| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, the default branch name is part of aligned output. As we
want to change the default branch name to `main`, which is two
characters shorter than the old default branch name, we will have to
adjust those tests.
Since we use the original default branch name until the entire test
suite has been adjusted accordingly, the touched test cases need to be
guarded by a prereq (that is so far disabled so that they are skipped
for now).
The test cases that depend on those test cases that are newly guarded by
that prereq naturally have to be guarded, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
887952b8c6 ("fetch: optionally allow disabling FETCH_HEAD update",
2020-08-18) introduced the ability to disable writing to FETCH_HEAD
during fetch, but did not suppress the "<source> -> FETCH_HEAD" message
when this ability is used. This message is misleading in this case,
because FETCH_HEAD is not written. Also, because "fetch" is used to
lazy-fetch missing objects in a partial clone, this significantly
clutters up the output in that case since the objects to be fetched are
potentially numerous.
Therefore, suppress this message when --no-write-fetch-head is passed
(but not when --dry-run is set).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run fetch but record the result in remote-tracking branches,
and either if you do nothing with the fetched refs (e.g. you are
merely mirroring) or if you always work from the remote-tracking
refs (e.g. you fetch and then merge origin/branchname separately),
you can get away with having no FETCH_HEAD at all.
Teach "git fetch" a command line option "--[no-]write-fetch-head".
The default is to write FETCH_HEAD, and the option is primarily
meant to be used with the "--no-" prefix to override this default,
because there is no matching fetch.writeFetchHEAD configuration
variable to flip the default to off (in which case, the positive
form may become necessary to defeat it).
Note that under "--dry-run" mode, FETCH_HEAD is never written;
otherwise you'd see list of objects in the file that you do not
actually have. Passing `--write-fetch-head` does not force `git
fetch` to write the file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* ma/test-quote-cleanup:
t4104: modernize and simplify quoting
t: don't spuriously close and reopen quotes
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently we detect the hash algorithm in use by the length of the
object ID. This is inelegant and prevents us from using a different
hash algorithm that is also 256 bits in length.
Since we cannot extend the v2 format in a backward-compatible way, let's
add a v3 format, which is identical, except for the addition of
capabilities, which are prefixed by an at sign. We add "object-format"
as the only capability and reject unknown capabilities, since we do not
have a network connection and therefore cannot negotiate with the other
side.
For compatibility, default to the v2 format for SHA-1 and require v3
for SHA-256.
In t5510, always use format v3 so we can be sure we produce consistent
results across hash algorithms. Since head -n N lists the top N lines
instead of the Nth line, let's run our output through sed to normalize
it and compare it against a fixed value, which will make sure we get
exactly what we're expecting.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ma/test-cleanup:
t: drop debug `cat` calls
t9810: drop debug `cat` call
t4117: check for files using `test_path_is_file`
|
|
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation of test scripts for the day when the object names will
use SHA-256 continues.
* bc/hash-independent-tests-part-7:
t5604: make hash independent
t5601: switch into repository to hash object
t5562: use $ZERO_OID
t5540: make hash size independent
t5537: make hash size independent
t5530: compute results based on object length
t5512: abstract away SHA-1-specific constants
t5510: make hash size independent
t5504: make hash algorithm independent
t5324: make hash size independent
t5319: make test work with SHA-256
t5319: change invalid offset for SHA-256 compatibility
t5318: update for SHA-256
t4300: abstract away SHA-1-specific constants
t4204: make hash size independent
t4202: abstract away SHA-1-specific constants
t4200: make hash size independent
t4134: compute appropriate length constant
t4066: compute index line in diffs
t4054: make hash-size independent
|
|
To prevent long blocking time during a 'git fetch' call, a user
may want to set up a schedule for background 'git fetch' processes.
However, these runs will update the refs/remotes branches due to
the default refspec set in the config when Git adds a remote.
Hence the user will not notice when remote refs are updated during
their foreground fetches. In fact, they may _want_ those refs to
stay put so they can work with the refs from their last foreground
fetch call.
