| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
|
|
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
|
|
When pushing a hidden ref, e.g.:
$ git push origin HEAD:refs/hidden/foo
"receive-pack" will reject our request with an error message like this:
! [remote rejected] HEAD -> refs/hidden/foo (deny updating a hidden ref)
The remote side ("git-receive-pack") will not create the hidden ref as
expected, but the pack file sent by "git-send-pack" is left inside the
remote repository. I.e. the quarantine directory is not purged as it
should be.
Add a checkpoint before calling "tmp_objdir_migrate()" and after calling
the "pre-receive" hook to purge that temporary data in the quarantine
area when there is no command ready to run.
The reason we do not add the checkpoint before the "pre-receive" hook,
but after it, is that the "pre-receive" hook is called with a switch-off
"skip_broken" flag, and all commands, even broken ones, should be fed
by calling "feed_receive_hook()".
Add a new test case in t5516 as well.
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Helped-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Chen Bojun <bojun.cbj@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
"git fetch" without the "--update-head-ok" option ought to protect
a checked out branch from getting updated, to prevent the working
tree that checks it out to go out of sync. The code was written
before the use of "git worktree" got widespread, and only checked
the branch that was checked out in the current worktree, which has
been updated.
(originally called ak/fetch-not-overwrite-any-current-branch)
* ak/protect-any-current-branch:
branch: protect branches checked out in all worktrees
receive-pack: protect current branch for bare repository worktree
receive-pack: clean dead code from update_worktree()
fetch: protect branches checked out in all worktrees
worktree: simplify find_shared_symref() memory ownership model
branch: lowercase error messages
receive-pack: lowercase error messages
fetch: lowercase error messages
|
|
To create its "expect" file, this test pipes into `sort` the output of
`git for-each-ref` and a copy of that same output but with a minor
textual transformation applied. To do so, it employs a subshell and
commands `cat` and `sed` even though the same result can be accomplished
by `sed` alone (without a subshell).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bare repository won’t have a working tree at "..", but it may still
have separate working trees created with git worktree. We should protect
the current branch of such working trees from being updated or deleted,
according to receive.denyCurrentBranch.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refuse to fetch into the currently checked out branch of any working
tree, not just the current one.
Fixes this previously reported bug:
https://lore.kernel.org/git/cb957174-5e9a-5603-ea9e-ac9b58a2eaad@mathema.de/
As a side effect of using find_shared_symref, we’ll also refuse the
fetch when we’re on a detached HEAD because we’re rebasing or bisecting
on the branch in question. This seems like a sensible change.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push remote-name" (that is, with no refspec given on the command
line) should push the refspecs in remote.remote-name.push. There is no
test case that checks this behavior in detached HEAD, so add one.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original point of the GIT_REF_PARANOIA flag was to include broken
refs in iterations, so that possibly-destructive operations would not
silently ignore them (and would generally instead try to operate on the
oids and fail when the objects could not be accessed).
We already turned this on by default for some dangerous operations, like
"repack -ad" (where missing a reachability tip would mean dropping the
associated history). But it was not on for general use, even though it
could easily result in the spreading of corruption (e.g., imagine
cloning a repository which simply omits some of its refs because
their objects are missing; the result quietly succeeds even though you
did not clone everything!).
This patch turns on GIT_REF_PARANOIA by default. So a clone as mentioned
above would actually fail (upload-pack tells us about the broken ref,
and when we ask for the objects, pack-objects fails to deliver them).
This may be inconvenient when working with a corrupted repository, but:
- we are better off to err on the side of complaining about
corruption, and then provide mechanisms for explicitly loosening
safety.
- this is only one type of corruption anyway. If we are missing any
other objects in the history that _aren't_ ref tips, then we'd
behave similarly (happily show the ref, but then barf when we
started traversing).
We retain the GIT_REF_PARANOIA variable, but simply default it to "1"
instead of "0". That gives the user an escape hatch for loosening this
when working with a corrupt repository. It won't work across a remote
connection to upload-pack (because we can't necessarily set environment
variables on the remote), but there the client has other options (e.g.,
choosing which refs to fetch).
