| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Hotfix of a test in a topic that has already been merged to 'master'.
* nd/fetch-ref-summary:
t5510: skip tests under GETTEXT_POISON build
|
|
Skip tests when running under GETTEXT_POISON build and run them with
C_LOCALE_OUTPUT prerequisite.
These tests are irrelevant under GETTEXT_POISON because they test text
output alignment which GETTEXT_POISON turns useless.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
|
|
In the "remote -> local" line, if either ref is a substring of the
other, the common part in the other string is replaced with "*". For
example
abc -> origin/abc
refs/pull/123/head -> pull/123
become
abc -> origin/*
refs/*/head -> pull/123
Activated with fetch.output=compact.
For the record, this output is not perfect. A single giant ref can
push all refs very far to the right and likely be wrapped around. We
may have a few options:
- exclude these long lines smarter
- break the line after "->", exclude it from column width calculation
- implement a new format, { -> origin/}foo, which makes the problem
go away at the cost of a bit harder to read
- reverse all the arrows so we have "* <- looong-ref", again still
hard to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do align "remote -> local" output by allocating 10 columns to
"remote". That produces aligned output only for short refs. An extra
pass is performed to find the longest remote ref name (that does not
produce a line longer than terminal width) to produce better aligned
output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/close-packs-before-gc:
t5510: run auto-gc in the foreground
|
|
The last test added to 't5510-fetch' in 0898c9628104 (fetch: release
pack files before garbage-collecting, 2016-01-13) may sporadically
trigger following error message from the test harness:
rm: cannot remove 'trash directory.t5510-fetch/auto-gc/.git': Directory not empty
The test in question forces an auto-gc, which, if the system supports
it, runs in the background by default, and occasionally takes long
enough for the test to finish and for 'test_done' to start
housekeeping. This can lead to the test's 'git gc --auto' in the
background and 'test_done's 'rm -rf $trash' in the foreground racing
each other to create and delete files and directories. It might just
happen that 'git gc' re-creates a directory that 'rm -rf' already
visited and removed, which ultimately triggers the above error.
Disable detaching the auto-gc process to ensure that it finishes
before the test can continue, thus avoiding this racy situation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A small future-proofing of a test added recently.
* js/close-packs-before-gc:
t5510: do not leave changed cwd
|
|
t5510 carefully keeps the cwd at the test root by using either subshells
or explicit cd'ing back to the root. Use a subshell for the last
subtest, too.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
|
|
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths that run "gc --auto" before exiting kept packfiles
mapped and left the file descriptors to them open, which was not
friendly to systems that cannot remove files that are open. They
now close the packs before doing so.
* js/close-packs-before-gc:
receive-pack: release pack files before garbage-collecting
merge: release pack files before garbage-collecting
am: release pack files before garbage-collecting
fetch: release pack files before garbage-collecting
|
|
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
This fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the introduction of opportunisitic updates of remote-tracking
branches, started at around f2690487 (fetch: opportunistically
update tracking refs, 2013-05-11) with a few updates in v1.8.4 era,
the remote.*.fetch configuration always kicks in even when a refspec
to specify what to fetch is given on the command line, and there is
no way to disable or override it per-invocation.
Teach the command to pay attention to the --refmap=<lhs>:<rhs>
command-line options that can be used to override the use of
configured remote.*.fetch as the refmap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
|
|
Protect refs in a hierarchy that can come from more than one remote
hierarcies from incorrect removal by "git fetch --prune".
* cn/fetch-prune-overlapping-destination:
fetch: handle overlaping refspecs on --prune
fetch: add a failing test for prunning with overlapping refspecs
|
|
We need to consider that a remote-tracking branch may match more than
one rhs of a fetch refspec. In such a case, it is not enough to stop at
the first match but look at all of the matches in order to determine
whether a head is stale.