This can be accomplished by overriding the configured refspec using
'--refmap=' along with a custom refspec:
git fetch --refmap='' <remote> +refs/heads/*:refs/hidden/<remote>/*
to populate a custom ref space and download a pack of the new
reachable objects. This kind of call allows a few things to happen:
1. We download a new pack if refs have updated.
2. Since the refs/hidden branches exist, GC will not remove the
newly-downloaded data.
3. With fetch.writeCommitGraph enabled, the refs/hidden refs are
used to update the commit-graph file.
To avoid the refs/hidden directory from filling without bound, the
--prune option can be included. When providing a refspec like this,
the --prune option does not delete remote refs and instead only
deletes refs in the target refspace.
Update the documentation to clarify how '--refmap=""' works and
create tests to guarantee this behavior remains in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use $OID_REGEX instead of hard-coding 40-based regular expressions.
Change invocations of cut with a hard-coded constant to split using a
delimiter instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ds/commit-graph-on-fetch:
commit-graph: fix writing first commit-graph during fetch
t5510-fetch.sh: demonstrate fetch.writeCommitGraph bug
|
|
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While dogfooding, Johannes found a bug in the fetch.writeCommitGraph
config behavior. His example initially happened during a clone with
--recurse-submodules, we found that this happens with the first fetch
after cloning a repository that contains a submodule:
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
In the repo I had cloned, there were really 60 commits to scan, but
only 12 were in the list to write when calling
compute_generation_numbers(). A commit in the list expects to see a
parent, but that parent is not in the list.
A follow-up will fix the bug, but first we create a test that
demonstrates the problem. This test must be careful about an existing
commit-graph file, since GIT_TEST_COMMIT_GRAPH=1 will cause the repo we
are cloning to already have one. This then prevents the incremtnal
commit-graph write during the first 'git fetch'.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A configuration variable tells "git fetch" to write the commit
graph after finishing.
* ds/commit-graph-on-fetch:
fetch: add fetch.writeCommitGraph config setting
|
|
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
't5510-fetch.sh' sources 'lib-httpd.sh' near the end to run a
httpd-specific test, but 'lib-httpd.sh' skips all the rest of the test
script if the dependencies for running httpd tests are not fulfilled.
Alas, recently cdbd70c437 (fetch: add --[no-]show-forced-updates
argument, 2019-06-18) appended a non-httpd-specific test at the end,
and this test is then skipped as well when httpd tests can't be run.
Move this new test earlier in the test script, before 'lib-httpd.sh'
is sourced, so it will be run even when httpd tests aren't.
Also add a comment at the end of this test script to warn against
adding non-httpd-specific tests at the end, in the hope that it will
help prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test '--no-show-forced-updates' in 't5510-fetch.sh' added in
cdbd70c437 (fetch: add --[no-]show-forced-updates argument,
2019-06-18) runs '! test_i18ngrep ...'. This is wrong, because when
running the test with GIT_TEST_GETTEXT_POISON=true, then
'test_i18ngrep' is basically a noop and always returns with success,
the leading ! turns that into a failure, which then fails the test.
Use 'test_i18ngrep ! ...' instead.
This went unnoticed by our GETTEXT_POISON CI builds, because those
builds don't run this test case: in those builds we don't install
Apache, and this test comes after 't5510' sources 'lib-httpd.sh',
which, consequently, skips all the remaining tests, including this
one.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After updating a set of remove refs during a 'git fetch', we walk the
commits in the new ref value and not in the old ref value to discover
if the update was a forced update. This results in two things happening
during the command:
1. The line including the ref update has an additional "(forced-update)"
marker at the end.
2. The ref log for that remote branch includes a bit saying that update
is a forced update.
For many situations, this forced-update message happens infrequently, or
is a small bit of information among many ref updates. Many users ignore
these messages, but the calculation required here slows down their fetches
significantly. Keep in mind that they do not have the opportunity to
calculate a commit-graph file containing the newly-fetched commits, so
these comparisons can be very slow.
Add a '--[no-]show-forced-updates' option that allows a user to skip this
calculation. The only permanent result is dropping the forced-update bit
in the reflog.
