| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to fsck objects received across multiple packs during a
single git fetch session has been broken when the packfile URI
feature was in use. A workaround has been added by disabling the
codepath to avoid keeping a packfile that is too small.
* jt/transfer-fsck-across-packs-fix:
fetch-pack: do not mix --pack_header and packfile uri
|
|
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
|
|
Teach index-pack to print dangling .gitmodules links after its "keep" or
"pack" line instead of declaring an error, and teach fetch-pack to check
such lines printed.
This allows the tree side of the .gitmodules link to be in one packfile
and the blob side to be in another without failing the fsck check,
because it is now fetch-pack which checks such objects after all
packfiles have been downloaded and indexed (and not index-pack on an
individual packfile, as it is before this commit).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
|
|
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next patch, we'll add support for unconditionally enabling the
'pack.writeReverseIndex' setting with a new GIT_TEST_WRITE_REV_INDEX
environment variable.
This causes a little bit of fallout with tests that, for example,
compare the list of files in the pack directory being unprepared to see
.rev files in its output.
Those locations can be cleaned up to look for specific file extensions,
rather than take everything in the pack directory (for instance) and
then grep out unwanted items.
Once the pack.writeReverseIndex option has been thoroughly
tested, we will default it to 'true', removing GIT_TEST_WRITE_REV_INDEX,
and making it possible to revert this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[6-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching with packfile URIs and transfer.fsckobjects=1, use the
--fsck-objects instead of the --strict flag when invoking index-pack so
that links are not checked, only objects. This is because incomplete
links are expected. (A subsequent connectivity check will be done when
all the packs have been downloaded regardless of whether
transfer.fsckobjects is set.)
This is similar to 98a2ea46c2 ("fetch-pack: do not check links for
partial fetch", 2018-03-15), but for packfile URIs instead of partial
clones.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recently added test in t5702 started using git verify-pack outside of
a repository. While this poses no problems with SHA-1, with SHA-256 we
implicitly rely on the setup of the repository to initialize our hash
algorithm settings.
Since we're not in a repository here, we need to provide git verify-pack
help to set things up properly. git index-pack already knows an
--object-format option, so let's accept one as well and pass it down to
our git index-pack invocation. Since we're now dynamically adjusting
the elements in argv, let's switch to using struct argv_array to manage
them. Finally, let's make t5702 pass the proper argument on down to its
git verify-pack caller.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
Allow runtime upgrade of the repository format version, which needs
to be done carefully.
There is a rather unpleasant backward compatibility worry with the
last step of this series, but it is the right thing to do in the
longer term.
* xl/upgrade-repo-format:
check_repository_format_gently(): refuse extensions for old repositories
sparse-checkout: upgrade repository to version 1 when enabling extension
fetch: allow adding a filter after initial clone
repository: add a helper function to perform repository format upgrade
|
|
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
|
|
In order to make this test work with SHA-256, offer an object-format
capability so that both sides use the same algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach upload-pack to send part of its packfile response as URIs.
An administrator may configure a repository with one or more
"uploadpack.blobpackfileuri" lines, each line containing an OID, a pack
hash, and a URI. A client may configure fetch.uriprotocols to be a
comma-separated list of protocols that it is willing to use to fetch
additional packfiles - this list will be sent to the server. Whenever an
object with one of those OIDs would appear in the packfile transmitted
by upload-pack, the server may exclude that object, and instead send the
URI. The client will then download the packs referred to by those URIs
before performing the connectivity check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Retroactively adding a filter can be useful for existing shallow clones as
they allow users to see earlier change histories without downloading all
git objects in a regular --unshallow fetch.
Without this patch, users can make a clone partial by editing the
repository configuration to convert the remote into a promisor, like:
git config core.repositoryFormatVersion 1
git config extensions.partialClone origin
git fetch --unshallow --filter=blob:none origin
Since the hard part of making this work is already in place and such
edits can be error-prone, teach Git to perform the required configuration
change automatically instead.
Note that this change does not modify the existing git behavior which
recognizes setting extensions.partialClone without changing
repositoryFormatVersion.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated with a partially written
packet, remote-curl will blindly send the partially written packet
before waiting on more input from fetch-pack. Meanwhile, fetch-pack will
read the partial packet and continue reading, expecting more input. This
results in a deadlock between the two processes.
