summaryrefslogtreecommitdiff
path: root/t/t5516-fetch-push.sh
AgeCommit message (Collapse)AuthorFilesLines
2010-03-11t5516: Use test_cmp when appropriateLibravatar Junio C Hamano1-3/+3
Consistently using test_cmp would make debugging test scripts far easier, as output from them run under "-v" option becomes readable. Besides, some platforms' "diff" implementations lack "-q" option. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28git-push: add tests for git push --porcelainLibravatar Larry D'Anna1-0/+50
Verify that the output format is correct for successful, rejected, and flagrantly erroneous pushes. Signed-off-by: Larry D'Anna <larry@elder-gods.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Merge branch 'jk/push-to-delete'Libravatar Junio C Hamano1-0/+26
* jk/push-to-delete: builtin-push: add --delete as syntactic sugar for :foo
2009-12-30builtin-push: add --delete as syntactic sugar for :fooLibravatar Jan Krüger1-0/+26
Refspecs without a source side have been reported as confusing by many. As an alternative, this adds support for commands like: git push origin --delete somebranch git push origin --delete tag sometag Specifically, --delete will prepend a colon to all colon-less refspecs given on the command line, and will refuse to accept refspecs with colons to prevent undue confusion. Signed-off-by: Jan Krüger <jk@jk.gs> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-26Merge branch 'jc/1.7.0-push-safety'Libravatar Junio C Hamano1-0/+1
* jc/1.7.0-push-safety: Refuse deleting the current branch via push Refuse updating the current branch in a non-bare repository via push
2009-09-08Add url.<base>.pushInsteadOf: URL rewriting for push onlyLibravatar Josh Triplett1-0/+47
This configuration option allows systematically rewriting fetch-only URLs to push-capable URLs when used with push. For instance: [url "ssh://example.org/"] pushInsteadOf = "git://example.org/" This will allow clones of "git://example.org/path/to/repo" to subsequently push to "ssh://example.org/path/to/repo", without manually configuring pushurl for that remote. Includes documentation for the new option, bash completion updates, and test cases (both that pushInsteadOf applies to push, that it does not apply to fetch, and that it is ignored when pushURL is already defined). Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29Refuse updating the current branch in a non-bare repository via pushLibravatar Junio C Hamano1-0/+1
This makes git-push refuse pushing into a non-bare repository to update the current branch by default. To help people who are used to be able to do this (and later "reset --hard" it in some other way), an error message is issued when this refusal is triggered, instructing how to resurrect the old behaviour. Hosting sites that do not give the users direct access to customize their repositories (e.g. repo.or.cz, gitorious, github etc.) may further want to explicitly set the configuration variable to "refuse" for their customers' repositories. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-09t5516: Check pushurl config settingLibravatar Michael J Gruber1-0/+13
Check whether the new remote.${remotename}.pushurl setting is obeyed and whether it overrides remote.${remotename}.url. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-03receive-pack: explain what to do when push updates the current branchLibravatar Junio C Hamano1-3/+3
This makes "git push" issue a more detailed instruction when a user pushes into the current branch of a non-bare repository without having an explicit configuration set to receive.denycurrentbranch. In such a case, it will also tell the user that the default will change to refusal in a future version of git. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-12Merge branch 'mk/maint-cg-push'Libravatar Junio C Hamano1-0/+50
* mk/maint-cg-push: git push: Interpret $GIT_DIR/branches in a Cogito compatible way Conflicts: t/t5516-fetch-push.sh
2008-11-11git push: Interpret $GIT_DIR/branches in a Cogito compatible wayLibravatar Martin Koegler1-0/+50
Current git versions ignore everything after # (called <head> in the following) when pushing. Older versions (before cf818348f1ab57), interpret #<head> as part of the URL, which make git bail out. As branches origin from Cogito, it is the best to correct this by using the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>. Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-09receive-pack: detect push to current branch of non-bare repoLibravatar Jeff King1-0/+37
Pushing into the currently checked out branch of a non-bare repository can be dangerous; the HEAD then loses sync with the index and working tree, and it looks in the receiving repo as if the pushed changes have been reverted in the index (since they were never there in the first place). This patch adds a safety valve that checks for this condition and either generates a warning or denies the update. We trigger the check only on a non-bare repository, since a bare repo does not have a working tree (and in fact, pushing to the HEAD branch is a common workflow for publishing repositories). The behavior is configurable via receive.denyCurrentBranch, defaulting to "warn" so as not to break existing setups (though it may, after a deprecation period, switch to "refuse" by default). For users who know what they are doing and want to silence the warning (e.g., because they have a post-receive hook that reconciles the HEAD and working tree), they can turn off the warning by setting it to false or "ignore". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-09t5516: refactor oddball testsLibravatar Jeff King1-29/+21
