| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in `{...}` groups in order to reduce the number of
possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Take advantage of here-docs to create large blocks of text rather than
using a series of `echo` statements. Not only are here-docs a natural
fit for such a task, but there is less opportunity for a broken
&&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous three commits, We prepared the `t5515` script and the
files in `t/t5515/` for the upcoming change of the default branch name
to `main`. The changes were made over the course of three commits
because the overall patch would have been too big to send to the Git
mailing list for review.
Naturally, the test could not pass in the transitional stages and was
therefore disabled via the `PREPARE_FOR_MAIN_BRANCH` prereq. Now that
the transition is complete, we can re-enable it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of the effort to change the default branch name to `main`, let's
prepare t5515.
In addition to adjusting the references to the branch name itself, this
also requires two commit hashes to be adjusted (actually four, as there
is a SHA-1 _and_ a SHA-256 of both).
That trick was performed by running
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515-*.sh
These commit hashes have been determined manually, of course, by running
the test after adjusting only the branch names, and then copying the
hashes from the log of the failed run.
Note: this patch only touches the t5515 script so far, not the
supporting material in t/t5515/. The resulting patch would have weighed
over 100kB and therefore the Git mailing list would have dropped it. The
files in t/t5515/ will be adjusted in the next two commits. As t5515
would fail without these adjustments, we temporarily skip it via the
`PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The term `master` has a loaded history that serves as a constant
reminder of racial injustice. The Git project has no desire to
perpetuate this and already started avoiding it.
The test suite uses variations of this name for branches other than the
default one. Apart from t3200, where we just addressed this in the
previous commit, those instances can be renamed in an automated manner
because they do not require any changes outside of the test script, so
let's do that.
Seeing as the touched branches have very little (if anything) to do with
the default branch, we choose to use a completely separate naming
scheme: `topic_<number>` (it cannot be `topic-<number>` because t5515
uses the `test_oid` machinery with the term, and that machinery uses
shell variables internally, whose names cannot contain dashes).
This trick was performed by this (GNU) sed invocation:
$ sed -i 's/master\([a-z0-9]\)/topic_\1/g' t/t*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation for SHA-256 migration continues.
* bc/hash-independent-tests-part-8: (21 commits)
t6024: update for SHA-256
t6006: make hash size independent
t6000: abstract away SHA-1-specific constants
t5703: make test work with SHA-256
t5607: make hash size independent
t5318: update for SHA-256
t5515: make test hash independent
t5321: make test hash independent
t5313: make test hash independent
t5309: make test hash independent
t5302: make hash size independent
t4060: make test work with SHA-256
t4211: add test cases for SHA-256
t4211: move SHA-1-specific test cases into a directory
t4013: make test hash independent
t3311: make test work with SHA-256
t3310: make test work with SHA-256
t3309: make test work with SHA-256
t3308: make test work with SHA-256
t3206: make hash size independent
...
|
|
This test contains a large number of data files, mostly using the same
object ID values for refs. Instead of producing two separate sets of
test files, keep the test files using SHA-1 and translate them on the
fly by replacing the SHA-1 values with the values for the current hash
algorithm in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 8cbeba0632 (tests: define GIT_TEST_PROTOCOL_VERSION,
2019-02-25), it has been possible to run tests with a newer protocol
version by setting the GIT_TEST_PROTOCOL_VERSION envvar to a version
number. Tests that assume protocol v0 handle this by explicitly
setting
GIT_TEST_PROTOCOL_VERSION=
or similar constructs like 'test -z "$GIT_TEST_PROTOCOL_VERSION" ||
return 0' to declare that they only handle the default (v0) protocol.
The emphasis there is a bit off: it would be clearer to specify
GIT_TEST_PROTOCOL_VERSION=0 to inform the reader that these tests are
specifically testing and relying on details of protocol v0. Do so.
This way, a reader does not need to know what the default protocol
version is, and the tests can continue to work when the default
protocol version used by Git advances past v0.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few test scripts assign a single LF to $LF, but that is already
given by test-lib.sh to everybody.
Remove the unnecessary reassignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests are also marked with a NEEDSWORK comment.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t5515-fetch-merge-logic removes many, but not all, refs between each test.
This is done by removing the corresponding refs/foo/* files in the .git/refs
hierarchy. However, once "git clone" starts producing packed refs, these refs
will no longer be in the .git/refs hierarchy, but rather listed in
.git/packed-refs. This patch teaches t5515-fetch-merge-logic to remove the
refs using "git update-ref -d" which properly handles packed refs.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We really should have done this long time ago. Existing t5515 test
was written for the specific purpose of catching regression to the
contents of generated FETCH_HEAD file, but it also is a good place
to make sure various fetch configurations do fetch what they intend
to fetch (and nothing else).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was actually reverted in 756373da by Junio. We no longer
support merging the right hand side of a fetchspec in a branch's
branch.$name.merge configuration setting as we interpret these
names as being only those published by the remote we are going to
fetch from.
The older shell based implementation of git-fetch did not report an
error when branch.$name.merge was referencing a branch that does
not exist on the remote and we are running `git fetch` for the
current branch. The new builtin-fetch does notice this failure
and aborts the fetch, thus breaking the tests.
Junio and I kicked it around on #git earlier today and decided that
the best approach here is to error out and tell the user that their
configuration is wrong, as this is likely more user friendly than
silently ignoring the user's request. Since the new builtin-fetch
is already issuing the error there is no code change required, we
just need to remove the bad configuration from our test.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* js/diff-ni:
Get rid of the dependency to GNU diff in the tests
diff --no-index: support /dev/null as filename
diff-ni: fix the diff with standard input
diff: support reading a file from stdin via "-"
|
|
They test the behaviour with just a URL in the command line.
Signed-off-by: Santi B,Ai(Bjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Eric Sunshine
Johannes Schindelin
Junio C Hamano
brian m. carlson
Jonathan Nieder
Jonathan Tan
Elia Pinto
Johannes Sixt
Johan Herland
Shawn O. Pearce
Junio C Hamano
Santi B,Ai(Bjar