As a bonus, this also makes ref iteration faster in general (because we
don't have to call has_object_file() for each ref), though probably not
noticeably so in the general case. In a repo with a million refs, it
shaved a few hundred milliseconds off of upload-pack's advertisement;
that's noticeable, but most repos are not nearly that large.
The possible downside here is that any operation which iterates refs but
doesn't ever open their objects may now quietly claim to have X when the
object is corrupted (e.g., "git rev-list new-branch --not --all" will
treat a broken ref as uninteresting). But again, that's not really any
different than corruption below the ref level. We might have
refs/heads/old-branch as non-corrupt, but we are not actively checking
that we have the entire reachable history. Or the pointed-to object
could even be corrupted on-disk (but our "do we have it" check would
still succeed). In that sense, this is merely bringing ref-corruption in
line with general object corruption.
One alternative implementation would be to actually check for broken
refs, and then _immediately die_ if we see any. That would cause the
"rev-list --not --all" case above to abort immediately. But in many ways
that's the worst of all worlds:
- it still spends time looking up the objects an extra time
- it still doesn't catch corruption below the ref level
- it's even more inconvenient; with the current implementation of
GIT_REF_PARANOIA for something like upload-pack, we can make
the advertisement and let the client choose a non-broken piece of
history. If we bail as soon as we see a broken ref, they cannot even
see the advertisement.
The test changes here show some of the fallout. A non-destructive "git
repack -adk" now fails by default (but we can override it). Deleting a
broken ref now actually tells the hooks the correct "before" state,
rather than a confusing null oid.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few tests in t5516 want to assert that we can delete a corrupted ref
whose pointed-to object is missing. They do so by using the "main"
branch, which is also pointed to by HEAD.
This does work, but only because of a subtle assumption about the
implementation. We do not block the deletion because of the invalid ref,
but we _also_ do not notice that the deleted branch is pointed to by
HEAD. And so the safety rule of "do not allow HEAD to be deleted in a
non-bare repository" does not kick in, and the test passes.
Let's instead use a non-HEAD branch. That still tests what we care about
here (deleting a corrupt ref), but without implicitly depending on our
failure to notice that we're deleting HEAD. That will future proof the
test against that behavior changing.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 477673d6f3 ("send-pack: support push negotiation", 2021-05-05)
did not test the case in which a remote advertises at least one ref. In
such a case, "remote_refs" in get_commons_through_negotiation() in
send-pack.c would also contain those refs with a zero ref->new_oid (in
addition to the refs being pushed with a nonzero ref->new_oid). Passing
them as negotiation tips to "git fetch" causes an error, so filter them
out.
(The exact error that would happen in "git fetch" in this case is a
segmentation fault, which is unwanted. This will be fixed in the
subsequent commit.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach Git the push.negotiate config variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push $there --delete ''" should have been diagnosed as an
error, but instead turned into a matching push, which has been
corrected.
* jc/push-delete-nothing:
push: do not turn --delete '' into a matching push
|
|
When we added a syntax sugar "git push remote --delete <ref>" to
"git push" as a synonym to the canonical "git push remote :<ref>"
syntax at f517f1f2 (builtin-push: add --delete as syntactic sugar
for :foo, 2009-12-30), we weren't careful enough to make sure that
<ref> is not empty.
Blindly rewriting "--delete <ref>" to ":<ref>" means that an empty
string <ref> results in refspec ":", which is the syntax to ask for
"matching" push that does not delete anything.
Worse yet, if there were matching refs that can be fast-forwarded,
they would have been published prematurely, even if the user feels
that they are not ready yet to be pushed out, which would be a real
disaster.
Noticed-by: Tilman Vogel <tilman.vogel@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
Commit 014ade7484 (upload-pack: send ERR packet for non-tip objects,
2019-04-13) added a test that greps the output of a failed fetch to make
sure that upload-pack sent us the ERR packet we expected. But checking
this is racy; despite the argument in that commit, the client may still
be sending a "done" line after the server exits, causing it to die() on
a failed write() and never see the ERR packet at all.
