| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We have been passing enough information to enable the
compare-and-swap logic down to the transport layer, but the
transport helper was not passing it to smart-http transport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
|
|
When setting up a "half-auth" repository in which reads can
be done anonymously but writes require authentication, it is
best if the server can require authentication for both the
ref advertisement and the actual receive-pack POSTs. This
alleviates the need for the admin to set http.receivepack in
the repositories, and means that the client is challenged
for credentials immediately, instead of partway through the
push process (and git clients older than v1.7.11.7 had
trouble handling these challenges).
Since detecting a push during the ref advertisement requires
matching the query string, and this is non-trivial to do in
Apache, we have traditionally punted and instructed users to
just protect "/git-receive-pack$". This patch provides the
mod_rewrite recipe to actually match the ref advertisement,
which is preferred.
While we're at it, let's add the recipe to our test scripts
so that we can be sure that it works, and doesn't get broken
(either by our changes or by changes in Apache).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
|
|
In the next major release, we will switch "git push [$there]" that
does not say what to push from the traditional "matching" to the
updated "simple" semantics, that pushes the current branch to the
branch with the same name only when the current branch is set to
integrate with that remote branch (all other cases will error out).
* mm/push-default-switch-warning:
push: start warning upcoming default change for push.default
|
|
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit
986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some sites set up http access to repositories such that
fetching is anonymous and unauthenticated, but pushing is
authenticated. While there are multiple ways to do this, the
technique advertised in the git-http-backend manpage is to
block access to locations matching "/git-receive-pack$".
Let's emulate that advice in our test setup, which makes it
clear that this advice does not actually work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not currently test authentication over smart-http at
all. In theory, it should work exactly as it does for dumb
http (which we do test). It does indeed work for these
simple tests, but this patch lays the groundwork for more
complex tests in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for flipping the default to the "simple" mode from
the "matching" mode that is the historical default, start warning
users when they rely on unconfigured "git push" to default to the
"matching" mode.
Also, advertise for 'simple' where 'current' and 'upstream' are advised.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
|
|
By Jeff King
* jk/http-backend-keep-committer-ident-env:
http-backend: respect existing GIT_COMMITTER_* variables
Conflicts:
t/t5541-http-push.sh
|
|
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
|
|
"git push" over smart-http lost progress output and this resurrects it.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
|
|
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
|
|
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The http-backend program sets default GIT_COMMITTER_NAME and
GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and
REMOTE_ADDR variables provided by the webserver. However, it
unconditionally overwrites any existing GIT_COMMITTER
variables, which may have been customized by site-specific
code in the webserver (or in a script wrapping http-backend).
Let's leave those variables intact if they already exist,
assuming that any such configuration was intentional. There
is a slight chance of a regression if somebody has set
GIT_COMMITTER_* for the entire webserver, not intending it
to leak through http-backend. We could protect against this
by passing the information in alternate variables. However,
it seems unlikely that anyone will care about that
regression, and there is value in the simplicity of using
the common variable names that are used elsewhere in git.
While we're tweaking the environment-handling in
http-backend, let's switch it to use argv_array to handle
the list of variables. That makes the memory management much
simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
|
|
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
|
|
Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/smart-http-failure-to-push:
remote-curl: Fix push status report when all branches fail
|
|
* sp/smart-http-failure-to-push:
remote-curl: Fix push status report when all branches fail
|
|
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
lib-terminal.sh runs a test and thus increases the test count, but the
output is lost so that TAP produces a "no plan found error".
Move the lib-terminal call after the lib-httpd and make TAP happy
(though still leave me clueless).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When receive-pack advertises its list of refs, it generally hides the
capabilities information after a NUL at the end of the first ref.
However, when we have an empty repository, there are no refs, and
therefore receive-pack writes a fake ref "capabilities^{}" with the
capabilities afterwards.
On the client side, git reads the result with get_remote_heads(). We pick
the capabilities from the end of the line, and then call check_ref() to
make sure the ref name is valid. We see that it isn't, and don't bother
adding it to our list of refs.
However, the call to check_ref() is enabled by passing the REF_NORMAL flag
to get_remote_heads. For the regular git transport, we pass REF_NORMAL in
get_refs_via_connect() if we are doing a push (since only receive-pack
uses this fake ref). But in remote-curl, we never use this flag, and we
accept the fake ref as a real one, passing it back from the helper to the
parent git-push.
Most of the time this bug goes unnoticed, as the fake ref won't match our
refspecs. However, if "--mirror" is used, then we see it as remote cruft
to be pruned, and try to pass along a deletion refspec for it. Of course
this refspec has bogus syntax (because of the ^{}), and the helper
complains, aborting the push.
