summaryrefslogtreecommitdiff
path: root/t/t5541-http-push-smart.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-07-01t5541: become resilient to GETTEXT_POISONLibravatar Vasco Almeida1-6/+6
Use test_i18n* functions for testing text already marked for translation. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22Merge branch 'jk/skip-http-tests-under-no-curl'Libravatar Junio C Hamano1-5/+0
Test clean-up. * jk/skip-http-tests-under-no-curl: tests: skip dav http-push tests under NO_EXPAT=NoThanks t/lib-httpd.sh: skip tests if NO_CURL is defined
2015-05-07t/lib-httpd.sh: skip tests if NO_CURL is definedLibravatar Jeff King1-5/+0
If we built git without curl, we can't actually test against an http server. In fact, all of the test scripts which include lib-httpd.sh already perform this check, with one exception: t5540. For those scripts, this is a noop, and for t5540, this is a bugfix (it used to fail when built with NO_CURL, though it could go unnoticed if you had a stale git-remote-https in your build directory). Noticed-by: Junio C Hamano <junio@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-26Merge branch 'jk/test-chain-lint'Libravatar Junio C Hamano1-1/+1
People often forget to chain the commands in their test together with &&, leaving a failure from an earlier command in the test go unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to catch such a mistake more easily. * jk/test-chain-lint: (36 commits) t9001: drop save_confirm helper t0020: use test_* helpers instead of hand-rolled messages t: simplify loop exit-code status variables t: fix some trivial cases of ignored exit codes in loops t7701: fix ignored exit code inside loop t3305: fix ignored exit code inside loop t0020: fix ignored exit code inside loops perf-lib: fix ignored exit code inside loop t6039: fix broken && chain t9158, t9161: fix broken &&-chain in git-svn tests t9104: fix test for following larger parents t4104: drop hand-rolled error reporting t0005: fix broken &&-chains t7004: fix embedded single-quotes t0050: appease --chain-lint t9001: use test_when_finished t4117: use modern test_* helpers t6034: use modern test_* helpers t1301: use modern test_* helpers t0020: use modern test_* helpers ...
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-12t5541: move run_with_cmdline_limit to test-lib.shLibravatar Jeff King1-6/+0
We use this to test http pushing with a restricted commandline. Other scripts (like t5551, which does http fetching) will want to use it, too. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-08Merge branch 'jc/push-cert'Libravatar Junio C Hamano1-0/+41
Allow "git push" request to be signed, so that it can be verified and audited, using the GPG signature of the person who pushed, that the tips of branches at a public repository really point the commits the pusher wanted to, without having to "trust" the server. * jc/push-cert: (24 commits) receive-pack::hmac_sha1(): copy the entire SHA-1 hash out signed push: allow stale nonce in stateless mode signed push: teach smart-HTTP to pass "git push --signed" around signed push: fortify against replay attacks signed push: add "pushee" header to push certificate signed push: remove duplicated protocol info send-pack: send feature request on push-cert packet receive-pack: GPG-validate push certificates push: the beginning of "git push --signed" pack-protocol doc: typofix for PKT-LINE gpg-interface: move parse_signature() to where it should be gpg-interface: move parse_gpg_output() to where it should be send-pack: clarify that cmds_sent is a boolean send-pack: refactor inspecting and resetting status and sending commands send-pack: rename "new_refs" to "need_pack_data" receive-pack: factor out capability string generation send-pack: factor out capability string generation send-pack: always send capabilities send-pack: refactor decision to send update per ref send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher ...
2014-09-17signed push: allow stale nonce in stateless modeLibravatar Junio C Hamano1-2/+7
When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-17signed push: teach smart-HTTP to pass "git push --signed" aroundLibravatar Junio C Hamano1-0/+36
The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26send-pack: take refspecs over stdinLibravatar Jeff King1-0/+15
Pushing a large number of refs works over most transports, because we implement send-pack as an internal function. However, it can sometimes fail when pushing over http, because we have to spawn "git send-pack --stateless-rpc" to do the heavy lifting, and we pass each refspec on the command line. This can cause us to overflow the OS limits on the size of the command line for a large push. We can solve this by giving send-pack a --stdin option and using it from remote-curl. We already dealt with this on the fetch-pack side in 078b895 (fetch-pack: new --stdin option to read refs from stdin, 2012-04-02). The stdin option (and in particular, its use of packet-lines for stateless-rpc input) is modeled after that solution. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-10test: rename http fetch and push test filesLibravatar Nguyễn Thái Ngọc Duy1-0/+327
Make clear which one is for dumb protocol, which one is for smart from their file name. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>