summaryrefslogtreecommitdiff
path: root/t/t5526-fetch-submodules.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01fetching submodules: respect `submodule.fetchJobs` config optionLibravatar Stefan Beller1-0/+14
This allows to configure fetching and updating in parallel without having the command line option. This moved the responsibility to determine how many parallel processes to start from builtin/fetch to submodule.c as we need a way to communicate "The user did not specify the number of parallel processes in the command line options" in the builtin fetch. The submodule code takes care of the precedence (CLI > config > default). Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-16submodules: allow parallel fetching, add tests and documentationLibravatar Stefan Beller1-0/+20
This enables the work of the previous patches. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-16submodule.c: write "Fetching submodule <foo>" to stderrLibravatar Jonathan Nieder1-25/+26
The "Pushing submodule <foo>" progress output correctly goes to stderr, but "Fetching submodule <foo>" is going to stdout by mistake. Fix it to write to stderr. Noticed while trying to implement a parallel submodule fetch. When this particular output line went to a different file descriptor, it was buffered separately, resulting in wrongly interleaved output if we copied it to the terminal naively. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-5/+5
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-20fetch: Also fetch submodules in subdirectories in on-demand modeLibravatar Jens Lehmann1-8/+8
When on-demand mode was active examining the new commits just fetched in the superproject (to check if they record commits for submodules which are not downloaded yet) wasn't done recursively. Because of that fetch did not recursively fetch submodules living in subdirectories even when it should have. Fix that by adding the RECURSIVE flag to the diff_options used to check the new commits and avoid future regressions in this area by moving a submodule in t5526 into a subdirectory. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-12i18n: do not overuse C_LOCALE_OUTPUTLibravatar Junio C Hamano1-57/+36
It is too coarse-grained way that led to artificial splitting of a logically single test case into "do" and "check only without poison". As the majority of check is done by comparing expected and actual output stored in a file with test_cmp anyway, just introduce test_i18ncmp that pretends the actual output matched the expected one when gettext-poison is in effect. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-04Merge branch 'jl/submodule-fetch-on-demand'Libravatar Junio C Hamano1-0/+255
* jl/submodule-fetch-on-demand: fetch/pull: Describe --recurse-submodule restrictions in the BUGS section submodule update: Don't fetch when the submodule commit is already present fetch/pull: Don't recurse into a submodule when commits are already present Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option config: teach the fetch.recurseSubmodules option the 'on-demand' value fetch/pull: Add the 'on-demand' value to the --recurse-submodules option fetch/pull: recurse into submodules when necessary Conflicts: builtin/fetch.c submodule.c
2011-03-09i18n: git-fetch formatting messagesLibravatar Ævar Arnfjörð Bjarmason1-8/+32
Translate some of the formatting messages that appear on git-fetch showing how branches/tags etc. were updated. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: Don't recurse into a submodule when commits are already presentLibravatar Jens Lehmann1-0/+19
When looking for submodules where new commits have been recorded in the superproject ignore those cases where the submodules commits are already present locally. This can happen e.g. when the submodule has been rewound to an earlier state. Then there is no need to fetch the submodule again as the commit recorded in the newly fetched superproject commit has already been fetched earlier into the submodule. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' optionLibravatar Jens Lehmann1-0/+28
Now the behavior of fetch and pull can be configured to the recently added 'on-demand' mode separately for each submodule too. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09config: teach the fetch.recurseSubmodules option the 'on-demand' valueLibravatar Jens Lehmann1-0/+28
To enable the user to change the default behavior of "git fetch" and "git pull" regarding submodule recursion add the new "on-demand" value which has just been added to the "--recurse-submodules" command line option. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: Add the 'on-demand' value to the --recurse-submodules optionLibravatar Jens Lehmann1-0/+71
Until now the --recurse-submodules option could only be used to either fetch all populated submodules recursively or to disable recursion completely. As fetch and pull now by default just fetch those submodules for which new commits have been fetched in the superproject, a command line option to enforce that behavior is needed to be able to override configuration settings. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: recurse into submodules when necessaryLibravatar Jens Lehmann1-0/+109
To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-31t5526: Fix wrong argument order in "git config"Libravatar Jens Lehmann1-1/+1
This fixes a typo where the "git config" arguments "-f" and "--unset" were swapped leading to the creation of a "--unset" file. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12Submodules: Add the "fetchRecurseSubmodules" config optionLibravatar Jens Lehmann1-0/+50
The new boolean "fetchRecurseSubmodules" config option controls the behavior for "git fetch" and "git pull". It specifies if these commands should recurse into submodules and fetch new commits there too and can be set separately for each submodule. In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries are read before looking for them in .git/config. Thus settings found in .git/config will override those from .gitmodules, thereby allowing the user to ignore settings given by the remote side while also letting upstream set reasonable defaults for those users who don't have special needs. This configuration can be overridden by the command line option "--[no-]recurse-submodules" of "git fetch" and "git pull". Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12Add the 'fetch.recurseSubmodules' config settingLibravatar Jens Lehmann1-0/+36
This new boolean option can be used to override the default for "git fetch" and "git pull", which is to not recurse into populated submodules and fetch all new commits there too. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12fetch/pull: Add the --recurse-submodules optionLibravatar Jens Lehmann1-0/+109
Until now you had to call "git submodule update" (without -N|--no-fetch option) or something like "git submodule foreach git fetch" to fetch new commits in populated submodules from their remote. This could lead to "(commits not present)" messages in the output of "git diff --submodule" (which is used by "git gui" and "gitk") after fetching or pulling new commits in the superproject and is an obstacle for implementing recursive checkout of submodules. Also "git submodule update" cannot fetch changes when disconnected, so it was very easy to forget to fetch the submodule changes before disconnecting only to discover later that they are needed. This patch adds the "--recurse-submodules" option to recursively fetch each populated submodule from the url configured in the .git/config of the submodule at the end of each "git fetch" or during "git pull" in the superproject. The submodule paths are taken from the index. The hidden option "--submodule-prefix" is added to "git fetch" to be able to print out the full paths of nested submodules. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>