This fails quite rarely on Linux, but more often on macOS. However, it
can be triggered reliably with:
diff --git a/fetch-pack.c b/fetch-pack.c
index 876f90c759..cf40de9092 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -489,6 +489,7 @@ static int find_common(struct fetch_negotiator *negotiator,
done:
trace2_region_leave("fetch-pack", "negotiation_v0_v1", the_repository);
if (!got_ready || !no_done) {
+ sleep(1);
packet_buf_write(&req_buf, "done\n");
send_request(args, fd[1], &req_buf);
}
This is a real user-visible race that it would be nice to fix, but it's
tricky to do so: the client would have to speculatively try to read an
ERR packet after hitting a write() error. And at least for this error,
it's specific to v0 (since v2 does not enforce reachability at all).
So let's loosen the test to avoid annoying racy failures. If we
eventually do the read-after-failed-write thing, we can tighten it. And
if not, v0 will grow increasingly obsolete as servers support v2, so the
utility of this test will decrease over time anyway.
Note that we can still check stderr to make sure upload-pack bailed for
the reason we expected. It writes a similar message to stderr, and
because the server side is just another process connected by pipes,
we'll reliably see it. This would not be the case for git://, or for
ssh servers that do not relay stderr (e.g., GitHub's custom endpoint
does not).
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit 9ba89f484e git learned how to push to a remote branch using
the source @, for example:
git push origin @:master
However, if the right-hand side is missing, the push fails:
git push origin @
It is obvious what is the desired behavior, and allowing the push makes
things more consistent.
Additionally, @:master now has the same semantics as HEAD:master.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No need to do two checkouts.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So that we are not left in an inconsistent state between them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t551*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
When pushing a new reference (not a head or tag), report it as a new
reference instead of a new branch.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
|
|
As our test suite partially reflects how we work in the Git project, it
is natural that the branch name `pu` was used in a couple places.
Since that branch was renamed to `seen`, let's use the new name
consistently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The porcelain output of a failed `git-push` command is inconsistent for
different protocols. For example, the following `git-push` command
may fail due to the failure of the `pre-receive` hook.
git push --porcelain origin HEAD:refs/heads/master
For SSH protocol, the porcelain output does not end with a "Done"
message:
To <URL/of/upstream.git>
! HEAD:refs/heads/master [remote rejected] (pre-receive hook declined)
While for HTTP protocol, the porcelain output does end with a "Done"
message:
To <URL/of/upstream.git>
! HEAD:refs/heads/master [remote rejected] (pre-receive hook declined)
Done
The following code at the end of function `send_pack()` indicates that
`send_pack()` should not return an error if some references are rejected
in porcelain mode.
int send_pack(...)
... ...
if (args->porcelain)
return 0;
for (ref = remote_refs; ref; ref = ref->next) {
switch (ref->status) {
case REF_STATUS_NONE:
case REF_STATUS_UPTODATE:
case REF_STATUS_OK:
break;
default:
return -1;
}
}
return 0;
}
So if atomic push failed, must check the porcelain mode before return
an error. And `receive_status()` should not return an error for a
failed updated reference, because `send_pack()` will check them instead.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" should stop from updating a branch that is checked out
when receive.denyCurrentBranch configuration is set, but it failed
to pay attention to checkouts in secondary worktrees. This has
been corrected.
* hv/receive-denycurrent-everywhere:
t2402: test worktree path when called in .git directory
receive.denyCurrentBranch: respect all worktrees
t5509: use a bare repository for test push target
get_main_worktree(): allow it to be called in the Git directory
|
|
The receive.denyCurrentBranch config option controls what happens if
you push to a branch that is checked out into a non-bare repository.
By default, it rejects it. It can be disabled via `ignore` or `warn`.
Another yet trickier option is `updateInstead`.
However, this setting was forgotten when the git worktree command was
introduced: only the main worktree's current branch is respected.
With this change, all worktrees are respected.