For a stateless connection, inspect packets before sending them and
error out if a packet line packet is incomplete.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce unnecessary round-trip when running "ls-remote" over the
stateless RPC mechanism.
* jk/no-flush-upon-disconnecting-slrpc-transport:
transport: don't flush when disconnecting stateless-rpc helper
|
|
Since ba227857d2 (Reduce the number of connects when fetching,
2008-02-04), when we disconnect a git transport, we send a final flush
packet. This cleanly tells the other side that we're done, and avoids
the other side complaining "the remote end hung up unexpectedly" (though
we'd only see that for transports that pass along the server stderr,
like ssh or local-host).
But when we've initiated a v2 stateless-connect session over a transport
helper, there's no point in sending this flush packet. Each operation
we've performed is self-contained, and the other side is fine with us
hanging up between operations.
But much worse, by sending the flush packet we may cause the helper to
issue an entirely new request _just_ to send the flush packet. So we can
incur an extra network request just to say "by the way, we have nothing
more to send".
Let's drop this extra flush packet. As the test shows, this reduces the
number of POSTs required for a v2 ls-remote over http from 2 to 1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit e70a3030e7 ("fetch: do not list refs if fetching only hashes",
2018-10-07) and its ancestors taught Git, as an optimization, to skip
the ls-refs step when it is not necessary during a protocol v2 fetch
(for example, when lazy fetching a missing object in a partial clone, or
when running "git fetch --no-tags <remote> <SHA-1>"). But that was only
done for natively supported protocols; in particular, HTTP was not
supported.
Teach Git to skip ls-refs when using remote helpers that support connect
or stateless-connect. To do this, fetch() is made an acceptable entry
point. Because fetch() can now be the first function in the vtable
called, "get_helper(transport);" has to be added to the beginning of
that function to set the transport up (if not yet set up) before
process_connect() is invoked.
When fetch() is called, the transport could be taken over (this happens
if "connect" or "stateless-connect" is successfully run without any
"fallback" response), or not. If the transport is taken over, execution
continues like execution for natively supported protocols
(fetch_refs_via_pack() is executed, which will fetch refs using ls-refs
if needed). If not, the remote helper interface will invoke
get_refs_list() if it hasn't been invoked yet, preserving existing
behavior.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of test scripts that are not completely
httpd-specific, but do run a few httpd-specific tests at the end.
These test scripts source 'lib-httpd.sh' somewhere mid-script, which
then skips all the rest of the test script if the dependencies for
running httpd tests are not fulfilled.
As the previous two patches in this series show, already on two
occasions non-httpd-specific tests were appended at the end of such
test scripts, and, consequently, they were skipped as well when httpd
tests couldn't be run.
Add a comment at the end of these test scripts to warn against adding
non-httpd-specific tests at the end, in the hope that they will help
prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two loops that create 32 commits each using test_commit. Using
test_commit_bulk speeds this up from:
Benchmark #1: ./t5702-protocol-v2.sh --root=/var/ram/git-tests
Time (mean ± σ): 5.409 s ± 0.513 s [User: 2.382 s, System: 2.466 s]
Range (min … max): 4.633 s … 5.927 s 10 runs
to:
Benchmark #1: ./t5702-protocol-v2.sh --root=/var/ram/git-tests
Time (mean ± σ): 3.956 s ± 0.242 s [User: 1.775 s, System: 1.627 s]
Range (min … max): 3.449 s … 4.239 s 10 runs
for an average savings of over 25%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
|
|
"git clone" learned a new --server-option option when talking over
the protocol version 2.
* jt/clone-server-option:
clone: send server options when using protocol v2
transport: die if server options are unsupported
|
|
The `git serve` built-in was introduced in ed10cb952d31 (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5e3548ef16 ("fetch: send server options when using protocol v2",
2018-04-24) taught "fetch" the ability to send server options when using
protocol v2, but not "clone". This ability is triggered by "-o" or
"--server-option".
Teach "clone" the same ability, except that because "clone" already
has "-o" for another parameter, teach "clone" only to receive
"--server-option".
Explain in the documentation, both for clone and for fetch, that server
handling of server options are server-specific. This is similar to
receive-pack's handling of push options - currently, they are just sent
to hooks to interpret as they see fit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Server options were added in commit 5e3548ef16 ("fetch: send server
options when using protocol v2", 2018-04-24), supported only for
protocol version 2. But if the user specifies server options, and the
protocol version being used doesn't support them, the server options are
silently ignored.
