summaryrefslogtreecommitdiff
path: root/t/t5541-http-push.sh
AgeCommit message (Collapse)AuthorFilesLines
2012-08-27Merge branch 'mm/push-default-switch-warning'Libravatar Junio C Hamano1-1/+4
In the next major release, we will switch "git push [$there]" that does not say what to push from the traditional "matching" to the updated "simple" semantics, that pushes the current branch to the branch with the same name only when the current branch is set to integrate with that remote branch (all other cases will error out). * mm/push-default-switch-warning: push: start warning upcoming default change for push.default
2012-06-24push: start warning upcoming default change for push.defaultLibravatar Matthieu Moy1-1/+4
In preparation for flipping the default to the "simple" mode from the "matching" mode that is the historical default, start warning users when they rely on unconfigured "git push" to default to the "matching" mode. Also, advertise for 'simple' where 'current' and 'upstream' are advised. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03Merge branch 'jk/maint-push-progress'Libravatar Junio C Hamano1-2/+25
"git push" over smart-http lost progress output and this resurrects it. By Jeff King * jk/maint-push-progress: t5541: test more combinations of --progress teach send-pack about --[no-]progress send-pack: show progress when isatty(2)
2012-05-01t5541: test more combinations of --progressLibravatar Jeff King1-2/+25
Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-20Merge branch 'ct/advise-push-default'Libravatar Junio C Hamano1-1/+1
Break down the cases in which "git push" fails due to non-ff into three categories, and give separate advise messages for each case. By Christopher Tiwald (2) and Jeff King (1) * ct/advise-push-default: Fix httpd tests that broke when non-ff push advice changed clean up struct ref's nonfastforward field push: Provide situational hints for non-fast-forward errors
2012-04-12Fix httpd tests that broke when non-ff push advice changedLibravatar Christopher Tiwald1-1/+1
Signed-off-by: Christopher Tiwald <christiwald@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30http-backend: respect existing GIT_COMMITTER_* variablesLibravatar Jeff King1-0/+21
The http-backend program sets default GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and REMOTE_ADDR variables provided by the webserver. However, it unconditionally overwrites any existing GIT_COMMITTER variables, which may have been customized by site-specific code in the webserver (or in a script wrapping http-backend). Let's leave those variables intact if they already exist, assuming that any such configuration was intentional. There is a slight chance of a regression if somebody has set GIT_COMMITTER_* for the entire webserver, not intending it to leak through http-backend. We could protect against this by passing the information in alternate variables. However, it seems unlikely that anyone will care about that regression, and there is value in the simplicity of using the common variable names that are used elsewhere in git. While we're tweaking the environment-handling in http-backend, let's switch it to use argv_array to handle the list of variables. That makes the memory management much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-21Merge branch 'cb/maint-t5541-make-server-port-portable' into maintLibravatar Junio C Hamano1-1/+1
* cb/maint-t5541-make-server-port-portable: t5541: check error message against the real port number used
2012-02-20Merge branch 'cb/maint-t5541-make-server-port-portable'Libravatar Junio C Hamano1-1/+1
* cb/maint-t5541-make-server-port-portable: t5541: check error message against the real port number used
2012-02-13t5541: check error message against the real port number usedLibravatar Clemens Buchacher1-1/+1
Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-05Merge branch 'sp/smart-http-failure-to-push' into maintLibravatar Junio C Hamano1-0/+28
* sp/smart-http-failure-to-push: remote-curl: Fix push status report when all branches fail
2012-01-29Merge branch 'sp/smart-http-failure-to-push'Libravatar Junio C Hamano1-0/+28
* sp/smart-http-failure-to-push: remote-curl: Fix push status report when all branches fail
2012-01-20remote-curl: Fix push status report when all branches failLibravatar Shawn O. Pearce1-0/+28
The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08t5541: avoid TAP test miscountingLibravatar Michael J Gruber1-1/+1
lib-terminal.sh runs a test and thus increases the test count, but the output is lost so that TAP produces a "no plan found error". Move the lib-terminal call after the lib-httpd and make TAP happy (though still leave me clueless). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08fix push --quiet: add 'quiet' capability to receive-packLibravatar Clemens Buchacher1-0/+8
Currently, git push --quiet produces some non-error output, e.g.: $ git push --quiet Unpacking objects: 100% (3/3), done. This fixes a bug reported for the fedora git package: https://bugzilla.redhat.com/show_bug.cgi?id=725593 Reported-by: Jesse Keating <jkeating@redhat.com> Cc: Todd Zullinger <tmz@pobox.com> Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack) introduced the --quiet option to receive-pack and made send-pack pass that option. Older versions of receive-pack do not recognize the option, however, and terminate immediately. The commit was therefore reverted. This change instead adds a 'quiet' capability to receive-pack, which is a backwards compatible. In addition, this fixes push --quiet via http: A verbosity of 0 means quiet for remote helpers. Reported-by: Tobias Ulmer <tobiasu@tmux.org> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-19remote-curl: don't pass back fake refsLibravatar Jeff King1-0/+32