That change also leads to revealing another bug,
i.e. `receive.denyCurrentBranch = true` was ignored when pushing into a
non-bare repository's unborn current branch using ref namespaces. As
`is_ref_checked_out()` returns 0 which means `receive-pack` does not get
into conditional statement to switch `deny_current_branch` accordingly
(ignore, warn, refuse, unconfigured, updateInstead).
receive.denyCurrentBranch uses the function `refs_resolve_ref_unsafe()`
(called via `resolve_refdup()`) to resolve the symbolic ref HEAD, but
that function fails when HEAD does not point at a valid commit.
As we replace the call to `refs_resolve_ref_unsafe()` with
`find_shared_symref()`, which has no problem finding the worktree for a
given branch even if it is unborn yet, this bug is fixed at the same
time: receive.denyCurrentBranch now also handles worktrees with unborn
branches as intended even while using ref namespaces.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 8cbeba0632 (tests: define GIT_TEST_PROTOCOL_VERSION,
2019-02-25), it has been possible to run tests with a newer protocol
version by setting the GIT_TEST_PROTOCOL_VERSION envvar to a version
number. Tests that assume protocol v0 handle this by explicitly
setting
GIT_TEST_PROTOCOL_VERSION=
or similar constructs like 'test -z "$GIT_TEST_PROTOCOL_VERSION" ||
return 0' to declare that they only handle the default (v0) protocol.
The emphasis there is a bit off: it would be clearer to specify
GIT_TEST_PROTOCOL_VERSION=0 to inform the reader that these tests are
specifically testing and relying on details of protocol v0. Do so.
This way, a reader does not need to know what the default protocol
version is, and the tests can continue to work when the default
protocol version used by Git advances past v0.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up and a fix for "git fetch" by an explicit object name
(as opposed to fetching refs by name).
* jk/fetch-reachability-error-fix:
fetch: do not consider peeled tags as advertised tips
remote.c: make singular free_ref() public
fetch: use free_refs()
pkt-line: prepare buffer before handling ERR packets
upload-pack: send ERR packet for non-tip objects
t5530: check protocol response for "not our ref"
t5516: drop ok=sigpipe from unreachable-want tests
|
|
The tests have been updated not to rely on the abbreviated option
names the parse-options API offers, to protect us from an
abbreviated form of an option that used to be unique within the
command getting non-unique when a new option that share the same
prefix is added.
* js/spell-out-options-in-tests:
tests: disallow the use of abbreviated options (by default)
tests (pack-objects): use the full, unabbreviated `--revs` option
tests (status): spell out the `--find-renames` option in full
tests (push): do not abbreviate the `--follow-tags` option
t5531: avoid using an abbreviated option
t7810: do not abbreviate `--no-exclude-standard` nor `--invert-match`
tests (rebase): spell out the `--force-rebase` option
tests (rebase): spell out the `--keep-empty` option
|
|
Our filter_refs() function accidentally considers the target of a peeled
tag to be advertised by the server, even though upload-pack on the
server side does not consider it so. This can result in the client
making a bogus fetch to the server, which will end with the server
complaining "not our ref". Whereas the correct behavior is for the
client to notice that the server will not allow the request and error
out immediately.
So as bugs go, this is not very serious (the outcome is the same either
way -- the fetch fails). But it's worth making the logic here correct
and consistent with other related cases (e.g., fetching an oid that the
server did not mention at all).
The crux of the issue comes from fdb69d33c4 (fetch-pack: always allow
fetching of literal SHA1s, 2017-05-15). After that, the strategy of
filter_refs() is basically:
- for each advertised ref, try to match it with a "sought" ref
provided by the user. Skip any malformed refs (which includes
peeled values like "refs/tags/foo^{}"), and place any unmatched
items onto the unmatched list.
- if there are unmatched sought refs, then put all of the advertised
tips into an oidset, including the unmatched ones.
- for each sought ref, see if it's in the oidset, in which case it's
legal for us to ask the server for it
The problem is in the second step. Our list of unmatched refs includes
the peeled refs, even though upload-pack does not allow them to be
directly fetched. So the simplest fix would be to exclude them during
that step.
