| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 512477b (tests: use "env" to run commands with temporary env-var
settings) missed some variables in the remote-helpers test. Also
standardize these.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote helper crashes while pushing we should revert back to the
state before the push, however, it's possible that `git fast-export`
already finished its job, and therefore has exported the marks already.
This creates a synchronization problem because from that moment on
`git fast-{import,export}` will have marks that the remote helper is not
aware of and all further commands fail (if those marks are referenced).
The fix is to tell `git fast-export` to export to a temporary file, and
only after the remote helper has finishes successfully, move to the
final destination.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dt/tests-with-env-not-subshell:
tests: use "env" to run commands with temporary env-var settings
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise they cannot know when to force the push or not (other than
hacks).
Tests-by: Richard Hansen <rhansen@bbn.com>
Documentation-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 664059fb (transport-helper: update remote helper namespace,
2013-04-17), a 'push' operation on a remote helper updates the
private ref by default. This is often a good thing, but it can also
be desirable to disable this update to force the next 'pull' to
re-import the pushed revisions.
Allow remote-helpers to disable the automatic update by introducing a new
capability.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prior to commit 81d340d4, we did not print any error message
if a remote transport helper died unexpectedly. If a helper
did not print any error message (e.g., because it crashed),
the user could be left confused. That commit tried to
rectify the situation by printing a note that the helper
exited unexpectedly.
However, this makes a much more common case worse: when a
helper does die with a useful message, we print the extra
"Reading from 'git-remote-foo failed" message. This can also
end up confusing users, as they may not even know what
remote helpers are (e.g., the fact that http support comes
through git-remote-https is purely an implementation detail
that most users do not know or care about).
Since we do not have a good way of knowing whether the
helper printed a useful error, and since the common failure
mode is for it to do so, let's default to remaining quiet.
Debuggers can dig further by setting GIT_TRANSPORT_HELPER_DEBUG.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to fc/transport-helper-error-reporting topic.
* js/transport-helper-error-reporting-fix:
git-remote-testgit: build it to run under $SHELL_PATH
git-remote-testgit: further remove some bashisms
git-remote-testgit: avoid process substitution
|
|
Update transport helper to report errors and maintain ref hierarchy
used to keep track of remote helper state better.
* fc/transport-helper-error-reporting:
transport-helper: fix remote helper namespace regression
test: remote-helper: add missing and
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
|
|
Commit 664059f (transport-helper: update remote helper namespace)
updates the namespace when the push succeeds or not; we should do it
only when it succeeded.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/push-with-export-reporting-result:
transport-helper: improve push messages
|
|
If there's already a remote-helper tracking ref, we can fetch the
SHA-1 to report proper push messages (as opposed to always reporting
[new branch]).
The remote-helper currently can specify the old SHA-1 to avoid this
problem, but there's no point in forcing all remote-helpers to be aware
of git commit ids; they should be able to be agnostic of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like all the other shell scripts, replace the shebang line to
make sure it runs under the shell the user specified.
As this no longer depends on bashisms, t5801 does not have to say
bash must be available somewhere on the system.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not a portable expectation that a single-shot environment
variable assignment works when calling a shell function, not a
command.
Set and export the variable before calling "test_must_fail git push"
instead. This change would not hurt because this is the last
command in the subprocess and the environment will not seep through
to later tests without using a single-shot assignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing, the remote namespace is updated correctly
(e.g. refs/origin/master), but not the remote helper's
(e.g. refs/testgit/origin/master), which currently is only
updated while fetching.
Since the remote namespace is used to tell fast-export which commits
to avoid (because they were already imported/exported), it makes
sense to have them in sync so they don't get generated twice. If the
remote helper was implemented properly, they would be ignored, if
not, they probably would end up repeated.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the modes that need it. In the future we should probably error out,
instead of providing half-assed support.
The reason we want to do this is because if it's not present, the remote
helper might be updating refs/heads/*, or refs/remotes/origin/*,
directly, and in the process fetch will get confused trying to update
refs that are already updated, or older than what they should be. We
shouldn't be messing with the rest of git.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This has never worked, since it's inception the code simply skips all
the refs, essentially telling fast-export to do nothing.
Let's at least tell the user what's going on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The *:* refspec doesn't work, and never has, clarify the code and
documentation to reflect that. This in effect reverts commit 9e7673e
(gitremote-helpers(1): clarify refspec behaviour).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows a remote helper using the 'export' protocol to specify that
it supports signed tags, changing the handing from 'warn-strip' to
'verbatim'.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, attempting to push a signed tag to a remote helper which uses
fast-export results in the remote helper failing because the default
fast-export action for signed tags is "abort". This is not helpful for
users because there is no way to pass additional arguments to
fast-export here, either from the remote helper or from the command
line.