t5516 sets up some utility functions for starting each test with a clean slate. However, there were a few tests added that do not use these functions, but instead make their own repositories. Let's bring these in line with the rest of the tests. Not only do we reduce the number of lines, but these tests will benefit from any further enhancements to the utility scripts. The conversion is pretty straightforward. Most of the tests created a parent/child clone relationship, for which we now use 'testrepo' as the parent. One test looked in testrepo, but relied on previous tests to have set it up; it now sets up testrepo explicitly, which makes it a bit more robust to changes in the script, as well. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-05push: fix local refs update if already up-to-dateLibravatar Clemens Buchacher1-0/+31
git push normally updates local refs only after a successful push. If the remote already has the updates -- pushed indirectly through another repository, for example -- we forget to update local tracking refs. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-4/+4
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-03Fix t5516 on cygwin: it does not like double slashes at the beginning of a pathLibravatar Alex Riesen1-1/+1
The double slashes "//" result from url./$TRASH/. expansion and the current directory, which even in cygwin contains "/" as first character. In cygwin such strings have special meaning: UNC path. Accessing an UNC path built for test purpose usually fails. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-23Merge branch 'pb/push'Libravatar Junio C Hamano1-0/+41
* pb/push: add special "matching refs" refspec
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-3/+3
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-04add special "matching refs" refspecLibravatar Paolo Bonzini1-0/+41
This patch provides a way to specify "push matching heads" using a special refspec ":". This is useful because it allows "push = +:" as a way to specify that matching refs will be pushed but, in addition, forced updates will be allowed, which was not possible before. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-24push: allow unqualified dest refspecs to DWIMLibravatar Jeff King1-0/+40
Previously, a push like: git push remote src:dst would go through the following steps: 1. check for an unambiguous 'dst' on the remote; if it exists, then push to that ref 2. otherwise, check if 'dst' begins with 'refs/'; if it does, create a new ref 3. otherwise, complain because we don't know where in the refs hierarchy to put 'dst' However, in some cases, we can guess about the ref type of 'dst' based on the ref type of 'src'. Specifically, before complaining we now check: 2.5. if 'src' resolves to a ref starting with refs/heads or refs/tags, then prepend that to 'dst' So now this creates a new branch on the remote, whereas it previously failed with an error message: git push master:newbranch Note that, by design, we limit this DWIM behavior only to source refs which resolve exactly (including symrefs which resolve to existing refs). We still complain on a partial destination refspec if the source is a raw sha1, or a ref expression such as 'master~10'. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-24Merge branch 'maint-1.5.4' into maintLibravatar Junio C Hamano1-13/+1
* maint-1.5.4: t5516: remove ambiguity test (1) Linked glossary from cvs-migration page write-tree: properly detect failure to write tree objects
2008-04-23t5516: remove ambiguity test (1)Libravatar Jeff King1-13/+1
This test tried to push into a remote with ambiguous refs in remotes/$x/master and remotes/$y/master. However, the remote never actually tells us about the refs/remotes hierarchy, so we don't even see this ambiguity. The test happened to pass because we were simply looking for failure, and the test fails for another reason: the dst refspec does not exist and does not begin with refs/, making it invalid. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-12Fix config key miscount in url.*.insteadOfLibravatar Daniel Barkalow1-4/+4
Also tighten test to require it to be correct. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-27Merge branch 'db/push-single-with-HEAD'Libravatar Junio C Hamano1-0/+43
* db/push-single-with-HEAD: Resolve value supplied for no-colon push refspecs
2008-02-24Add support for url aliases in config filesLibravatar Daniel Barkalow1-0/+31
This allows users with different preferences for access methods to the same remote repositories to rewrite each other's URLs by pattern matching across a large set of similiarly set up repositories to each get the desired access. For example, if you don't have a kernel.org account, you might want settings like: [url "git://git.kernel.org/pub/"] insteadOf = master.kernel.org:/pub Then, if you give git a URL like: master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git it will act like you gave it: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git and you can cut-and-paste pull requests in email without fixing them by hand, for example. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-20Resolve value supplied for no-colon push refspecsLibravatar Daniel Barkalow1-0/+43
When pushing a refspec like "HEAD", we used to treat it as "HEAD:HEAD", which didn't work without rewriting. Instead, we should resolve the ref. If it's a symref, further require it to point to a branch, to avoid doing anything especially unexpected. Also remove the rewriting previously added in builtin-push. Since the code for "HEAD" uses the regular refspec parsing, it automatically handles "+HEAD" without anything special. [jc: added a further test to make sure that "remote.*.push = HEAD" works] Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-04Merge branch 'sp/refspec-match'Libravatar Junio C Hamano1-1/+28
* sp/refspec-match: refactor fetch's ref matching to use refname_match() push: use same rules as git-rev-parse to resolve refspecs add refname_match() push: support pushing HEAD to real branch name