However, we can observe that the unmatched list isn't used for anything
else, and is freed at the end. We can just free those malformed refs
immediately. That saves us having to check each ref a second time to see
if it's malformed.
Note that this code only kicks in when "strict" is in effect. I.e., if
we are using the v0 protocol and uploadpack.allowReachableSHA1InWant is
not in effect. With v2, all oids are allowed, and we do not bother
creating or consulting the oidset at all. To future-proof our test
against the upcoming GIT_TEST_PROTOCOL_VERSION flag, we'll manually mark
it as a v0-only test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 2d103c31c2 (pack-protocol.txt: accept error packets in any
context, 2018-12-29), the pktline code will detect an ERR packet and die
automatically, saving the caller from dealing with it. But we do so too
early in the function, before we have terminated the buffer with a NUL.
As a result, passing the ERR message to die() may result in us printing
random cruft from a previous packet. This doesn't trigger memory tools
like ASan because we reuse the same buffer over and over (so the
contents are valid and initialized; they're just stale).
We can see demonstrate this by tightening the regex we use to match the
error message in t5516; without this patch, git-fetch will accidentally
print the capabilities from the (much longer) initial packet we
received.
By moving the ERR code later in the function we get a few other
benefits, too:
- we'll now chomp any newline sent by the other side (which is what we
want, since die() will add its own newline)
- we'll now mention the ERR packet with GIT_TRACE_PACKET
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit bdb31eada7 (upload-pack: report "not our ref" to client,
2017-02-23) catches the case where a client asks for an object we don't
have, and issues a message that the client can show to the user (in
addition to dying and writing to stderr).
There's a similar case (with the same message) when the client asks for
an object which we _do_ have, but which isn't a ref tip (or isn't
reachable, when uploadpack.allowReachableSHA1InWant is true). Let's give
that one the same treatment, for the same reason (namely that it's more
informative to the client than just hanging up, since they won't see our
stderr over some protocols).
There are two tests here. We cover it most directly in t5530 by invoking
upload-pack, which matches the existing "not our ref" test.
But a more end-to-end check is that "git fetch" actually shows the
message to the client. We're already checking in t5516 that this case
fails, so we can just check stderr there, too. Note that even after we
started ignoring SIGPIPE in 8bf4becf0c, this could in theory still be
racy as described in that commit (because we die() on write failures
before pumping the connection for any ERR packets).
In practice this should be OK for this case. The server will not
actually check reachability until it has received our whole group of
"want" lines. And since we have no objects in the repository, we won't
send any "have" lines, meaning we're always waiting to read the server
response.
Note also that this case cannot happen in the v2 protocol, since it
allows any available object to be requested. However, we don't have to
take any steps to protect against the upcoming GIT_TEST_PROTOCOL_VERSION
in our tests:
- the tests in t5516 would already need to be skipped under v2, and
that is covered by ab0c5f5096 (tests: always test fetch of
unreachable with v0, 2019-02-25)
- the tests in t5530 invoke upload-pack directly, which will continue
to default to v0. Eventually we may have a test setting which uses
v2 even for bare upload-pack calls, but we can't override it here
until we know what the setting looks like.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We annotated our test_must_fail calls in 8bf4becf0c (add "ok=sigpipe" to
test_must_fail and use it to fix flaky tests, 2015-11-27) because the
abrupt hangup of the server meant that we'd sometimes fail on read() and
sometimes get SIGPIPE on write().
But since 143588949c (fetch: ignore SIGPIPE during network operation,
2019-03-03), we make sure that we end up with a real die(), and our
tests no longer need to work around the race.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We really want to spell out the option in the full form, to avoid any
ambiguity that might be introduced by future patches.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests check that fetching an unreachable object fails, but protocol
v2 allows such fetches. Unset GIT_TEST_PROTOCOL_VERSION so that these
tests are always run using protocol v0.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the functions in our test library check that they were invoked
properly with conditions like this:
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-expect-success"
If this particular condition is triggered, then 'error' will abort the
whole test script with a bold red error message [1] right away.
