summaryrefslogtreecommitdiff
path: root/t/t5550-http-fetch-dumb.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-01-04t/t5550-http-fetch-dumb.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-4/+4
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22Merge branch 'jk/skip-http-tests-under-no-curl'Libravatar Junio C Hamano1-6/+0
Test clean-up. * jk/skip-http-tests-under-no-curl: tests: skip dav http-push tests under NO_EXPAT=NoThanks t/lib-httpd.sh: skip tests if NO_CURL is defined
2015-05-07t/lib-httpd.sh: skip tests if NO_CURL is definedLibravatar Jeff King1-6/+0
If we built git without curl, we can't actually test against an http server. In fact, all of the test scripts which include lib-httpd.sh already perform this check, with one exception: t5540. For those scripts, this is a noop, and for t5540, this is a bugfix (it used to fail when built with NO_CURL, though it could go unnoticed if you had a stale git-remote-https in your build directory). Noticed-by: Junio C Hamano <junio@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: use test_might_fail for diff and grepLibravatar Jeff King1-2/+2
Some tests run diff or grep to produce an output, and then compare the output to an expected value. We know the exit code we expect these processes to have (e.g., grep yields 0 if it produced output and 1 otherwise), so it would not make the test wrong to look for it. But the difference between their output and the expected output (e.g., shown by test_cmp) is much more useful to somebody debugging the test than the test just bailing out. These tests break the &&-chain to skip the exit-code check of the process. However, we can get the same effect by using test_might_fail. Note that in some cases the test did use "|| return 1", which meant the test was not wrong, but it did fool --chain-lint. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-18Merge branch 'ye/http-accept-language'Libravatar Junio C Hamano1-0/+42
Using environment variable LANGUAGE and friends on the client side, HTTP-based transports now send Accept-Language when making requests. * ye/http-accept-language: http: add Accept-Language header if possible
2015-02-17Merge branch 'jk/dumb-http-idx-fetch-fix'Libravatar Junio C Hamano1-0/+18
A broken pack .idx file in the receiving repository prevented the dumb http transport from fetching a good copy of it from the other side. * jk/dumb-http-idx-fetch-fix: dumb-http: do not pass NULL path to parse_pack_index
2015-01-28http: add Accept-Language header if possibleLibravatar Yi EungJun1-0/+42
Add an Accept-Language header which indicates the user's preferred languages defined by $LANGUAGE, $LC_ALL, $LC_MESSAGES and $LANG. Examples: LANGUAGE= -> "" LANGUAGE=ko:en -> "Accept-Language: ko, en;q=0.9, *;q=0.1" LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *;q=0.1" LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *;q=0.1" This gives git servers a chance to display remote error messages in the user's preferred language. Limit the number of languages to 1,000 because q-value must not be smaller than 0.001, and limit the length of Accept-Language header to 4,000 bytes for some HTTP servers which cannot accept such long header. Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-27dumb-http: do not pass NULL path to parse_pack_indexLibravatar Jeff King1-0/+18
Once upon a time, dumb http always fetched .idx files directly into their final location, and then checked their validity with parse_pack_index. This was refactored in commit 750ef42 (http-fetch: Use temporary files for pack-*.idx until verified, 2010-04-19), which uses the following logic: 1. If we have the idx already in place, see if it's valid (using parse_pack_index). If so, use it. 2. Otherwise, fetch the .idx to a tempfile, check that, and if so move it into place. 3. Either way, fetch the pack itself if necessary. However, it got step 1 wrong. We pass a NULL path parameter to parse_pack_index, so an existing .idx file always looks broken. Worse, we do not treat this broken .idx as an opportunity to re-fetch, but instead return an error, ignoring the pack entirely. This can lead to a dumb-http fetch failing to retrieve the necessary objects. This doesn't come up much in practice, because it must be a packfile that we found out about (and whose .idx we stored) during an earlier dumb-http fetch, but whose packfile we _didn't_ fetch. I.e., we did a partial clone of a repository, didn't need some packfiles, and now a followup fetch needs them. Discovery and tests by Charles Bailey <charles@hashpling.org>. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-17http: fix charset detection of extract_content_type()Libravatar Yi EungJun1-0/+5
extract_content_type() could not extract a charset parameter if the parameter is not the first one and there is a whitespace and a following semicolon just before the parameter. For example: text/plain; format=fixed ;charset=utf-8 And it also could not handle correctly some other cases, such as: text/plain; charset=utf-8; format=fixed text/plain; some-param="a long value with ;semicolons;"; charset=utf-8 Thanks-to: Jeff King <peff@peff.net> Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-27remote-curl: reencode http error messagesLibravatar Jeff King1-0/+5
We currently recognize an error message with a content-type "text/plain; charset=utf-16" as text, but we ignore the charset parameter entirely. Let's encode it to log_output_encoding, which is presumably something the user's terminal can handle. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-27http: extract type/subtype portion of content-typeLibravatar Jeff King1-0/+5
When we get a content-type from curl, we get the whole header line, including any parameters, and without any normalization (like downcasing or whitespace) applied. If we later try to match it with strcmp() or even strcasecmp(), we may get false negatives. This could cause two visible behaviors: 1. We might fail to recognize a smart-http server by its content-type. 2. We might fail to relay text/plain error messages to users (especially if they contain a charset parameter). This patch teaches the http code to extract and normalize just the type/subtype portion of the string. This is technically passing out less information to the callers, who can no longer see the parameters. But none of the current callers cares, and a future patch will add back an easier-to-use method for accessing those parameters. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-23t5550: test display of remote http error messagesLibravatar Jeff King1-0/+10
Since commit 426e70d (remote-curl: show server content on http errors, 2013-04-05), we relay any text/plain error messages from the remote server to the user. However, we never tested it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-10test: rename http fetch and push test filesLibravatar Nguyễn Thái Ngọc Duy1-0/+175
Make clear which one is for dumb protocol, which one is for smart from their file name. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>