Let's have remote-curl mirror what the builtin get_refs_via_connect() does
(at least for the case of using git protocol; we can leave the dumb
info/refs reader as it is).
This also fixes pushing with --mirror to a smart-http remote that uses
alternates. The fake ".have" refs the server gives to avoid unnecessary
network transfer has a similar bad interactions with the machinery.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dm/http-cleanup:
t5541-http-push: add test for chunked
http-push: refactor curl_easy_setup madness
http-push: use const for strings in signatures
http: make curl callbacks match contracts from curl header
|
|
Trigger the chunked type of pushing for smart HTTP. This can serve as a
regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS
when initializing a slot).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7012 and t7060
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
|
|
Previously, we blindly assumed that URLs passed to the remote-curl
helper did not end with a trailing slash.
Use the convenience function end_url_with_slash() from http.[ch] to
ensure that URLs have a trailing slash on invocation of the remote-curl
helper, and use the URL as one with a trailing slash throughout.
It is possible for users to pass a URL with a trailing slash to
remote-curl, by, say, setting it in remote.<name>.url in their git
config. The resulting requests have an empty path component (//) and may
break implementations of the http git protocol.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't feed a multiple-line pattern to grep and expect the them to match
with lines in order.
Simplify the grep expressions in the non-fast-forward tests to check
only for the first line of the non-fast-forward warning - having that
line should be enough assurance that the full warning is printed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
to be pushed
If the status of a ref is REF_STATUS_NONE, the remote helper will not
be told to push the ref (via a 'push' command).
However, the remote helper may still act on these refs.
If the helper does act on the ref, and prints a status for it, ignore
the report (ie. don't overwrite the status of the ref with it, nor the
message in the remote_status member) if the reported status is 'no
match'.
This allows the user to be alerted to more "interesting" ref statuses,
like REF_STATUS_NONFASTFORWARD.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use push_had_errors() to check the refs for errors and modify the
return value.
Mark the non-fast-forward push tests to succeed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic that detects up-to-date and non-fast-forward refs to a
new function in remote.[ch], set_ref_status_for_push().
Make transport_push() invoke set_ref_status_for_push() before invoking
the push_refs() implementation. (As a side-effect, the push_refs()
implementation in transport-helper.c now knows of non-fast-forward
pushes.)
Removed logic for detecting up-to-date refs from the push_refs()
implementation in transport-helper.c, as transport_push() has already
done so for it.
Make cmd_send_pack() invoke set_ref_status_for_push() before invoking
send_pack(), as transport_push() can't do it for send_pack() here.
Mark the test on the return status of non-fast-forward push to fail.
Git now exits with success, as transport.c::transport_push() does not
check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it
indicate rejected pushes with its return value.
Mark the test for ref status to succeed. As mentioned earlier, refs
might be marked as non-fast-forwards, triggering the push status
printing mechanism in transport.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some refs can only be matched to a remote ref with an explicit refspec.
When such a ref is a non-fast-forward of its remote ref, test that
pushing them (with the explicit refspec specified) fails with a non-
fast-foward-type error (viz. printing of ref status and help message).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The top level directory "/smart/" of the test Apache server is mapped
through our git-http-backend CGI, but uses the same underlying
repository space as the server's document root. This is the most
simple installation possible.
Server logs are checked to verify the client has accessed only the
smart URLs during the test. During fetch testing the headers are
also logged from libcurl to ensure we are making a reasonably sane
HTTP request, and getting back reasonably sane response headers
from the CGI.
When validating the request headers used during smart fetch we munge
away the actual Content-Length and replace it with the placeholder
"xxx". This avoids unnecessary varability in the test caused by
an unrelated change in the requested capabilities in the first want
line of the request. However, we still want to look for and verify
that Content-Length was used, because smaller payloads should be
using Content-Length and not "Transfer-Encoding: chunked".
When validating the server response headers we must discard both
Content-Length and Transfer-Encoding, as Apache2 can use either
format to return our response.
During development of this test I observed Apache returning both
forms, depending on when the processes got CPU time. If our CGI
returned the pack data quickly, Apache just buffered the whole
thing and returned a Content-Length. If our CGI took just a bit
too long to complete, Apache flushed its buffer and instead used
"Transfer-Encoding: chunked".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Yann Droneaud
Matthieu Moy
Christopher Tiwald
Clemens Buchacher
Shawn O. Pearce
Michael J Gruber
Tay Ray Chuan
Ævar Arnfjörð Bjarmason
Brandon Casey