However, under certain circumstances the test script will be aborted
completely silently, namely if:
- a similar condition in a test helper function like
'test_line_count' is triggered,
- which is invoked from the test script's "main" shell [2],
- and the test script is run manually (i.e. './t1234-foo.sh' as
opposed to 'make t1234-foo.sh' or 'make test') [3]
- and without the '--verbose' option,
because the error message is printed from within 'test_eval_', where
standard output is redirected either to /dev/null or to a log file.
The only indication that something is wrong is that not all tests in
the script are executed and at the end of the test script's output
there is no "# passed all N tests" message, which are subtle and can
easily go unnoticed, as I had to experience myself.
Send these "bug in the test script" error messages directly to the
test scripts standard error and thus to the terminal, so those bugs
will be much harder to overlook. Instead of updating all ~20 such
'error' calls with a redirection, let's add a BUG() function to
'test-lib.sh', wrapping an 'error' call with the proper redirection
and also including the common prefix of those error messages, and
convert all those call sites [4] to use this new BUG() function
instead.
[1] That particular error message from 'test_expect_success' is
printed in color only when running with or without '--verbose';
with '--tee' or '--verbose-log' the error is printed without
color, but it is printed to the terminal nonetheless.
[2] If such a condition is triggered in a subshell of a test, then
'error' won't be able to abort the whole test script, but only the
subshell, which in turn causes the test to fail in the usual way,
indicating loudly and clearly that something is wrong.
[3] Well, 'error' aborts the test script the same way when run
manually or by 'make' or 'prove', but both 'make' and 'prove' pay
attention to the test script's exit status, and even a silently
aborted test script would then trigger those tools' usual
noticable error messages.
[4] Strictly speaking, not all those 'error' calls need that
redirection to send their output to the terminal, see e.g.
'test_expect_success' in the opening example, but I think it's
better to be consistent.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The receive.denyCurrentBranch=updateInstead codepath kicked in even
when the push should have been rejected due to other reasons, such
as it does not fast-forward or the update-hook rejects it, which
has been corrected.
* jc/receive-deny-current-branch-fix:
receive: denyCurrentBranch=updateinstead should not blindly update
|
|
The handling of receive.denyCurrentBranch=updateInstead was added to
a switch statement that handles other values of the variable, but
all the other case arms only checked a condition to reject the
attempted push, or let later logic in the same function to still
intervene, so that a push that does not fast-forward (which is
checked after the switch statement in question) is still rejected.
But the handling of updateInstead incorrectly took immediate effect,
without giving other checks a chance to intervene.
Instead of calling update_worktree() that causes the side effect
immediately, just note the fact that we will need to call the
function later, and first give other checks a chance to reject the
request. After the update-hook gets a chance to reject the push
(which happens as the last step in a series of checks), call
update_worktree() when we earlier detected the need to.
Reported-by: Rajesh Madamanchi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
* ab/fetch-tags-noclobber:
fetch: stop clobbering existing tags without --force
fetch: document local ref updates with/without --force
push doc: correct lies about how push refspecs work
push doc: move mention of "tag <tag>" later in the prose
push doc: remove confusing mention of remote merger
fetch tests: add a test for clobbering tag behavior
push tests: use spaces in interpolated string
push tests: make use of unused $1 in test description
fetch: change "branch" to "reference" in --force -h output
|
|
Change "fetch" to treat "+" in refspecs (aka --force) to mean we
should clobber a local tag of the same name.
This changes the long-standing behavior of "fetch" added in
853a3697dc ("[PATCH] Multi-head fetch.", 2005-08-20). Before this
change, all tag fetches effectively had --force enabled. See the
git-fetch-script code in fast_forward_local() with the comment:
> Tags need not be pointing at commits so there is no way to
> guarantee "fast-forward" anyway.
That commit and the rest of the history of "fetch" shows that the
"+" (--force) part of refpecs was only conceived for branch updates,
while tags have accepted any changes from upstream unconditionally and
clobbered the local tag object. Changing this behavior has been
discussed as early as 2011[1].
