| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When reset_repository_shallow() is called, Git clears its cache of
shallow information, so that if shallow information is re-requested, Git
will read fresh data from disk instead of reusing its stale cached data.
However, the cache of commit grafts is not likewise cleared, even though
there are commit grafts created from shallow information.
This means that if on-disk shallow information were to be updated and
then a commit-graft-using codepath were run (for example, a revision
walk), Git would be using stale commit graft information. This can be
seen from the test in this patch, in which Git performs a revision walk
(to check for changed submodules) after a fetch with --update-shallow.
Therefore, clear the cache of commit grafts whenever
reset_repository_shallow() is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
|
|
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix in-core inconsistency after fetching into a shallow repository
that broke the code to write out commit-graph.
* tb/reset-shallow:
shallow.c: use '{commit,rollback}_shallow_file'
t5537: use test_write_lines and indented heredocs for readability
|
|
In bd0b42aed3 (fetch-pack: do not take shallow lock unnecessarily,
2019-01-10), the author noted that 'is_repository_shallow' produces
visible side-effect(s) by setting 'is_shallow' and 'shallow_stat'.
This is a problem for e.g., fetching with '--update-shallow' in a
shallow repository with 'fetch.writeCommitGraph' enabled, since the
update to '.git/shallow' will cause Git to think that the repository
isn't shallow when it is, thereby circumventing the commit-graph
compatibility check.
This causes problems in shallow repositories with at least shallow refs
that have at least one ancestor (since the client won't have those
objects, and therefore can't take the reachability closure over commits
when writing a commit-graph).
Address this by introducing thin wrappers over 'commit_lock_file' and
'rollback_lock_file' for use specifically when the lock is held over
'.git/shallow'. These wrappers (appropriately called
'commit_shallow_file' and 'rollback_shallow_file') call into their
respective functions in 'lockfile.h', but additionally reset validity
checks used by the shallow machinery.
Replace each instance of 'commit_lock_file' and 'rollback_lock_file'
with 'commit_shallow_file' and 'rollback_shallow_file' when the lock
being held is over the '.git/shallow' file.
As a result, 'prune_shallow' can now only be called once (since
'check_shallow_file_for_update' will die after calling
'reset_repository_shallow'). But, this is OK since we only call
'prune_shallow' at most once per process.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A number of spots in t5537 use the non-indented heredoc '<<EOF' when
they would benefit from instead using '<<-EOF' or simply
test_write_lines.
In preparation for adding new tests in a good style and being consistent
with the surrounding code, update the existing tests to improve their
readability.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
Also fix the space after redirection operator in t3701 while we're here.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t' t/`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently switched to using Perl instead of `sed` in the httpd-based
tests. Let's reflect that in the label we give the corresponding commit
hashes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to the CI settings.
* js/ci-windows-update:
Azure Pipeline: switch to the latest agent pools
ci: prevent `perforce` from being quarantined
t/lib-httpd: avoid using macOS' sed
|
|
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test modifies a pkt-line stream with sed to change a line with
"shallow" to "unshallow". However, this modification is dependent on
the size of the hash in use; with SHA-256, the pkt-line length is
different, leading to the sed command having no effect.
Use test_oid_cache to specify the correct values for each hash so that
the test continues to work.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of test scripts that are not completely
httpd-specific, but do run a few httpd-specific tests at the end.
These test scripts source 'lib-httpd.sh' somewhere mid-script, which
then skips all the rest of the test script if the dependencies for
running httpd tests are not fulfilled.
As the previous two patches in this series show, already on two
occasions non-httpd-specific tests were appended at the end of such
test scripts, and, consequently, they were skipped as well when httpd
tests couldn't be run.
Add a comment at the end of these test scripts to warn against adding
non-httpd-specific tests at the end, in the hope that they will help
prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git repack` can drop unreachable commits without further warning,
making the corresponding entries in `.git/shallow` invalid, which causes
serious problems when deepening the branches.
One scenario where unreachable commits are dropped by `git repack` is
when a `git fetch --prune` (or even a `git fetch` when a ref was
force-pushed in the meantime) can make a commit unreachable that was
reachable before.