When receive-pack advertises its list of refs, it generally hides the capabilities information after a NUL at the end of the first ref. However, when we have an empty repository, there are no refs, and therefore receive-pack writes a fake ref "capabilities^{}" with the capabilities afterwards. On the client side, git reads the result with get_remote_heads(). We pick the capabilities from the end of the line, and then call check_ref() to make sure the ref name is valid. We see that it isn't, and don't bother adding it to our list of refs. However, the call to check_ref() is enabled by passing the REF_NORMAL flag to get_remote_heads. For the regular git transport, we pass REF_NORMAL in get_refs_via_connect() if we are doing a push (since only receive-pack uses this fake ref). But in remote-curl, we never use this flag, and we accept the fake ref as a real one, passing it back from the helper to the parent git-push. Most of the time this bug goes unnoticed, as the fake ref won't match our refspecs. However, if "--mirror" is used, then we see it as remote cruft to be pruned, and try to pass along a deletion refspec for it. Of course this refspec has bogus syntax (because of the ^{}), and the helper complains, aborting the push. Let's have remote-curl mirror what the builtin get_refs_via_connect() does (at least for the case of using git protocol; we can leave the dumb info/refs reader as it is). This also fixes pushing with --mirror to a smart-http remote that uses alternates. The fake ".have" refs the server gives to avoid unnecessary network transfer has a similar bad interactions with the machinery. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-11Merge branch 'dm/http-cleanup'Libravatar Junio C Hamano1-2/+16
* dm/http-cleanup: t5541-http-push: add test for chunked http-push: refactor curl_easy_setup madness http-push: use const for strings in signatures http: make curl callbacks match contracts from curl header
2011-05-04t5541-http-push: add test for chunkedLibravatar Tay Ray Chuan1-2/+16
Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, ↵Libravatar Junio C Hamano1-2/+2
t7012 and t7060 Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-push "prevent you from losing" messageLibravatar Ævar Arnfjörð Bjarmason1-2/+5
Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20t/{t5541,lib-httpd}: replace problematic '!()' notation with test_must_failLibravatar Brandon Casey1-1/+1
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man page describe it as follows: !(pattern-list) Matches anything except one of the given patterns. Ksh performs a file glob using the pattern-list and then tries to execute the first file in the list. If a space is added between the '!' and the open parens, then Ksh will not interpret it as a pattern list, but in this case, it is preferred to use test_must_fail, so lets do so. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-1/+1
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-08Merge branch 'rc/maint-curl-helper'Libravatar Junio C Hamano1-1/+28
* rc/maint-curl-helper: remote-curl: ensure that URLs have a trailing slash http: make end_url_with_slash() public t5541-http-push: add test for URLs with trailing slash Conflicts: remote-curl.c
2010-04-09remote-curl: ensure that URLs have a trailing slashLibravatar Tay Ray Chuan1-1/+1
Previously, we blindly assumed that URLs passed to the remote-curl helper did not end with a trailing slash. Use the convenience function end_url_with_slash() from http.[ch] to ensure that URLs have a trailing slash on invocation of the remote-curl helper, and use the URL as one with a trailing slash throughout. It is possible for users to pass a URL with a trailing slash to remote-curl, by, say, setting it in remote.<name>.url in their git config. The resulting requests have an empty path component (//) and may break implementations of the http git protocol. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-09t5541-http-push: add test for URLs with trailing slashLibravatar Tay Ray Chuan1-1/+28
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02t554[01]-http-push: refactor, add non-ff testsLibravatar Tay Ray Chuan1-22/+2
Move non-fast forward tests to lib-httpd.sh so that we don't have to duplicate the tests in both t5540 and t5541. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02t5541-http-push: check that ref is unchanged for non-ff testLibravatar Tay Ray Chuan1-2/+4
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25t5541-http-push: make grep expression check for one line onlyLibravatar Tay Ray Chuan1-8/+4
Don't feed a multiple-line pattern to grep and expect the them to match with lines in order. Simplify the grep expressions in the non-fast-forward tests to check only for the first line of the non-fast-forward warning - having that line should be enough assurance that the full warning is printed. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-09transport-helper.c::push_refs(): ignore helper-reported status if ref is not ↵Libravatar Tay Ray Chuan1-1/+1
to be pushed If the status of a ref is REF_STATUS_NONE, the remote helper will not be told to push the ref (via a 'push' command). However, the remote helper may still act on these refs. If the helper does act on the ref, and prints a status for it, ignore the report (ie. don't overwrite the status of the ref with it, nor the message in the remote_status member) if the reported status is 'no match'. This allows the user to be alerted to more "interesting" ref statuses, like REF_STATUS_NONFASTFORWARD. Cc: Jeff King <peff@peff.net> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-09transport.c::transport_push(): make ref status affect return valueLibravatar Tay Ray Chuan1-2/+2
Use push_had_errors() to check the refs for errors and modify the return value. Mark the non-fast-forward push tests to succeed. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-09refactor ref status logic for pushingLibravatar Tay Ray Chuan1-2/+2
Move the logic that detects up-to-date and non-fast-forward refs to a new function in remote.[ch], set_ref_status_for_push(). Make transport_push() invoke set_ref_status_for_push() before invoking the push_refs() implementation. (As a side-effect, the push_refs() implementation in transport-helper.c now knows of non-fast-forward pushes.) Removed logic for detecting up-to-date refs from the push_refs() implementation in transport-helper.c, as transport_push() has already done so for it. Make cmd_send_pack() invoke set_ref_status_for_push() before invoking send_pack(), as transport_push() can't do it for send_pack() here. Mark the test on the return status of non-fast-forward push to fail. Git now exits with success, as transport.c::transport_push() does not check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it indicate rejected pushes with its return value. Mark the test for ref status to succeed. As mentioned earlier, refs might be marked as non-fast-forwards, triggering the push status printing mechanism in transport.c. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-09t5541-http-push.sh: add test for unmatched, non-fast-forwarded refsLibravatar Tay Ray Chuan1-0/+21
Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-09t5541-http-push.sh: add tests for non-fast-forward pushesLibravatar Tay Ray Chuan1-0/+23
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-04test smart http fetch and pushLibravatar Shawn O. Pearce1-0/+92
The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>