| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test t6006.71 ("oneline with empty message") was creating two commits
with simple commit messages, and then running filter-branch to rewrite
the commit messages to be "empty". This test was introduced in commit
1fb5fdd25f0 ("rev-list: fix --pretty=oneline with empty message",
2010-03-21) and written this way because the --allow-empty-message
option to git commit did not exist at the time.
However, the filter-branch invocation used differed slightly from
--allow-empty-message in that it would have a commit message consisting
solely of a single newline, and as such was not testing what the
original commit intended to test. Since both a truly empty commit
message and a commit message with a single linefeed could trigger the
original bug, modify the test slightly to include an example of each.
Despite only being one piece of the 71st test and there being 73 tests
overall, this small change to just this one test speeds up the overall
execution time of t6006 (as measured by the best of 3 runs of `time
./t6006-rev-list-format.sh`) by about 11% on Linux, 13% on Mac, and
about 15% on Windows.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit c5bdfe677cfab5b2e87771c35565d44d3198efda.
That commit was done primarily to prepare for the weakening
of "always" in 6be4595edb (color: make "always" the same as
"auto" in config, 2017-10-03). But since we've now reverted
6be4595edb, there's no need for us to remove "-c
color.ui=always" from the tests. And in fact it's a good
idea to restore these tests, to make sure that "always"
continues to work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We test the %C() format placeholders with a variety of
color-inducing options, including "--color" and
"-c color.ui=always". In preparation for the behavior of
"always" changing, we need to do something with those
"always" tests.
We can drop ones that expect "always" to turn on color even
to a file, as that will become a synonym for "auto", which
is already tested.
For the "--no-color" test, we need to make sure that color
would otherwise be shown. To do this, we can use
test_terminal, which enables colors in the default setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The color placeholders have traditionally been
unconditional, showing colors even when git is not otherwise
configured to do so. This was not so bad for their original
use, which was on the command-line (and the user could
decide at that moment whether to add colors or not). But
these days we have configured formats via pretty.*, and
those should operate correctly in multiple contexts.
In 3082517 (log --format: teach %C(auto,black) to respect
color config, 2012-12-17), we gave an extended placeholder
that could be used to accomplish this. But it's rather
clunky to use, because you have to specify it individually
for each color (and their matching resets) in the format.
We shied away from just switching the default to auto,
because it is technically breaking backwards compatibility.
However, there's not really a use case for unconditional
colors. The most plausible reason you would want them is to
redirect "git log" output to a file. But there, the right
answer is --color=always, as it does the right thing both
with custom user-format colors and git-generated colors.
So let's switch to the more useful default. In the
off-chance that somebody really does find a use for
unconditional colors without wanting to enable the rest of
git's colors, we provide a new %C(always,...) to enable the
old behavior. And we can remind them of --color=always in
the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rev-list pretty-prints a commit, it creates a new
pretty_print_context and copies items from the rev_info
struct. We don't currently copy the "use_color" field,
though. Nobody seems to have noticed because the only part
of pretty.c that cares is the %C(auto,...) placeholder, and
presumably not many people use that with the rev-list
plumbing (as opposed to with git-log).
It will become more noticeable in a future patch, though,
when we start treating all user-format colors as auto-colors
(in which case it would become impossible to format colors
with rev-list, even with --color=always).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we put literal ANSI terminal codes into our test
scripts, it makes diffs on those scripts hard to read (the
colors may be indistinguishable from diff coloring, or in
the case of a reset, may not be visible at all).
Some scripts get around this by including human-readable
names and converting to literal codes with a git-config
hack. This makes the actual code diffs look OK, but test_cmp
output suffers from the same problem.
Let's use test_decode_color instead, which turns the codes
into obvious text tags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-log(1) documents that when specifying the `%C(auto)` format
placeholder will "turn on auto coloring on the next %placeholders
until the color is switched again."
However, when `%C(auto)` is used, the present implementation will turn
colors on unconditionally (even if the color configuration is turned off
for the current context - for example, `--no-color` was specified or the
color is `auto` and the output is not a tty).
Update `format_commit_one` to examine the current context when a format
string of `%C(auto)` is specified, which ensures that we will not
unconditionally write colors. This brings that behavior in line with
the behavior of `%C(auto,<colorname>)`, and allows the user the ability
to specify that color should be displayed only when the output is a
tty.
Additionally, add a test for `%C(auto)` and update the existing tests
for `%C(auto,...)` as they were misidentified as being applicable to
`%C(auto)`.
Tests from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git commit -m with some iso8859-1 encoded stuff is doomed to fail in MinGW,
because Windows don't let you pass encoded bytes to a process (CreateProcessW
always takes a UTF-16LE encoded string).
It is safe to pass the iso8859-1 message using a file or a pipe.
Thanks-to: Karsten Blees <blees@dcon.de>
Author: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
|
|
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pretty format string %<(N,[ml]trunc)>%s truncates subject to a given
length with an appropriate padding. This works for non-ASCII texts when
i18n.logOutputEncoding is UTF-8 only (independently of a printed commit
message encoding) but does not work when i18n.logOutputEncoding is NOT
UTF-8.
In 7e77df3 (pretty: two phase conversion for non utf-8 commits, 2013-04-19)
'format_commit_item' function assumes commit message to be in UTF-8.
