obtain the source code.
To keep this property of only erroring out, when not in a repository,
severe (submodule) errors must be downgraded to reporting them gently
instead of having git-describe error out completely.
To achieve that a flag '--broken' is introduced, which is in the same
vein as '--dirty' but uses an actual child process to check for dirtiness.
When that child dies unexpectedly, we'll append '-broken' instead of
'-dirty'.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-describe the `--exclude` option which will allow specifying
a glob pattern of tags to ignore. This can be combined with the
`--match` patterns to enable more flexibility in determining which tags
to consider.
For example, suppose you wish to find the first official release tag
that contains a certain commit. If we assume that official release tags
are of the form "v*" and pre-release candidates include "*rc*" in their
name, we can now find the first release tag that introduces the commit
abcdef:
git describe --contains --match="v*" --exclude="*rc*" abcdef
Add documentation, tests, and completion for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `--match` to be accepted multiple times, accumulating a list of
patterns to match into a string list. Each pattern is inclusive, such
that a tag need only match one of the provided patterns to be
considered for matching.
This extension is useful as it enables more flexibility in what tags
match, and may avoid the need to run the describe command multiple
times to get the same result.
Add tests and update the documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git describe --contains' doesn't default to HEAD when no commit is
given, and it doesn't produce any output, not even an error:
~/src/git ((v2.5.0))$ ./git describe --contains
~/src/git ((v2.5.0))$ ./git describe --contains HEAD
v2.5.0^0
Unlike other 'git describe' options, the '--contains' code path is
implemented by calling 'name-rev' with a bunch of options plus all the
commit-ishes that were passed to 'git describe'. If no commit-ish was
present, then 'name-rev' got invoked with none, which then leads to the
behavior illustrated above.
Porcelain commands usually default to HEAD when no commit-ish is given,
and 'git describe' already does so in all other cases, so it should do
so with '--contains' as well.
Pass HEAD to 'name-rev' when no commit-ish is given on the command line
to make '--contains' behave consistently with other 'git describe'
options. While at it, use argv_array_pushv() instead of the loop to
pass commit-ishes to 'git name-rev'.
'git describe's short help already indicates that the commit-ish is
optional, but the synopsis in the man page doesn't, so update it
accordingly as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe" takes a commit and gives it a name based on tags in
its neighbourhood. The command does take a commit-ish but when
given a tag that points at a commit, it should dereference the tag
before computing the name for the commit.
As the whole processing is internally delegated to name-rev, if we
unwrap tags down to the underlying commit when invoking name-rev, it
will make the name-rev issue an error message based on the unwrapped
object name (i.e. either 40-hex object name, or "$tag^0") that is
different from what the end-user gave to the command when the commit
cannot be described. Introduce an internal option --peel-tag to the
name-rev to tell it to unwrap a tag in its input from the command
line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git name-rev --stdin" has been fixed to convert an object name that
points at a tag to a refname of the tag. The codepath to handle its
command line arguments, however, fed the commit that the tag points
at to the underlying naming machinery.
With this fix, you will get this:
$ git name-rev --refs=tags/\* --name-only $(git rev-parse v1.8.3 v1.8.3^0)
v1.8.3
v1.8.3^0
which is the same as what you would get from the fixed "--stdin" variant:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --refs=tags/\* --name-only
v1.8.3
v1.8.3^0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only consider the first parent commit when walking the commit history. This
is useful if you only wish to match tags on your branch after a merge.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7012 and t7060
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If more than one annotated tag points at the same commit, use the
tag whose tagger field has a more recent date stamp. This resolves
non-deterministic cases where the maintainer has done:
$ git tag -a -m "2.1-rc1" v2.1-rc1 deadbeef
$ git tag -a -m "2.1" v2.1 deadbeef
If the tag is an older-style annotated tag with no tagger date, we
assume a date stamp at the UNIX epoch. This will cause us to prefer
an annotated tag that has a valid date.
We could also try to consider the tag object chain, favoring a tag
that "includes" another one:
$ git tag -a -m "2.1-rc0" v2.1-rc1 deadbeef
$ git tag -a -m "2.1" v2.1 v2.1-rc1
However traversing the tag's object chain looking for inclusion
is much more complicated. Its already very likely that even in
these cases the v2.1 tag will have a more recent tagger date than
v2.1-rc1, so with this change describe should still resolve this
by selecting the more recent v2.1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
4d23660 (describe: when failing, tell the user about options that
work, 2009-10-28) forgot to update the shortcut path where the code
detected and used a possible exact match. This means that an
unannotated tag on HEAD would be used by 'git describe'.
Guard this code path against the new circumstances, where unannotated
tags can be present in ->util even if we're not actually planning to
use them.
While there, also add some tests for --all.