2007-11-30receive-pack: allow deletion of corrupt refsLibravatar Johannes Schindelin1-3/+42
Occasionally, in some setups (*cough* forks on repo.or.cz *cough*) some refs go stale, e.g. when the forkee rebased and lost some objects needed by the fork. The quick & dirty way to deal with those refs is to delete them and push them again. However, git-push first would first fetch the current commit name for the ref, would receive a null sha1 since the ref does not point to a valid object, then tell receive-pack that it should delete the ref with this commit name. delete_ref() would be subsequently be called, and check that resolve_ref() (which does _not_ check for validity of the object) returns the same commit name. Which would fail. The proper fix is to avoid corrupting repositories, but in the meantime this is a good fix in any case. Incidentally, some instances of "cd .." in the test cases were fixed, so that subsequent test cases run in t/trash/ irrespective of the outcome of the previous test cases. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-28Revert "t5516: test update of local refs on push"Libravatar Jeff King1-28/+0
This reverts commit 09fba7a59d38d1cafaf33eadaf1d409c4113b30c. These tests are superseded by the ones in t5404 (added in 6fa92bf3 and 8736a848), which are more extensive and better organized. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-18push: use same rules as git-rev-parse to resolve refspecsLibravatar Steffen Prohaska1-1/+11
This commit changes the rules for resolving refspecs to match the rules for resolving refs in rev-parse. git-rev-parse uses clear rules to resolve a short ref to its full name, which are well documented. The rules for resolving refspecs documented in git-send-pack were less strict and harder to understand. This commit replaces them by the rules of git-rev-parse. The unified rules are easier to understand and better resolve ambiguous cases. You can now push from a repository containing several branches ending on the same short name. Note, this may break existing setups. For example, "master" will no longer resolve to "origin/master" even when there is no other "master" elsewhere. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-18push: support pushing HEAD to real branch nameLibravatar Steffen Prohaska1-0/+17
This teaches "push <remote> HEAD" to resolve HEAD on the local side to its real branch name, e.g. master, and then act as if the real branch name was specified. So we have a shorthand for pushing the current branch. Besides HEAD, no other symbolic ref is resolved. Thanks to Daniel Barkalow <barkalow@iabervon.org> for suggesting this implementation, which is much simpler than the implementation proposed before. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-18t5516: test update of local refs on pushLibravatar Jeff King1-0/+28
The first test (updating local refs) should succeed without the prior commit, but the second one (not updating on error) used to fail before the prior commit was written. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-15Add a --dry-run option to git-push.Libravatar Brian Ewins1-0/+10
The default behaviour of git-push is potentially confusing for new users, since it will push changes that are not on the current branch. Publishing patches that were still cooking on a development branch is hard to undo. It would also be nice to be able to verify the expansion of refspecs if you've edited them, so that you know what branches matched on the server. Adding a --dry-run flag allows the user to experiment safely and learn how to use git-push properly. Originally suggested by Steffen Prohaska. Signed-off-by: Brian Ewins <brian.ewins@gmail.com> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-07-04Fix t5516 to create test repo without hooksLibravatar Alex Riesen1-1/+2
Otherwise the hooks will be executed on cygwin and the test will fail because of the contributed hooks. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01Fix t5516-fetch for systems where `wc -l` outputs whitespace.Libravatar Brian Gernhardt1-2/+2
When wc outputs whitespace, the test "$(command | wc -l)" = 1 is broken because " 1" != "1". Let the shell eat the whitespace by using test 1 = $(command | wc -l) instead. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-09remote.c: "git-push frotz" should update what matches at the source.Libravatar Junio C Hamano1-0/+52
Earlier, when the local repository has a branch "frotz" and the remote repository has a tag "frotz" (but not branch "frotz"), "git-push frotz" mistakenly updated the tag at the remote side. This was because the partial refname matching code was applied independently on both source and destination side. With this fix, when a colon-less refspec is given to git-push, we first match it with the refs in the source repository, and update the matching ref in the destination repository. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-09remote.c: fix "git push" weak match disambiguationLibravatar Junio C Hamano1-0/+112
When "git push A:B" is given, and A (or B) is not a full refname that begins with refs/, we require an unambiguous match with an existing ref. For this purpose, a match with a local branch or a tag (i.e. refs/heads/A and refs/tags/A) is called a "strong match", and any other match is called a "weak match". A partial refname is unambiguous when there is only one strong match with any number of weak matches, or when there is only one weak match and no other match. However, as reported by Sparse with Ramsay Jones recently, count_refspec_match() function had a bug where a variable in an inner block masked a different variable of the same name, which caused the weak matches to be ignored. This fixes it, and adds tests for the fix. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08Test wildcard push/fetchLibravatar Junio C Hamano1-0/+82
Signed-off-by: Junio C Hamano <gitster@pobox.com>