Teach any transport users to die instead in this situation, just like
how "push" dies if push options are provided when the server doesn't
support them.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When transmitting and receiving POSTs for protocol v0 and v1,
remote-curl uses post_rpc() (and associated functions), but when doing
the same for protocol v2, it uses a separate set of functions
(proxy_rpc() and others). Besides duplication of code, this has caused
at least one bug: the auth retry mechanism that was implemented in v0/v1
was not implemented in v2.
To fix this issue and avoid it in the future, make remote-curl also use
post_rpc() when handling protocol v2. Because line lengths are written
to the HTTP request in protocol v2 (unlike in protocol v0/v1), this
necessitates changes in post_rpc() and some of the functions it uses;
perform these changes too.
A test has been included to ensure that the code for both the unchunked
and chunked variants of the HTTP request is exercised.
Note: stateless_connect() has been updated to use the lower-level packet
reading functions instead of struct packet_reader. The low-level control
is necessary here because we cannot change the destination buffer of
struct packet_reader while it is being used; struct packet_buffer has a
peeking mechanism which relies on the destination buffer being present
in between a peek and a read.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix namespace support in protocol v2.
* jt/namespaced-ls-refs-fix:
ls-refs: filter refs using namespace-stripped name
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
|
|
If a user fetches refs/heads/master from a repo with namespace "ns", the
remote is expected to (1) not send the real refs/heads/master, and (2)
send refs/namespaces/ns/refs/heads/master with the name
refs/heads/master. (1) indeed happens now, but not (2) - Git only sends
refs that have the user-given prefix, but it checks them against the
full name of the ref (the one starting with refs/namespaces), and not
the namespace-stripped one.
This is demonstrated by the patch in the test. Currently, it results in
"fatal: couldn't find remote ref refs/heads/master" despite both
unnamespaced and namespaced master being present. With the code change,
it produces the expected result.
Check the ref prefixes against the namespace-stripped name.
This bug was discovered through applying patches [1] that override
protocol.version to 2 in repositories when running tests, allowing us to
notice differences in behavior across different protocol versions.
[1] https://public-inbox.org/git/cover.1547677183.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 685fbd3291 ("fetch-pack: perform a fetch using v2", 2018-03-15)
attempted to teach Git deepen-relative in protocol v2 (among other
things), but it didn't work:
(1) fetch-pack.c needs to emit "deepen-relative".
(2) upload-pack.c needs to ensure that the correct deepen_relative
variable is passed to deepen() (there are two - the static variable
and the one in struct upload_pack_data).
(3) Before deepen() computes the list of reachable shallows, it first
needs to mark all "our" refs as OUR_REF. v2 currently does not do
this, because unlike v0, it is not needed otherwise.
Fix all this and include a test demonstrating that it works now. For
(2), the static variable deepen_relative is also eliminated, removing a
source of confusion.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching using protocol v2, the remote may send a "shallow-info"
section if the client is shallow. If so, Git as the client currently
takes the shallow file lock, even if the "shallow-info" section is
empty.
This is not a problem except that Git does not support taking the
shallow file lock after modifying the shallow file, because
is_repository_shallow() stores information that is never cleared. And
this take-after-modify occurs when Git does a tag-following fetch from a
shallow repository on a transport that does not support tag following
(since in this case, 2 fetches are performed).
To solve this issue, take the shallow file lock (and perform all other
shallow processing) only if the "shallow-info" section is non-empty;
otherwise, behave as if it were empty.
A full solution (probably, ensuring that any action of committing
shallow file locks also includes clearing the information stored by
is_repository_shallow()) would solve the issue without need for this
patch, but this patch is independently useful (as an optimization to
prevent writing a file in an unnecessary case), hence why I wrote it. I
have included a NEEDSWORK outlining the full solution.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" was a bit loose in parsing resposes from the other side
when talking over the protocol v2.
* jt/tighten-fetch-proto-v2-response:
fetch-pack: be more precise in parsing v2 response
|
|
"git fetch" over protocol v2 into a shallow repository failed to
fetch full history behind a new tip of history that was diverged
before the cut-off point of the history that was previously fetched
shallowly.