Therefore it is not safe to assume that a `git repack -adlf` will keep
unreachable commits alone (under the assumption that they had not been
packed in the first place, which is an assumption at least some of Git's
code seems to make).
This is particularly important to keep in mind when looking at the
`.git/shallow` file: if any commits listed in that file become
unreachable, it is not a problem, but if they go missing, it *is* a
problem. One symptom of this problem is that a deepening fetch may now
fail with
fatal: error in object: unshallow <commit-hash>
To avoid this problem, let's prune the shallow list in `git repack` when
the `-d` option is passed, unless `-A` is passed, too (which would force
the now-unreachable objects to be turned into loose objects instead of
being deleted). Additionally, we also need to take `--keep-reachable`
and `--unpack-unreachable=<date>` into account.
Note: an alternative solution discussed during the review of this patch
was to teach `git fetch` to simply ignore entries in .git/shallow if the
corresponding commits do not exist locally. A quick test, however,
revealed that the .git/shallow file is written during a shallow *clone*,
in which case the commits do not exist, either, but the "shallow" line
*does* need to be sent. Therefore, this approach would be a lot more
finicky than the approach presented by the this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A `git fetch --prune` can turn previously-reachable objects unreachable,
even commits that are in the `shallow` list. A subsequent `git repack
-ad` will then unceremoniously drop those unreachable commits, and the
`shallow` list will become stale. This means that when we try to fetch
with a larger `--depth` the next time, we may end up with:
fatal: error in object: unshallow <commit-hash>
Reported by Alejandro Pauly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
|
|
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were originally removed by 0232852 (t5537: move
http tests out to t5539, 2014-02-13). However, they were
accidentally re-added in 1ddb4d7 (Merge branch
'nd/upload-pack-shallow', 2014-03-21).
This looks like an error in manual conflict resolution.
Here's what happened:
1. v1.9.0 shipped with the http tests in t5537.
2. We realized that this caused problems, and built
0232852 on top to move the tests to their own file.
This fix made it into v1.9.1.
3. We later had another fix in nd/upload-pack-shallow that
also touched t5537. It was built directly on v1.9.0.
When we merged nd/upload-pack-shallow to master, we got a
conflict; it was built on a version with the http tests, but
we had since removed them. The correct resolution was to
drop the http tests and keep the new ones, but instead we
kept everything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 48d25ca adds a new commit "7" to the repo that the next test case
in commit 1609488 clones from. But the next test case does not expect
this commit. For these tests, it's the bottom that's important, not
the top. Fix the expected commit list.
While at it, fix the default http port number to 5537. Otherwise when
t5536 learns to test httpd, running test in parallel may fail.
References:
48d25ca fetch: add --update-shallow to accept... - 2013-12-05
1609488 smart-http: support shallow fetch/clone - 2013-12-05
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The same steps are done as in when --update-shallow is not given. The
only difference is we now add all shallow commits in "ours" and
"theirs" to .git/shallow (aka "step 8").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "fetch --depth=N" where N exceeds the longest chain of history in
the source repo, usually we just send an "unshallow" line to the
client so full history is obtained.
When the source repo is shallow we need to make sure to "unshallow"
the current shallow point _and_ "shallow" again when the commit
reaches its shallow bottom in the source repo.
This should fix both cases: large <N> and --unshallow.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch just put together pieces from the 8 steps patch. We stop at
step 7 and reject refs that require new shallow commits.
Note that, by rejecting refs that require new shallow commits, we
leave dangling objects in the repo, which become "object islands" by
the next "git fetch" of the same source.
If the first fetch our "ours" set is zero and we do practically
nothing at step 7, "ours" is full at the next fetch and we may need to
walk through commits for reachability test. Room for improvement.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Tan
Johannes Schindelin
Junio C Hamano
Taylor Blau
Andrei Rybak
brian m. carlson
SZEDER Gábor
Elia Pinto
Jeff King
Nguyễn Thái Ngọc Duy