summaryrefslogtreecommitdiff
path: root/t/t5601-clone.sh
AgeCommit message (Collapse)AuthorFilesLines
2011-08-28Merge branch 'nd/maint-clone-gitdir'Libravatar Junio C Hamano1-0/+4
* nd/maint-clone-gitdir: clone: allow to clone from .git file read_gitfile_gently(): rename misnamed function to read_gitfile()
2011-08-23clone: clone from a repository with relative alternatesLibravatar Junio C Hamano1-1/+9
Cloning from a local repository blindly copies or hardlinks all the files under objects/ hierarchy. This results in two issues: - If the repository cloned has an "objects/info/alternates" file, and the command line of clone specifies --reference, the ones specified on the command line get overwritten by the copy from the original repository. - An entry in a "objects/info/alternates" file can specify the object stores it borrows objects from as a path relative to the "objects/" directory. When cloning a repository with such an alternates file, if the new repository is not sitting next to the original repository, such relative paths needs to be adjusted so that they can be used in the new repository. This updates add_to_alternates_file() to take the path to the alternate object store, including the "/objects" part at the end (earlier, it was taking the path to $GIT_DIR and was adding "/objects" itself), as it is technically possible to specify in objects/info/alternates file the path of a directory whose name does not end with "/objects". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22clone: allow more than one --referenceLibravatar Junio C Hamano1-0/+15
Also add a test to expose a long-standing bug that is triggered when cloning with --reference option from a local repository that has its own alternates. The alternate object stores specified on the command line are lost, and only alternates copied from the source repository remain. The bug will be fixed in the next patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22clone: allow to clone from .git fileLibravatar Nguyễn Thái Ngọc Duy1-0/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13i18n: .git file is not a human readable message (t5601)Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-12i18n: mark init-db messages for translationLibravatar Ævar Arnfjörð Bjarmason1-2/+5
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init, clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc Duy for translation. This requires splitting up the tests that the patch added so that certain parts of them can be skipped unless the C_LOCALE_OUTPUT prerequisite is satisfied. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-01Merge branch 'nd/init-gitdir'Libravatar Junio C Hamano1-0/+13
* nd/init-gitdir: init, clone: support --separate-git-dir for .git file git-init.txt: move description section up Conflicts: builtin/clone.c
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-1/+1
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-19init, clone: support --separate-git-dir for .git fileLibravatar Nguyễn Thái Ngọc Duy1-0/+13
--separate-git-dir tells git to create git dir at the specified location, instead of where it is supposed to be. A .git file that points to that location will be put in place so that it appears normal to repo discovery process. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-15config: drop support for GIT_CONFIG_NOGLOBALLibravatar Jonathan Nieder1-1/+0
Now that test-lib sets $HOME to protect against pollution from user settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test suite any more. And as luck would have it, a quick code search reveals no other users in the wild. This patch does not affect GIT_CONFIG_NOSYSTEM, which is still needed. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-clone "Cloning into" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-04Merge branch 'ab/test-2'Libravatar Junio C Hamano1-2/+0
* ab/test-2: (51 commits) tests: factor HOME=$(pwd) in test-lib.sh test-lib: use subshell instead of cd $new && .. && cd $old tests: simplify "missing PREREQ" message t/t0000-basic.sh: Run the passing TODO test inside its own test-lib test-lib: Allow overriding of TEST_DIRECTORY test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../ test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../ test: Introduce $GIT_BUILD_DIR cvs tests: do not touch test CVS repositories shipped with source t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite t/t7105-reset-patch.sh: Add a PERL prerequisite t/t9001-send-email.sh: convert setup code to tests t/t9001-send-email.sh: change from skip_all=* to prereq skip t/t9001-send-email.sh: Remove needless PROG=* assignment t/t9600-cvsimport.sh: change from skip_all=* to prereq skip lib-patch-mode tests: change from skip_all=* to prereq skip t/t3701-add-interactive.sh: change from skip_all=* to prereq skip tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh t/Makefile: Create test-results dir for smoke target ... Conflicts: t/t6035-merge-dir-to-symlink.sh
2010-08-31tests: factor HOME=$(pwd) in test-lib.shLibravatar Matthieu Moy1-2/+0
The same pattern is used in many tests, and makes it easy for new ones to rely on $HOME being a trashable, clean, directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25Do not unquote + into ' ' in URLsLibravatar Thomas Rast1-2/+8
Since 9d2e942 (decode file:// and ssh:// URLs, 2010-05-23) the URL logic unquotes escaped URLs. For the %2B type of escape, this is conformant with RFC 2396. However, it also unquotes + into a space character, which is only appropriate for the query strings in HTTP. This notably broke fetching from the gtk+ repository. We cannot just remove the corresponding code since the same url_decode_internal() is also used by the HTTP backend to decode query parameters. Introduce a new argument that controls whether the + decoding happens, and use it only in the (client-side) url_decode(). Reported-by: Jasper St. Pierre <jstpierre@mecheye.net> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24decode file:// and ssh:// URLsLibravatar Jeff King1-0/+12
We generally treat these as equivalent to "/path/to/repo" and "host:path_to_repo" respectively. However, they are URLs and as such may be percent-encoded. The current code simply uses them as-is without any decoding. With this patch, we will now percent-decode any file:// or ssh:// url (or ssh+git, git+ssh, etc) at the transport layer. We continue to treat plain paths and "host:path" syntax literally. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-04clone: quell the progress report from init and report on cloneLibravatar Junio C Hamano1-1/+1