Include a new fetch.showForcedUpdates config setting that allows this
behavior without including the argument in every command. The config
setting is overridden by the command-line arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test and doc clean-ups.
* ab/fetch-tags-noclobber:
pull doc: fix a long-standing grammar error
fetch tests: correct a comment "remove it" -> "remove them"
push tests: assert re-pushing annotated tags
push tests: add more testing for forced tag pushing
push tests: fix logic error in "push" test assertion
push tests: remove redundant 'git push' invocation
fetch tests: change "Tag" test tag to "testTag"
|
|
"git fetch $there refs/heads/s" ought to fetch the tip of the
branch 's', but when "refs/heads/refs/heads/s", i.e. a branch whose
name is "refs/heads/s" exists at the same time, fetched that one
instead by mistake. This has been corrected to honor the usual
disambiguation rules for abbreviated refnames.
* jt/refspec-dwim-precedence-fix:
remote: make refspec follow the same disambiguation rule as local refs
|
|
Correct a comment referring to the removal of just the branch to also
refer to the tag. This should have been changed in my
ca3065e7e7 ("fetch tests: add a tag to be deleted to the pruning
tests", 2018-02-09) when the tag deletion was added, but I missed it
at the time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
|
|
When matching a non-wildcard LHS of a refspec against a list of
refs, find_ref_by_name_abbrev() returns the first ref that matches
using any DWIM rules used by refname_match() in refs.c, even if a
better match occurs later in the list of refs.
This causes unexpected behavior when (for example) fetching using
the refspec "refs/heads/s:<something>" from a remote with both
"refs/heads/refs/heads/s" and "refs/heads/s"; even if the former was
inadvertently created, one would still expect the latter to be
fetched. Similarly, when both a tag T and a branch T exist,
fetching T should favor the tag, just like how local refname
disambiguation rule works. But because the code walks over
ls-remote output from the remote, which happens to be sorted in
alphabetical order and has refs/heads/T before refs/tags/T, a
request to fetch T is (mis)interpreted as fetching refs/heads/T.
Update refname_match(), all of whose current callers care only if it
returns non-zero (i.e. matches) to see if an abbreviated name can
mean the full name being tested, so that it returns a positive
integer whose magnitude can be used to tell the precedence, and fix
the find_ref_by_name_abbrev() function not to stop at the first
match but find the match with the highest precedence.
This is based on an earlier work, which special cased only the exact
matches, by Jonathan Tan.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach gc --auto to release pack files before auto packing the repository
to prevent failures when removing them.
Also teach the test 'fetching with auto-gc does not lock up' to complain
when it is no longer triggering an auto packing of the repository.
Fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a many tests assumed that newly created refs are made as
loose refs using the files backend, which have been updated to use
proper plumbing like rev-parse and update-ref, to avoid breakage
once we start using different ref backends.
* cc/tests-without-assuming-ref-files-backend:
t990X: use '.git/objects' as 'deep inside .git' path
t: make many tests depend less on the refs being files
|
|
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.
This will make clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.
This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* pk/test-avoid-pipe-hiding-exit-status:
test: avoid pipes in git related commands for test
|
|
Avoid using pipes downstream of Git commands since the exit codes
of commands upstream of pipes get swallowed, thus potentially
hiding failure of those commands. Instead, capture Git command
output to a file and apply the downstream command(s) to that file.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify how configured fetch refspecs interact with the "--prune"
option of "git fetch", and also add a handy short-hand for getting
rid of stale tags that are locally held.
* ab/fetch-prune:
fetch: make the --prune-tags work with <url>
fetch: add a --prune-tags option and fetch.pruneTags config
fetch tests: add scaffolding for the new fetch.pruneTags
git-fetch & config doc: link to the new PRUNING section
git remote doc: correct dangerous lies about what prune does
git fetch doc: add a new section to explain the ins & outs of pruning
fetch tests: fetch <url> <spec> as well as fetch [<remote>]
fetch tests: expand case/esac for later change
fetch tests: double quote a variable for interpolation
fetch tests: test --prune and refspec interaction
fetch tests: add a tag to be deleted to the pruning tests
fetch tests: re-arrange arguments for future readability
fetch tests: refactor in preparation for testing tag pruning
remote: add a macro for "refs/tags/*:refs/tags/*"
fetch: stop accessing "remote" variable indirectly
fetch: trivially refactor assignment to ref_nr
fetch: don't redundantly NULL something calloc() gave us
|
|
Make the new --prune-tags option work properly when git-fetch is
invoked with a <url> parameter instead of a <remote name>
parameter.
