summaryrefslogtreecommitdiff
path: root/t/t5601-clone.sh
AgeCommit message (Collapse)AuthorFilesLines
2010-05-24decode file:// and ssh:// URLsLibravatar Jeff King1-0/+12
We generally treat these as equivalent to "/path/to/repo" and "host:path_to_repo" respectively. However, they are URLs and as such may be percent-encoded. The current code simply uses them as-is without any decoding. With this patch, we will now percent-decode any file:// or ssh:// url (or ssh+git, git+ssh, etc) at the transport layer. We continue to treat plain paths and "host:path" syntax literally. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-04clone: quell the progress report from init and report on cloneLibravatar Junio C Hamano1-1/+1
Currently, a local git clone reports only initializing an empty git dir, which is potentially confusing. Instead, report that cloning is in progress and when it is done (unless -q) is given, and suppress the init report. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-02Merge branch 'maint-1.6.2' into maint-1.6.3Libravatar Junio C Hamano1-2/+4
* maint-1.6.2: clone: disconnect transport after fetching
2009-09-02clone: disconnect transport after fetchingLibravatar Jeff King1-2/+4
The current code just leaves the transport in whatever state it was in after performing the fetch. For a non-empty clone over the git protocol, the transport code already disconnects at the end of the fetch. But for an empty clone, we leave the connection hanging, and eventually close the socket when clone exits. This causes the remote upload-pack to complain "the remote end hung up unexpectedly". While this message is harmless to the clone itself, it is unnecessarily scary for a user to see and may pollute git-daemon logs. This patch just explicitly calls disconnect after we are done with the remote end, which sends a flush packet to upload-pack and cleanly disconnects, avoiding the error message. Other transports are unaffected or slightly improved: - for a non-empty repo over the git protocol, the second disconnect is a no-op (since we are no longer connected) - for "walker" transports (like HTTP or FTP), we actually free some used memory (which previously just sat until the clone process exits) - for "rsync", disconnect is always a no-op anyway Signed-off-by: Jeff King <peff@peff.net> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-03Make git-clone respect branch.autosetuprebaseLibravatar Junio C Hamano1-0/+15
When git-clone creates an initial branch it was not checking the branch.autosetuprebase configuration option (which may exist in ~/.gitconfig). Refactor the code used by "git branch" to create a new branch, and use it instead of the insufficiently duplicated code in builtin-clone. Changes are partly, and the test is mostly, based on the previous work by Pat Notz. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-12Install the default "master" branch configuration after cloning a voidLibravatar Junio C Hamano1-0/+15
After "cloning from an empty repository", we have a configuration to describe the remote's URL and the default ref mappings, but we lack the branch configuration for the default branch we create on our end, "master". It is likely that the empty repository we cloned from will point the default "master" branch with its HEAD, so prepare the local configuration to match. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11Allow cloning to an existing empty directoryLibravatar Alexander Potashev1-0/+19
The die() message updated accordingly. The previous behaviour was to only allow cloning when the destination directory doesn't exist. [jc: added trivial tests] Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03clone: fix creation of explicitly named target directoryLibravatar Clemens Buchacher1-0/+18
'git clone <repo> path/' (note the trailing slash) fails, because the entire path is interpreted as leading directories. So when mkdir tries to create the actual path, it already exists. This makes sure trailing slashes are removed. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-07clone --mirror: avoid storing repeated tagsLibravatar Johannes Schindelin1-0/+12
With --mirror, clone asks for refs/* already, so it does not need to ask for ref/tags/*, too. Noticed by Cesar Eduardo Barros. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-03Flush output in start_asyncLibravatar Anders Melchiorsen1-0/+6
This prevents double output in case stdout is redirected. Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-03clone --bare: Add ".git" suffix to the directory name to clone intoLibravatar Johannes Schindelin1-0/+7
We have a tradition that bare repositories live in directories ending in ".git". To make this more a convention than just a tradition, teach "git clone --bare" to add a ".git" suffix to the directory name. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-02clone: Add an option to set up a mirrorLibravatar Johannes Schindelin1-0/+12
The command line $ git clone --mirror $URL is now a short-hand for $ git clone --bare $URL $ (cd $(basename $URL) && git remote add --mirror origin $URL) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-08Remove unnecessary pack-*.keep file after successful git-cloneLibravatar Shawn O. Pearce1-1/+19
Once a clone is successful we no longer need to hold onto the .keep file created by the transport. Delete the file so we can later repack the complete repository. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-25clone: create intermediate directories of destination repoLibravatar Jeff King1-0/+22
The shell version used to use "mkdir -p" to create the repo path, but the C version just calls "mkdir". Let's replicate the old behavior. We have to create the git and worktree leading dirs separately; while most of the time, the worktree dir contains the git dir (as .git), the user can override this using GIT_WORK_TREE. We can reuse safe_create_leading_directories, but we need to make a copy of our const buffer to do so. Since merge-recursive uses the same pattern, we can factor this out into a global function. This has two other cleanup advantages for merge-recursive: 1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually creates bar, but this function just creates the leading directories. 2. mkdir_p took a mode argument, but it was completely ignored. Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-15builtin-clone: fix initial checkoutLibravatar Johannes Schindelin1-0/+7
Somewhere in the process of finishing up builtin-clone, the update of the working tree was lost. This was due to not using the option "merge" for unpack_trees(). Breakage noticed by Kevin Ballard. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Jeff King <peff@peff.net> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-27clone: detect and fail on excess parametersLibravatar Junio C Hamano1-0/+26
"git clone [options] $src $dst excess-garbage" simply ignored excess-garbage without giving any diagnostic message. Fix it. Signed-off-by: Junio C Hamano <gitster@pobox.com>