Currently, a local git clone reports only initializing an empty git dir, which is potentially confusing. Instead, report that cloning is in progress and when it is done (unless -q) is given, and suppress the init report. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-02Merge branch 'maint-1.6.2' into maint-1.6.3Libravatar Junio C Hamano1-2/+4
* maint-1.6.2: clone: disconnect transport after fetching
2009-09-02clone: disconnect transport after fetchingLibravatar Jeff King1-2/+4
The current code just leaves the transport in whatever state it was in after performing the fetch. For a non-empty clone over the git protocol, the transport code already disconnects at the end of the fetch. But for an empty clone, we leave the connection hanging, and eventually close the socket when clone exits. This causes the remote upload-pack to complain "the remote end hung up unexpectedly". While this message is harmless to the clone itself, it is unnecessarily scary for a user to see and may pollute git-daemon logs. This patch just explicitly calls disconnect after we are done with the remote end, which sends a flush packet to upload-pack and cleanly disconnects, avoiding the error message. Other transports are unaffected or slightly improved: - for a non-empty repo over the git protocol, the second disconnect is a no-op (since we are no longer connected) - for "walker" transports (like HTTP or FTP), we actually free some used memory (which previously just sat until the clone process exits) - for "rsync", disconnect is always a no-op anyway Signed-off-by: Jeff King <peff@peff.net> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-03Make git-clone respect branch.autosetuprebaseLibravatar Junio C Hamano1-0/+15
When git-clone creates an initial branch it was not checking the branch.autosetuprebase configuration option (which may exist in ~/.gitconfig). Refactor the code used by "git branch" to create a new branch, and use it instead of the insufficiently duplicated code in builtin-clone. Changes are partly, and the test is mostly, based on the previous work by Pat Notz. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-12Install the default "master" branch configuration after cloning a voidLibravatar Junio C Hamano1-0/+15
After "cloning from an empty repository", we have a configuration to describe the remote's URL and the default ref mappings, but we lack the branch configuration for the default branch we create on our end, "master". It is likely that the empty repository we cloned from will point the default "master" branch with its HEAD, so prepare the local configuration to match. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11Allow cloning to an existing empty directoryLibravatar Alexander Potashev1-0/+19
The die() message updated accordingly. The previous behaviour was to only allow cloning when the destination directory doesn't exist. [jc: added trivial tests] Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03clone: fix creation of explicitly named target directoryLibravatar Clemens Buchacher1-0/+18
'git clone <repo> path/' (note the trailing slash) fails, because the entire path is interpreted as leading directories. So when mkdir tries to create the actual path, it already exists. This makes sure trailing slashes are removed. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-07clone --mirror: avoid storing repeated tagsLibravatar Johannes Schindelin1-0/+12
With --mirror, clone asks for refs/* already, so it does not need to ask for ref/tags/*, too. Noticed by Cesar Eduardo Barros. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-03Flush output in start_asyncLibravatar Anders Melchiorsen1-0/+6
This prevents double output in case stdout is redirected. Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-03clone --bare: Add ".git" suffix to the directory name to clone intoLibravatar Johannes Schindelin1-0/+7
We have a tradition that bare repositories live in directories ending in ".git". To make this more a convention than just a tradition, teach "git clone --bare" to add a ".git" suffix to the directory name. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-02clone: Add an option to set up a mirrorLibravatar Johannes Schindelin1-0/+12
The command line $ git clone --mirror $URL is now a short-hand for $ git clone --bare $URL $ (cd $(basename $URL) && git remote add --mirror origin $URL) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-08Remove unnecessary pack-*.keep file after successful git-cloneLibravatar Shawn O. Pearce1-1/+19
Once a clone is successful we no longer need to hold onto the .keep file created by the transport. Delete the file so we can later repack the complete repository. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-25clone: create intermediate directories of destination repoLibravatar Jeff King1-0/+22
The shell version used to use "mkdir -p" to create the repo path, but the C version just calls "mkdir". Let's replicate the old behavior. We have to create the git and worktree leading dirs separately; while most of the time, the worktree dir contains the git dir (as .git), the user can override this using GIT_WORK_TREE. We can reuse safe_create_leading_directories, but we need to make a copy of our const buffer to do so. Since merge-recursive uses the same pattern, we can factor this out into a global function. This has two other cleanup advantages for merge-recursive: 1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually creates bar, but this function just creates the leading directories. 2. mkdir_p took a mode argument, but it was completely ignored. Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-15builtin-clone: fix initial checkoutLibravatar Johannes Schindelin1-0/+7
Somewhere in the process of finishing up builtin-clone, the update of the working tree was lost. This was due to not using the option "merge" for unpack_trees(). Breakage noticed by Kevin Ballard. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Jeff King <peff@peff.net> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-27clone: detect and fail on excess parametersLibravatar Junio C Hamano1-0/+26
"git clone [options] $src $dst excess-garbage" simply ignored excess-garbage without giving any diagnostic message. Fix it. Signed-off-by: Junio C Hamano <gitster@pobox.com>