| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'git maintenance run' command has an '--auto' option. This is used
by other Git commands such as 'git commit' or 'git fetch' to check if
maintenance should be run after adding data to the repository.
Previously, this --auto option was only used to add the argument to the
'git gc' command as part of the 'gc' task. We will be expanding the
other tasks to perform a check to see if they should do work as part of
the --auto flag, when they are enabled by config.
First, update the 'gc' task to perform the auto check inside the
maintenance process. This prevents running an extra 'git gc --auto'
command when not needed. It also shows a model for other tasks.
Second, use the 'auto_condition' function pointer as a signal for
whether we enable the maintenance task under '--auto'. For instance, we
do not want to enable the 'fetch' task in '--auto' mode, so that
function pointer will remain NULL.
Now that we are not automatically calling 'git gc', a test in
t5514-fetch-multiple.sh must be changed to watch for 'git maintenance'
instead.
We continue to pass the '--auto' option to the 'git gc' command when
necessary, because of the gc.autoDetach config option changes behavior.
Likely, we will want to absorb the daemonizing behavior implied by
gc.autoDetach as a maintenance.autoDetach config option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In multiple remotes mode, git-fetch is launched for n-1 remotes and the
last remote is handled by the current process. Each of these processes
will in turn run 'gc' at the end.
This is not really a problem because even if multiple 'gc --auto' is run
at the same time we still handle it correctly. It does show multiple
"auto packing in the background" messages though. And we may waste some
resources when gc actually runs because we still do some stuff before
checking the lock and moving it to background.
So let's try to avoid that. We should only need one 'gc' run after all
objects and references are added anyway. Add a new option --no-auto-gc
that will be used by those n-1 processes. 'gc --auto' will always run on
the main fetch process (*).
(*) even if we fetch remotes in parallel at some point in future, this
should still be fine because we should "join" all those processes
before this step.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the --multiple option to specify that all arguments are either
groups or remotes. The primary reason for adding this option is
to allow us to re-implement 'git remote update' using fetch.
It would have been nice if this option was not needed, but since
the colon in a refspec is optional, it is in general not possible
to know whether a single, colon-less argument is a remote or a
refspec.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git remote' is meant for managing remotes and 'git fetch' is meant
for actually fetching data from remote repositories. Therefore, it is
not logical that you must use 'git remote update' to fetch from
more than one repository at once.
Add the --all option to 'git fetch', to tell it to attempt to fetch
from all remotes. Also, if --all is not given, the <repository>
argument is allowed to be the name of a group, to allow fetching
from all repositories in the group.
Other options except -v and -q are silently ignored.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Jeff King
Dan Johnson
Jonathan Nieder
Björn Gustavsson