To this goal, introduce a variant of query_refspecs which returns all of
the matching refspecs and loop over those answers to check for
staleness.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On MINGW, "pwd" is defined as "pwd -W" in test-lib.sh. This usually is the
right thing, but the absolute Windows path with a colon confuses rsync. We
could use $PWD in this case to work around the issue, but in fact there is
no need to use an absolute path in the first place, so get rid of it.
This was discovered in the context of the mingwGitDevEnv project and only
did not surface before with msysgit because the latter does not ship
rsync.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote has multiple fetch refspecs and these overlap in the
target namespace, fetch may prune a remote-tracking branch which still
exists in the remote. The test uses a popular form of this, by putting
pull requests as stored in a popular hosting platform alongside "real"
remote-tracking branches.
The fetch command makes a decision of whether to prune based
on the first matching refspec, which in this case is insufficient, as it
covers the pull request names. This pair of refspecs does work as
expected if the more "specific" refspec is the first in the list.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
|
|
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
|
|
Currently fetching a one-level ref like "refs/foo" does not
work consistently. The outer "git fetch" program filters the
list of refs, checking each against check_refname_format.
Then it feeds the result to do_fetch_pack to actually
negotiate the haves/wants and get the pack. The fetch-pack
code does its own filter, and it behaves differently.
The fetch-pack filter looks for refs in "refs/", and then
feeds everything _after_ the slash (i.e., just "foo") into
check_refname_format. But check_refname_format is not
designed to look at a partial refname. It complains that the
ref has only one component, thinking it is at the root
(i.e., alongside "HEAD"), when in reality we just fed it a
partial refname.
As a result, we omit a ref like "refs/foo" from the pack
request, even though "git fetch" then tries to store the
resulting ref. If we happen to get the object anyway (e.g.,
because the ref is contained in another ref we are
fetching), then the fetch succeeds. But if it is a unique
object, we fail when trying to update "refs/foo".
We can fix this by just passing the whole refname into
check_refname_format; we know the part we were omitting is
"refs/", which is acceptable in a refname. This at least
makes the checks consistent with each other.
This problem happens most commonly with "refs/stash", which
is the only one-level ref in wide use. However, our test
does not use "refs/stash", as we may later want to restrict
it specifically (not because it is one-level, but because
of the semantics of stashes).
We may also want to do away with the multiple levels of
filtering (which can cause problems when they are out of
sync), or even forbid one-level refs entirely. However,
those decisions can come later; this fixes the most
immediate problem, which is the mismatch between the two.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have a remote-tracking branch named "frotz/nitfol" from a
previous fetch, and the upstream now has a branch named "frotz",
fetch would fail to remove "frotz/nitfol" with a "git fetch --prune"
from the upstream. git would inform the user to use "git remote
prune" to fix the problem.
Change the way "fetch --prune" works by moving the pruning operation
before the fetching operation. This way, instead of warning the user
of a conflict, it autmatically fixes it.
Signed-off-by: Tom Miller <jackerran@gmail.com>
Tested-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If "fetch --prune" is run with no new refs to fetch, but it has refs
to prune. Then, the header url is not printed as it would if there were
new refs to fetch.
Output before this patch:
$ git fetch --prune remote-with-no-new-refs
x [deleted] (none) -> origin/world
Output after this patch:
$ git fetch --prune remote-with-no-new-refs
From https://github.com/git/git
x [deleted] (none) -> origin/test
Signed-off-by: Tom Miller <jackerran@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old behavior of "fetch --prune" was to prune whatever was being
fetched. In particular, "fetch --prune --tags" caused tags not only
to be fetched, but also to be pruned. This is inappropriate because
there is only one tags namespace that is shared among the local
repository and all remotes. Therefore, if the user defines a local
tag and then runs "git fetch --prune --tags", then the local tag is
deleted. Moreover, "--prune" and "--tags" can also be configured via
fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it
even less obvious that an invocation of "git fetch" could result in
tag lossage.
Since the command "git remote update" invokes "git fetch", it had the
same problem.
The command "git remote prune", on the other hand, disregarded the
setting of remote.<name>.tagopt, and so its behavior was inconsistent
with that of the other commands.