And that was so until ecaee80 (pretty: --format output should honor
logOutputEncoding, 2013-06-26) where conversion to logOutputEncoding was
added before calling 'format_commit_message'.
Correct this by converting a commit message to UTF-8 first (as it
assumed in 7e77df3 (pretty: two phase conversion for non utf-8 commits,
2013-04-19)). Only after that convert a commit message to an actual
logOutputEncoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pretty format string %<(N,[ml]trunc)>%s truncates subject to a given
length with an appropriate padding. This works for non-ASCII texts when
i18n.logOutputEncoding is UTF-8 only (independently of a printed commit
message encoding) but does not work when i18n.logOutputEncoding is NOT
UTF-8.
There were no breakages as far as were no tests for the case
when both a commit message and logOutputEncoding are not UTF-8.
Add failing tests for that which will be fixed in the next patch.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tested encoding is always available in a variable. Use it instead of
hardcoding. Also, to be in line with other tests use ISO8859-1
(uppercase) rather then iso8859-1.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
i18n.commitEncoding is not set
In de6029a (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26) 'complex-subject' test was changed.
Revert it back, because that change actually removed tests for "%b"
and "%s" with i18n.commitEncoding set. Also, add two more tests for
mentioned above "%b" and "%s" to test encoding conversions with no
i18n.commitEncoding set.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Function 'test_format' has become harder to read after its change in
de6029a2 (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26). Simplify it by moving its "should we
expect it to fail?" parameter to the end.
Note, current code does not use this last parameter as far as there
are no tests expected to fail. We can keep that for future use.
Also, reformat comments.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Improved-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both "iso8859-1" and "iso-8859-1" are understood as latin-1 by
modern platforms, but the latter is not understood by older
platforms;update tests to use the former.
This is in line with 3994e8a9 (t4201: use ISO8859-1 rather than
ISO-8859-1, 2009-12-03), which did the same.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One can set an alias
$ git config alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch adds failing tests for the next patch that fixes them.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Always assume format_commit_item() takes an utf-8 string for string
handling simplicity (we can handle utf-8 strings, but can't with other
encodings).
If commit message is in non-utf8, or output encoding is not, then the
commit is first converted to utf-8, processed, then output converted
to output encoding. This of course only works with encodings that are
compatible with Unicode.
This also fixes the iso8859-1 test in t6006. It's supposed to create
an iso8859-1 commit, but the commit content in t6006 is in UTF-8.
t6006 is now converted back in UTF-8 (the downside is we can't put
utf-8 strings there anymore).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test_format function did not indent its in-line test
script in an attempt to make the output of the test look
better. But it does not make a big difference to the output,
and the source looks quite ugly. Let's use our normal
indenting instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An author/committer name that is a single character was mishandled as an
invalid name by mistake.
|
|
Commit 4b340cf split the logic to parse an ident line out of
pretty.c's format_person_part. But in doing so, it
accidentally introduced an off-by-one error that caused it
to think that single-character names were invalid.
This manifested itself as the "%an" format failing to show
anything at all for a single-character name.
Reported-by: Brian Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing a reflog walk, you can get some information about
the reflog (such as the subject line), but not the identity
information (i.e., name and email).
Let's make those available, mimicing the options for author
and committer identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have the '+' modifiier which helps combine format specifiers which
may possibly be empty, e.g. '%s%+b%n'.
Introduce an analogous ' ' (space) modifier which adds a space before
non-empty items. This helps assemble "one line type" format specifiers.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
|
|
* eb/unpretty-b-format:
Add `%B' in format strings for raw commit body in `git log' and friends
|
|
Prior to this, the output of git log -1 --format=%h was always 7
characters long, without regard to whether --abbrev had been passed.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also update the documentation text and add a test.
Signed-off-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
55246aa (Dont use "<unknown>" for placeholders and suppress printing
of empty user formats) introduced a check to prevent empty
user-formats from being printed. This test didn't take empty commit
messages into account, and prevented the line-termination from being
output. This lead to multiple commits on a single line.
Correct it by guarding the check with a check for user-format. A
similar correction for the --graph code-path has been included.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only way to safely quote arbitrary text in a pretty-print user
format is to replace instances of "%" with "%x25". This is slightly
unreadable, and many users would expect "%%" to produce a single
"%", as that is what printf format specifiers do.
This patch converts "%%" to "%" for all users of strbuf_expand():
(1) git-daemon interpolated paths
(2) pretty-print user formats
(3) merge driver command lines
Case (1) was already doing the conversion itself outside of
strbuf_expand(). Case (2) is the intended beneficiary of this patch.
Case (3) users probably won't notice, but as this is user-facing
behavior, consistently providing the quoting mechanism makes sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conflicts:
pretty.c
t/t6006-rev-list-format.sh
|
|
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a command like:
git log --pretty=format:%ad --date=short
the date option was ignored. This patch causes it to use whatever
format was specified by --date (or by --relative-date, etc), just
as the non-user formats would do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Issac Trotts
brian m. carlson
Jeff King
René Scharfe
Edward Thomson
Pat Thoyts
Junio C Hamano
Alexey Shumkin
David Tran
Nguyễn Thái Ngọc Duy
Stefano Lattarini
Michael J Gruber
Will Palmer
Matthew Ogilvie
Eli Barzilay
Erik Faye-Lund
Thomas Rast
Nanako Shiraishi