summaryrefslogtreecommitdiff
path: root/t/t5551-http-fetch.sh
AgeCommit message (Collapse)AuthorFilesLines
2012-09-07Merge branch 'jk/maint-http-half-auth-push'Libravatar Junio C Hamano1-0/+20
Pushing to smart HTTP server with recent Git fails without having the username in the URL to force authentication, if the server is configured to allow GET anonymously, while requiring authentication for POST. * jk/maint-http-half-auth-push: http: prompt for credentials on failed POST http: factor out http error code handling t: test http access to "half-auth" repositories t: test basic smart-http authentication t/lib-httpd: recognize */smart/* repos as smart-http t/lib-httpd: only route auth/dumb to dumb repos t5550: factor out http auth setup t5550: put auth-required repo in auth/dumb
2012-08-27t: test http access to "half-auth" repositoriesLibravatar Jeff King1-0/+9
Some sites set up http access to repositories such that fetching is anonymous and unauthenticated, but pushing is authenticated. While there are multiple ways to do this, the technique advertised in the git-http-backend manpage is to block access to locations matching "/git-receive-pack$". Let's emulate that advice in our test setup, which makes it clear that this advice does not actually work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27t: test basic smart-http authenticationLibravatar Jeff King1-0/+11
We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-04tests: Introduce test_seqLibravatar Michał Kiedrowicz1-1/+1
Jeff King wrote: The seq command is GNU-ism, and is missing at least in older BSD releases and their derivatives, not to mention antique commercial Unixes. We already purged it in b3431bc (Don't use seq in tests, not everyone has it, 2007-05-02), but a few new instances have crept in. They went unnoticed because they are in scripts that are not run by default. Replace them with test_seq that is implemented with a Perl snippet (proposed by Jeff). This is better than inlining this snippet everywhere it's needed because it's easier to read and it's easier to change the implementation (e.g. to C) if we ever decide to remove Perl from the test suite. Note that test_seq is not a complete replacement for seq(1). It just has what we need now, in addition that it makes it possible for us to do something like "test_seq a m" if we wanted to in the future. There are also many places that do `for i in 1 2 3 ...` but I'm not sure if it's worth converting them to test_seq. That would introduce running more processes of Perl. Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-24tests: enclose $PERL_PATH in double quotesLibravatar Junio C Hamano1-1/+1
Otherwise it will be split at a space after "Program" when it is set to "\\Program Files\perl" or something silly like that. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-12t: Replace 'perl' by $PERL_PATHLibravatar Vincent van Ravesteijn1-1/+1
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a few tests already actually use this variable when perl is needed. The other test just call 'perl' and it might happen that the wrong perl interpreter is used. This becomes problematic on Windows, when the perl interpreter that is compiled and installed on the Windows system is used, because this perl interpreter might introduce some unexpected LF->CRLF conversions. This patch makes sure that $PERL_PATH is used everywhere in the test suite and that the correct perl interpreter is used. Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-10remote-curl: main test case for the OS command line overflowLibravatar Ivan Todoroski1-0/+31
This is main test case for the original problem that triggered this patch series. We create a repo with 50k tags and then test whether git-clone over the smart HTTP protocol succeeds. Note that we construct the repo in a slightly different way than the original script used to reproduce the problem. This is because the original script just created 50k tags all pointing to the same commit, so if there was a bug where remote-curl.c was not passing all the refs to fetch-pack we wouldn't know. The clone would succeed even if only one tag was passed, because all the other tags were pointing at the same SHA and would be considered present. Instead we create a repo with 50k independent (dangling) commits and then tag each of those commits with a unique tag. This way if one of the tags is not given to fetch-pack, later stages of the clone would complain about it. This allows us to test both that the command line overflow was fixed, as well as that it was fixed in a way that doesn't leave out any of the refs. Signed-off-by: Ivan Todoroski <grnch@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-27smart-http: Don't change POST to GET when following redirectLibravatar Tay Ray Chuan1-0/+8
For a long time (29508e1 "Isolate shared HTTP request functionality", Fri Nov 18 11:02:58 2005), we've followed HTTP redirects with CURLOPT_FOLLOWLOCATION. However, when the remote HTTP server returns a redirect the default libcurl action is to change a POST request into a GET request while following the redirect, but the remote http backend does not expect that. Fix this by telling libcurl to always keep the request as type POST with CURLOPT_POSTREDIR. For users of libcurl older than 7.19.1, use CURLOPT_POST301 instead, which only follows 301s instead of both 301s and 302s. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-1/+1
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12remote-curl: Fix Accept header for smart HTTP connectionsLibravatar Shawn O. Pearce1-1/+1
We actually expect to see an application/x-git-upload-pack-result but we lied and said we Accept *-response. This was a typo on my part when I was writing the code. Fortunately the wrong Accept header had no real impact, as the deployed git-http-backend servers were not testing the Accept header before they returned their content. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-09t5551-http-fetch: Work around broken Accept header in libcurlLibravatar Shawn O. Pearce1-0/+3
Unfortunately at least one version of libcurl has a bug causing it to include "Accept: */*" in the same POST request where we have already asked for "Accept: application/x-git-upload-pack-response". This is a bug in libcurl, not Git, or our test vector. The application has explicitly asked the server for a single content type, but libcurl has mistakenly also told the server the client application will accept */*, which is any content type. Based on the libcurl change log, this "Accept: */*" header bug may have been fixed in version 7.18.1 released March 30, 2008: http://curl.haxx.se/changes.html#7_18_1 Rather than require users to upgrade libcurl we change the test vector to trim this line out of the 2nd request. Reported-by: Tarmigan <tarmigan+git@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-09t5551-http-fetch: Work around some libcurl versionsLibravatar Shawn O. Pearce1-4/+4
Some versions of libcurl report their output when GIT_CURL_VERBOSE is set differently than other versions do. At least one variant (version unknown but likely pre-7.18.1) reports the POST payload to stderr, and omits the blank line after each HTTP request/response. We clip these lines out of the stderr output now before doing the compare, so we aren't surprised by this trivial difference. Reported-by: Tarmigan <tarmigan+git@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-04test smart http fetch and pushLibravatar Shawn O. Pearce1-0/+102
The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>