This change is split off from the introduction of --prune-tags due to
the relative complexity of munging the incoming argv, which is easier
to review as a separate change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch.pruneTags configuration doesn't exist yet, but will be added
in a subsequent commit. Since testing for it requires adding new
parameters to the test_configured_prune function it's easier to review
this patch first to assert that no functional changes are introduced
yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote URL is supplied on the command-line the internals of the
fetch are different, in particular the code in get_ref_map(). An
earlier version of the subsequent fetch.pruneTags patch hid a segfault
because the difference wasn't tested for.
Now all the tests are run as both of the variants of:
git fetch
git -c [...] fetch $(git config remote.origin.url) $(git config remote.origin.fetch)
I'm using -c because while the [fetch] config just set by
set_config_tristate will be picked up, the remote.origin.* config
won't override it as intended.
Work around that and turn this into a purely command-line test by
always setting the variables on the command-line, and translate any
setting of remote.origin.X into fetch.X.
The reason for choosing the names "name" and "link" as opposed to
e.g. "named" and "url" is because they're the same length, which makes
the test output easier to read as it will be aligned.
Due to shellscript quoting madness it's not worthwhile to do all of
this within a test_expect_success, but do the parts that can easily be
done there, including the one-time setting of variables that don't
change between runs to be used by subsequent runs in the 'prune_type
setup' test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expand a compact case/esac statement for a later change that'll add
more logic to the body of the "*" case. This is a whitespace-only
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the $cmdline variable contains arguments with spaces they won't be
interpolated correctly, since the body of the test is single quoted,
and because test-lib.sh does its own eval().
This will be used in a subsequent commit to pass arguments that need
to be quoted to git-fetch, i.e. a file:// path to fetch, which will
have a space in it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test for the interaction between explicitly provided refspecs
and fetch.prune.
There's no point in adding this boilerplate to every combination of
unset/false/true, it's instructive and sufficient to show that no
matter if the variable is unset, false or true the refspec on the
command-line overrides any configuration variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a tag to be deleted to the fetch --prune tests. The tag is always
kept for now, which is the expected behavior, but now I can add a test
for tag pruning in a later commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Re-arrange the arguments to the test_configured_prune() function used
in this test to pass the arguments to --fetch last. A subsequent
change will test for more elaborate fetch arguments, including long
refspecs. It'll be more readable to be able to wrap those on a new
line of their own.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit this function will learn to test for tag
pruning, prepare for that by making space for more variables, and
making it clear that "expected" here refers to branches.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the tests in 't5510-fetch.sh' checks the output of 'git fetch'
using 'test_i18ngrep', and while doing so it prefilters the output
with 'grep' before piping the result into 'test_i18ngrep'.
This prefiltering is unnecessary, with the appropriate pattern
'test_i18ngrep' can do it all by itself. Furthermore, piping data
into 'test_i18ngrep' will interfere with the linting that will be
added in a later patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix of a test in a topic that has already been merged to 'master'.
* nd/fetch-ref-summary:
t5510: skip tests under GETTEXT_POISON build
|
|
Skip tests when running under GETTEXT_POISON build and run them with
C_LOCALE_OUTPUT prerequisite.
These tests are irrelevant under GETTEXT_POISON because they test text
output alignment which GETTEXT_POISON turns useless.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Derrick Stolee
Jonathan Tan
Martin Ågren
brian m. carlson
Elijah Newren
SZEDER Gábor
Ævar Arnfjörð Bjarmason
Kim Gybels
David Turner
Pratik Karki
Vasco Almeida