* jt/upload-pack-v2-fix-shallow:
upload-pack: clear flags before each v2 request
upload-pack: make want_obj not global
upload-pack: make have_obj not global
|
|
Each section in a protocol v2 response is followed by either a DELIM
packet (indicating more sections to follow) or a FLUSH packet
(indicating none to follow). But when parsing the "acknowledgments"
section, do_fetch_pack_v2() is liberal in accepting both, but determines
whether to continue reading or not based solely on the contents of the
"acknowledgments" section, not on whether DELIM or FLUSH was read.
There is no issue with a protocol-compliant server, but can result in
confusing error messages when communicating with a server that
serves unexpected additional sections. Consider a server that sends
"new-section" after "acknowledgments":
- client writes request
- client reads the "acknowledgments" section which contains no "ready",
then DELIM
- since there was no "ready", client needs to continue negotiation, and
writes request
- client reads "new-section", and reports to the end user "expected
'acknowledgments', received 'new-section'"
For the person debugging the involved Git implementation(s), the error
message is confusing in that "new-section" was not received in response
to the latest request, but to the first one.
One solution is to always continue reading after DELIM, but in this
case, we can do better. We know from the protocol that "ready" means at
least the packfile section is coming (hence, DELIM) and that no "ready"
means that no sections are to follow (hence, FLUSH). So teach
process_acks() to enforce this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
|
|
Suppose a server has the following commit graph:
A B
\ /
O
We create a client by cloning A from the server with depth 1, and add
many commits to it (so that future fetches span multiple requests due to
lengthy negotiation). If it then fetches B using protocol v2, the fetch
spanning multiple requests, the resulting packfile does not contain O
even though the client did report that A is shallow.
This is because upload_pack_v2() can be called multiple times while
processing the same session. During the 2nd and all subsequent
invocations, some object flags remain from the previous invocations. In
particular, CLIENT_SHALLOW remains, preventing process_shallow() from
adding client-reported shallows to the "shallows" array, and hence
pack-objects not knowing about these client-reported shallows.
Therefore, teach upload_pack_v2() to clear object flags at the start of
each invocation. This has some other results:
- THEY_HAVE gates addition of objects to have_obj in process_haves().
Previously in upload_pack_v2(), have_obj needed to be static because
once an object is added to have_obj, it is never readded and thus we
needed to retain the contents of have_obj between invocations. Now
that flags are cleared, this is no longer necessary. This patch does
not change the behavior of ok_to_give_up() (THEY_HAVE is still set on
each "have") and got_oid() (used only in non-v2)); THEY_HAVE is not
used in any other function.
- WANTED gates addition of objects to want_obj in parse_want() and
parse_want_ref(). It is also used in receive_needs(), but that is
only used in non-v2. For the same reasons as THEY_HAVE, want_obj no
longer needs to be static in upload_pack_v2().
- CLIENT_SHALLOW is changed as discussed above.
Clearing of the other 5 flags does not affect functionality in v2. (Note
that in non-v2, upload_pack() is only called once per process, so each
invocation starts with blank flags anyway.)
- OUR_REF is only used in non-v2.
- COMMON_KNOWN is only used as a scratch flag in ok_to_give_up().
- SHALLOW is passed to invocations in deepen() and
deepen_by_rev_list(), but upload-pack doesn't use it.
- NOT_SHALLOW is used by send_shallow() and send_unshallow(), but
invocations of those functions are always preceded by code that sets
NOT_SHALLOW on the appropriate objects.
- HIDDEN_REF is only used in non-v2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various test scripts have been updated for style and also correct
handling of exit status of various commands.
* md/test-cleanup:
tests: order arguments to git-rev-list properly
t9109: don't swallow Git errors upstream of pipes
tests: don't swallow Git errors upstream of pipes
t/*: fix ordering of expected/observed arguments
tests: standardize pipe placement
Documentation: add shell guidelines
t/README: reformat Do, Don't, Keep in mind lists
|
|
If only hash literals are given on a "git fetch" command-line, tag
following is not requested, and the fetch is done using protocol v2, a
list of refs is not required from the remote. Therefore, optimize by
invoking transport_get_remote_refs() only if we need the refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When all refs to be fetched are exact OIDs, it is possible to perform a
fetch without requiring the remote to list refs if protocol v2 is used.
Teach Git to do this.
This currently has an effect only for lazy fetches done from partial
clones. The change necessary to likewise optimize "git fetch <remote>
<sha-1>" will be done in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Tan
Junio C Hamano
Taylor Blau
Johannes Schindelin
brian m. carlson
Xin Li
Denton Liu
Jeff King
Elijah Newren
SZEDER Gábor