The current behavior doesn't make sense to me, it easily results in
local tags accidentally being clobbered. We could namespace our tags
per-remote and not locally populate refs/tags/*, but as with my
97716d217c ("fetch: add a --prune-tags option and fetch.pruneTags
config", 2018-02-09) it's easier to work around the current
implementation than to fix the root cause.
So this change implements suggestion #1 from Jeff's 2011 E-Mail[1],
"fetch" now only clobbers the tag if either "+" is provided as part of
the refspec, or if "--force" is provided on the command-line.
This also makes it nicely symmetrical with how "tag" itself works when
creating tags. I.e. we refuse to clobber any existing tags unless
"--force" is supplied. Now we can refuse all such clobbering, whether
it would happen by clobbering a local tag with "tag", or by fetching
it from the remote with "fetch".
Ref updates outside refs/{tags,heads/* are still still not symmetrical
with how "git push" works, as discussed in the recently changed
pull-fetch-param.txt documentation. This change brings the two
divergent behaviors more into line with one another. I don't think
there's any reason "fetch" couldn't fully converge with the behavior
used by "push", but that's a topic for another change.
One of the tests added in 31b808a032 ("clone --single: limit the fetch
refspec to fetched branch", 2012-09-20) is being changed to use
--force where a clone would clobber a tag. This changes nothing about
the existing behavior of the test.
1. https://public-inbox.org/git/20111123221658.GA22313@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test suite only incidentally (and unintentionally) tested for the
current behavior of eager tag clobbering on "fetch". This is a
followup to 380efb65df ("push tests: assert re-pushing annotated
tags", 2018-07-31) which tests for it explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The quoted -m'msg' option would mean the same as -mmsg when passed
through the test_force_push_tag helper. Let's instead use a string
with spaces in it, to have a working example in case we need to pass
other whitespace-delimited arguments to git-tag.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix up a logic error in 380efb65df ("push tests: assert re-pushing
annotated tags", 2018-07-31), where the $tag_type_description variable
was assigned to but never used, unlike in the subsequently added
companion test for fetches in 2d216a7ef6 ("fetch tests: add a test for
clobbering tag behavior", 2018-04-29).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test and doc clean-ups.
* ab/fetch-tags-noclobber:
pull doc: fix a long-standing grammar error
fetch tests: correct a comment "remove it" -> "remove them"
push tests: assert re-pushing annotated tags
push tests: add more testing for forced tag pushing
push tests: fix logic error in "push" test assertion
push tests: remove redundant 'git push' invocation
fetch tests: change "Tag" test tag to "testTag"
|
|
Change the test that asserts that lightweight tags can only be
clobbered by a force-push to check do the same tests for annotated
tags.
There used to be less exhaustive tests for this with the code added in
40eff17999 ("push: require force for annotated tags", 2012-11-29), but
Junio removed them in 256b9d70a4 ("push: fix "refs/tags/ hierarchy
cannot be updated without --force"", 2013-01-16) while fixing some of
the behavior around tag pushing.
That change left us without any coverage asserting that pushing and
clobbering annotated tags worked as intended. There was no reason to
suspect that the receive machinery wouldn't behave the same way with
annotated tags, but now we know for sure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the tests added in dbfeddb12e ("push: require force for refs
under refs/tags/", 2012-11-29) to assert that the same behavior
applies various other combinations of command-line option and
refspecs.
Supplying either "+" in refspec or "--force" is sufficient to clobber
the reference. With --no-force we still pay attention to "+" in the
refspec, and vice-versa with clobbering kicking in if there's no "+"
in the refspec but "+" is given.
This is consistent with how refspecs work for branches, where either
"+" or "--force" will enable clobbering, with neither taking priority
over the other.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Chen Bojun
Glen Choo
Eric Sunshine
Anders Kaseorg
Jeff King
Jonathan Tan
Felipe Contreras
Johannes Schindelin
Jiang Xin
Hariom Verma
Jonathan Nieder
SZEDER Gábor
Ævar Arnfjörð Bjarmason