| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, there are two ways where the return codes of git commands are
lost. The first way is when a command is in the upstream of a pipe. In a
pipe, only the return code of the last command is used. Thus, all other
commands will have their return codes masked. Rewrite pipes so that
there are no git commands upstream.
The other way is when a command is in a non-assignment command
substitution. The return code will be lost in favour of the surrounding
command's. Rewrite instances of this such that git commands are in an
assignment-only command substitution.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In inconsistency(), we had two `git rev-parse` invocations in the
upstream of a pipe within a command substitution. In case this
invocation ever failed, its exit code would be swallowed up and we would
not know about it.
Pull the command substitutions out into variable assignments so that
their return codes are not lost.
Drop the pipe into `tr` because the $(...) substitution already takes
care of stripping out newlines, so the `tr` invocations in the code are
superfluous.
Finally, given the way the tests actually employ "one-time-sed" via
$(cat one-time-sed) in t/lib-httpd/apply-one-time-sed.sh, convert the
`printf` into an `echo`. This makes it consistent with the final "server
loses a ref - ref in want" test, which does use `echo` rather than
`printf`.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
't5703-upload-pack-ref-in-want.sh' sources 'lib-httpd.sh' near the end
to run a couple of httpd-specific tests, but 'lib-httpd.sh' skips all
the rest of the test script if the dependencies for running httpd
tests are not fulfilled. However, the last six tests in 't5703' are
not httpd-specific, but they are skipped as well when httpd tests
can't be run.
Move these six tests earlier in the test script, before 'lib-httpd.sh'
is sourced, so they will be run even when httpd tests aren't. Note
that this is not merely a pure code movement, because the setup test
case for the httpd tests needed an additional 'rm -rf
"$LOCAL_PRISTINE"' to clean up a directory left behind by the moved
non-httpd-specific tests.
Also add a comment at the end of this test script to warn against
adding non-httpd-specific tests at the end, in the hope that it will
help prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two loops that create 33 commits each using test_commit. Using
test_commit_bulk speeds this up from:
Benchmark #1: ./t5703-upload-pack-ref-in-want.sh --root=/var/ram/git-tests
Time (mean ± σ): 2.142 s ± 0.161 s [User: 1.136 s, System: 0.974 s]
Range (min … max): 1.903 s … 2.401 s 10 runs
to:
Benchmark #1: ./t5703-upload-pack-ref-in-want.sh --root=/var/ram/git-tests
Time (mean ± σ): 1.440 s ± 0.114 s [User: 737.7 ms, System: 615.4 ms]
Range (min … max): 1.230 s … 1.604 s 10 runs
for an average savings of almost 33%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
|
|
The `git serve` built-in was introduced in ed10cb952d31 (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ms/packet-err-check:
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
|
|
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
|
|
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The seq command is not in POSIX, and doesn't exist on
e.g. OpenBSD. We've had the test_seq wrapper since d17cf5f3a3 ("tests:
Introduce test_seq", 2012-08-04), but use of it keeps coming back,
e.g. in the recently added "fetch negotiator" tests being added here.
So let's also add a check to "make test-lint". The regex is aiming to
capture the likes of $(seq ..) and "seq" as a stand-alone command,
without capturing some existing cases where we e.g. have files called
"seq", as \bseq\b would do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests to check the behavior of fetching from a repository which
changes between rounds of negotiation (for example, when different
servers in a load-balancing agreement participate in the same stateless
RPC negotiation). This forms a baseline of comparison to the ref-in-want
functionality (which will be introduced to the client in subsequent
commits), and ensures that subsequent commits do not change existing
behavior.
As part of this effort, a mechanism to substitute strings in a single
HTTP response is added.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Denton Liu
SZEDER Gábor
Jeff King
Junio C Hamano
Masaya Suzuki
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Brandon Williams