Reported by 'yashi' on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jp/dirty-describe:
Teach "git describe" --dirty option
|
|
With the --dirty option, git describe works on HEAD but append s"-dirty"
iff the contents of the work tree differs from HEAD. E.g.
$ git describe --dirty
v1.6.5-15-gc274db7
$ echo >> Makefile
$ git describe --dirty
v1.6.5-15-gc274db7-dirty
The --dirty option can also be used to specify what is appended, instead
of the default string "-dirty".
$ git describe --dirty=.mod
v1.6.5-15-gc274db7.mod
Many build scripts use `git describe` to produce a version number based on
the description of HEAD (on which the work tree is based) + saying that if
the build contains uncommitted changes. This patch helps the writing of
such scripts since `git describe --dirty` does directly the intended thing.
Three possiblities were considered while discussing this new feature:
1. Describe the work tree by default and describe HEAD only if "HEAD" is
explicitly specified
Pro: does the right thing by default (both for users and for scripts)
Pro: other git commands that works on the work tree by default
Con: breaks existing scripts used by the Linux kernel and other projects
2. Use --worktree instead of --dirty
Pro: does what it says: "git describe --worktree" describes the work tree
Con: other commands do not require a --worktree option when working
on the work tree (it often is the default mode for them)
Con: unusable with an optional value: "git describe --worktree=.mod"
is quite unintuitive.
3. Use --dirty as in this patch
Pro: makes sense to specify an optional value (what the dirty mark is)
Pro: does not have any of the big cons of previous alternatives
* does not break scripts
* is not inconsistent with other git commands
This patch takes the third approach.
Signed-off-by: Jean Privat <jean@pryen.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-describe-all-tag-warning:
describe: Avoid unnecessary warning when using --all
|
|
In 212945d4 ("Teach git-describe to verify annotated tag names
before output") git-describe learned how to output a warning if
an annotated tag object was matched but its internal name doesn't
match the local ref name.
However, "git describe --all" causes the local ref name to be
prefixed with "tags/", so we need to skip over this prefix before
comparing the local ref name with the name recorded inside of the
tag object.
Patch-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the caller supplies --tags they want the lightweight, unannotated
tags to be searched for a match. If a lightweight tag is closer
in the history, it should be matched, even if an annotated tag is
reachable further back in the commit chain.
The same applies with --all when matching any other type of ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-By: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we match a lightweight (non-annotated tag) as the name to
output and --long was requested we do not have a tag, nor do
we have a tagged object to display. Instead we must use the
object we were passed as input for the long format display.
Reported-by: Mark Burton <markb@ordern.com>
Backtraced-by: Mikael Magnusson <mikachu@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
describe: match pattern for lightweight tags too
|
|
The <pattern> given "git describe --match" was used only to filter tag
objects, and not to filter lightweight tags. This fixes it.
[jc: made the log to clarify this is a bugfix, not an enhancement, with
additional test]
Signed-off-by: Michael Dressel <MichaelTiloDressel@t-online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Existing test checked --long only for exactly tagged commit. We should
make sure it works sensibly for commits that are not tagged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in 212945d4 ("Teach git-describe to verify annotated tag names
before output") I taught git-describe to output the name shown in the
"tag" header of an annotated tag, rather than the name it is actually
stored under in this repository's ref namespace.
This test case verifies this is working correctly by renaming the ref
for an annotated tag to a different name that what is recorded in the
tag body, and verifying that tag is returned. We also verify there is
a message shown on stderr to inform the user that the tag is possibly
stored under the wrong name locally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c374b91c ("git-describe: use tags found in packed-refs correctly")
Junio fixed an issue where git-describe did not parse a tag object it
obtained from a packed-refs file, as the peel information was read in
from packed-refs and not the tag object itself.
This new test case verifies the fix listed above is functioning, and
does not have a regression in the future.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If git-describe fails we never execute the test_expect_success,
so we never actually test for failure. This is horribly wrong.
We need to always run the test case, but the test case is only
supposed to succeed if the prior git-describe returned 0.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is useful when you want to see parts of the commit object name
in "describe" output, even when the commit in question happens to be
a tagged version. Instead of just emitting the tag name, it will
describe such a commit as v1.2-0-deadbeef (0th commit since tag v1.2
that points at object deadbeef....).
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Ævar Arnfjörð Bjarmason
Junio C Hamano
Sebastian Staudt
brian m. carlson
Jeff King
Daniel Knittl-Frank
Stefan Beller
Max Kirillov
Ramsay Jones
Michael J Gruber
Ville Skyttä
Jacob Keller
SZEDER Gábor
Mike Crowe
Shawn O. Pearce
Thomas Rast
Jean Privat
Nanako Shiraishi
Michael Dressel
Santi Béjar