So the old behavior made it too easy to lose tags. To fix this
problem, change "fetch --prune" to prune references based only on
refspecs specified explicitly by the user, either on the command line
or via remote.<name>.fetch. Thus, tags are no longer made subject to
pruning by the --tags option or the remote.<name>.tagopt setting.
However, tags *are* still subject to pruning if they are fetched as
part of a refspec, and that is good. For example:
* On the command line,
git fetch --prune 'refs/tags/*:refs/tags/*'
causes tags, and only tags, to be fetched and pruned, and is
therefore a simple way for the user to get the equivalent of the old
behavior of "--prune --tag".
* For a remote that was configured with the "--mirror" option, the
configuration is set to include
[remote "name"]
fetch = +refs/*:refs/*
, which causes tags to be subject to pruning along with all other
references. This is the behavior that will typically be desired for
a mirror.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, fetch's "--tags" option was considered equivalent to
specifying the refspec "refs/tags/*:refs/tags/*" on the command line;
in particular, it caused the remote.<name>.refspec configuration to be
ignored.
But it is not very useful to fetch tags without also fetching other
references, whereas it *is* quite useful to be able to fetch tags *in
addition to* other references. So change the semantics of this option
to do the latter.
If a user wants to fetch *only* tags, then it is still possible to
specifying an explicit refspec:
git fetch <remote> 'refs/tags/*:refs/tags/*'
Please note that the documentation prior to 1.8.0.3 was ambiguous
about this aspect of "fetch --tags" behavior. Commit
f0cb2f137c 2012-12-14 fetch --tags: clarify documentation
made the documentation match the old behavior. This commit changes
the documentation to match the new behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch --prune --tags" is currently interpreted as follows:
* "--tags" is equivalent to specifying a refspec
"refs/tags/*:refs/tags/*", and supersedes any default refspecs
configured via remote.$REMOTE.fetch.
* "--prune" only operates on the refspecs being fetched.
Therefore, "git fetch --prune --tags" prunes tags in refs/tags/* but
does not fetch or prune other references. The fact that this command
does not prune references outside of refs/tags/* was previously
untested. So add a test that verifies the status quo.
However, the status quo is surprising, so it will be changed later in
this patch series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" was being used with contrived refspecs to create tags and
remote-tracking branches in test repositories in preparation for the
actual tests. This is obscure and also makes one wonder whether this
is indeed just preparation or whether some side-effect of "git fetch"
is being tested.
So use the more straightforward commands "git tag" / "git update-ref"
when preparing branches in test repositories.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix an apparent copy-paste error: A few lines earlier, a tag
"refs/tags/sometag" is created. Check for the (non-)existence of that
tag, not "somebranch", which is otherwise never mentioned in the
script.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow fetch.prune and remote.*.prune configuration variables to be set,
and "git fetch" to behave as if "--prune" is given.
"git fetch" that honors remote.*.prune is fine, but I wonder if we
should somehow make "git push" aware of it as well. Perhaps
remote.*.prune should not be just a boolean, but a 4-way "none",
"push", "fetch", "both"?
* ms/fetch-prune-configuration:
fetch: make --prune configurable
|
|
Without "git fetch --prune", remote-tracking branches for a branch
the other side already has removed will stay forever. Some people
want to always run "git fetch --prune".
To accommodate users who want to either prune always or when fetching
from a particular remote, add two new configuration variables
"fetch.prune" and "remote.<name>.prune":
- "fetch.prune" allows to enable prune for all fetch operations.
- "remote.<name>.prune" allows to change the behaviour per remote.
The latter will naturally override the former, and the --[no-]prune
option from the command line will override the configured default.
Since --prune is a potentially destructive operation (Git doesn't
keep reflogs for deleted references yet), we don't want to prune
without users consent, so this configuration will not be on by
default.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit f269048 (fetch: opportunistically update tracking refs,
2013-05-11) we update tracking refs opportunistically when fetching
remote branches. However, if there is a configured non-pattern refspec
that does not match any of the refspecs given on the command line then a
fatal error occurs.