In general, the signature will be invalidated by whatever transformation
a remote helper performs on a tag to push it to a repository in a
different format so the correct behaviour is to strip the tag. Doing
this silently may surprise people, so use "warn-strip" to issue a
warning when a signed tag is encountered.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there's already a remote-helper tracking ref, we can fetch the SHA-1
to report proper push messages (as opposed to always reporting
[new branch]).
The remote-helper currently can specify the old SHA-1 to avoid this
problem, but there's no point in forcing all remote-helpers to be aware
of git commit ids; they should be able to be agnostic of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we try to read from a remote-helper and get EOF or an
error, we print a message indicating that the helper died.
However, users may not know that a remote helper was in use
(e.g., when using git-over-http), or even what a remote
helper is.
Let's print the name of the helper (e.g., "git-remote-https");
this makes it more obvious what the program is for, and
provides a useful token for reporting bugs or searching for
more information (e.g., in manpages).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a push fails because the remote-helper died (with fast-export),
the user may not see any error message. We do correctly die with a
failed exit code, as we notice that the helper has died while
reading back the ref status from the helper. However, we don't print
any message. This is OK if the helper itself printed a useful error
message, but we cannot count on that; let's let the user know that
the helper failed.
In the long run, it may make more sense to propagate the error back
up to push, so that it can present the usual status table and give a
nicer message. But this is a much simpler fix that can help
immediately.
While we're adding tests, let's also confirm that the remote-helper
dying is also detected when importing refs. We currently do so
robustly when the helper uses the "done" feature (and that is what
we test). We cannot do so reliably when the helper does not use the
"done" feature, but it is not even worth testing; the right solution
is for the helper to start using "done".
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an object has already been exported (and thus is in the marks) it's
flagged as SHOWN, so it will not be exported again, even if in a later
time it's exported through a different ref.
We don't need the object to be exported again, but we want the ref
updated, which doesn't happen.
Since we can't know if a ref was exported or not, let's just assume that
if the commit was marked (flags & SHOWN), the user still wants the ref
updated.
IOW: If it's specified in the command line, it will get updated,
regardless of whether or not the object was marked.
So:
% git branch test master
% git fast-export $mark_flags master
% git fast-export $mark_flags test
Would export 'test' properly.
Additionally, this fixes issues with remote helpers; now they can push
refs whose objects have already been exported, and a few other issues as
well. Update the tests accordingly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They have been marked as UNINTERESTING for a reason, lets respect
that. Currently the first ref is handled properly, but not the
rest. Assuming that all the refs point at the same commit in the
following example:
% git fast-export master ^uninteresting ^foo ^bar
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
reset refs/heads/uninteresting
from :0
% git fast-export ^uninteresting ^foo ^bar master
reset refs/heads/master
from :0
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
Clearly this is wrong; the negative refs should be ignored.
After this patch:
% git fast-export ^uninteresting ^foo ^bar master
# nothing
% git fast-export master ^uninteresting ^foo ^bar
# nothing
And even more, it would only happen if the ref is pointing to exactly
the same commit, but not otherwise:
% git fast-export ^next next
reset refs/heads/next
from :0
% git fast-export ^next next^{commit}
# nothing
% git fast-export ^next next~0
# nothing
% git fast-export ^next next~1
# nothing
% git fast-export ^next next~2
# nothing
The reason this happens is that before traversing the commits,
fast-export checks if any of the refs point to the same object, and any
duplicated ref gets added to a list in order to issue 'reset' commands
after the traversing. Unfortunately, it's not even checking if the
commit is flagged as UNINTERESTING. The fix of course, is to check it.
However, in order to do it properly we need to get the UNINTERESTING
flag from the command line, not from the commit object, because
"^foo bar" will mark the commit 'bar' uninteresting if foo and bar
points at the same commit. rev_cmdline_info, which was introduced
exactly to handle this situation, contains all the information we
need for get_tags_and_duplicates(), plus the ref flag. This way the
rest of the positive refs will remain untouched; it's only the
negative ones that change in behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unfortunately a lot of these tests fail.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need a bare 'server' and an intermediary 'public'. The repos
can talk to each other directly; that's what we want to exercise.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was only to cover a bug that was fixed in remote-testpy not to
resurface.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This only makes sense for the python remote helpers framework. The tests
don't exercise any feature of transport helper. Remove them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exercising the python remote helper framework is for another tool and
another test. This is about testing the remote-helper interface.
It's way simpler, it exercises the same features of remote helpers, it's
easy to read and understand, and it doesn't depend on python.
For now let's just copy the old remote-helpers test script, although
some of those tests don't make sense. In addition, this script would be
able to test other features not currently being tested.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Felipe Contreras
Junio C Hamano
David Tran
Matthieu Moy
Jeff King
John Keeping