Fix this by setting the "missing_ok" flag when calling get_fetch_map.
Test-added-by: Jeff King <peff@peff.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we run a regular "git fetch" without arguments, we
update the tracking refs according to the configured
refspec. However, when we run "git fetch origin master" (or
"git pull origin master"), we do not look at the configured
refspecs at all, and just update FETCH_HEAD.
We miss an opportunity to update "refs/remotes/origin/master"
(or whatever the user has configured). Some users find this
confusing, because they would want to do further comparisons
against the old state of the remote master, like:
$ git pull origin master
$ git log HEAD...origin/master
In the currnet code, they are comparing against whatever
commit happened to be in origin/master from the last time
they did a complete "git fetch". This patch will update a
ref from the RHS of a configured refspec whenever we happen
to be fetching its LHS. That makes the case above work.
The downside is that any users who really care about whether
and when their tracking branches are updated may be
surprised.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have three sequential tests for for whether tracking refs
are updated by various fetches and pulls; the first two
should not update the ref, and the third should. Each test
depends on the state left by the test before.
This is fragile (a failing early test will confuse later
tests), and means we cannot add more "should update" tests
after the third one.
Let's instead save the initial state before these tests, and
then reset to a known state before running each test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bundle" did not record boundary commits correctly when there
are many of them.
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
|
|
The 'name' field passed to add_pending_object() is used to later
deduplicate in object_array_remove_duplicates().
git-bundle had a bug in this area since 18449ab (git-bundle: avoid
packing objects which are in the prerequisites, 2007-03-08): it passed
the name of each boundary object in a static buffer. In other words,
all that object_array_remove_duplicates() saw was the name of the
*last* added boundary object.
The recent switch to a strbuf in bc2fed4 (bundle: use a strbuf to scan
the log for boundary commits, 2012-02-22) made this slightly worse: we
now free the buffer at the end, so it is not even guaranteed that it
still points into addressable memory by the time object_array_remove_
duplicates looks at it. On the plus side however, it was now
detectable by valgrind.
The fix is easy: pass a copy of the string to add_pending_object.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last test descended into a subdir without ever re-emerging, which
is not so nice to the next test writer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not so much a conversion as a "strip everything up to and
including the first blank line", but it will come in handy again.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
|
|
"git log frotz" can DWIM to "refs/remotes/frotz/HEAD", but in the remote
access context, "git fetch frotz" to fetch what the other side happened to
have fetched from what it calls 'frotz' (which may not have any relation
to what we consider is 'frotz') the last time would not make much sense,
so the fetch rules table did not include "refs/remotes/%.*s/HEAD".
When the user really wants to, "git fetch $there remotes/frotz/HEAD" would
let her do so anyway, so this is not about safety or security; it merely
is about confusion avoidance and discouraging meaningless usage.
Specifically, it is _not_ about ambiguity avoidance. A name that would
become ambiguous if we use the same rules table for both fetch and local
rev-parse would be ambiguous locally at the remote side.
So for the same reason as we added rule to allow "git fetch $there v1.0"
instead of "git fetch $there tags/v1.0" in the previous commit, here is a
bit longer rope for the users, which incidentally simplifies our code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --tags is specified, add that refspec to the list given to
prune_refs so it knows to treat it as a filter on what refs to
should consider for prunning. This way
git fetch --prune --tags origin
only prunes tags and doesn't delete the branch refs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The failures will be fixed in later commits.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
|
Junio C Hamano
Vasco Almeida
Nguyễn Thái Ngọc Duy
SZEDER Gábor
Michael J Gruber
Jeff King
Johannes Schindelin
Elia Pinto
Carlos Martín Nieto
Sebastian Schuberth
Tom Miller
Michael Haggerty
Michael Schubert
John Keeping
Marc Branchaud
Thomas Rast
Joey Hess
Carlos Martín Nieto
Jonathan Nieder