summaryrefslogtreecommitdiff
path: root/t/t5510-fetch.sh
AgeCommit message (Collapse)AuthorFilesLines
2009-03-10rsync transport: allow local paths, and fix testsLibravatar Johannes Schindelin1-19/+20
Earlier, the rsync tests were disabled by default, as they needed a running rsyncd daemon. This was only due to the limitation that our rsync transport only allowed full URLs of the form rsync://<host>/<path> Relaxing the URLs to allow rsync:<path> permitted the change in the tests to run whenever rsync is available, without requiring a fully configured and running rsyncd. While at it, the tests were fixed so that they run in directories with a space in their name. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-21Merge branch 'js/maint-fetch-update-head'Libravatar Junio C Hamano1-0/+12
* js/maint-fetch-update-head: pull: allow "git pull origin $something:$current_branch" into an unborn branch Fix fetch/pull when run without --update-head-ok Conflicts: t/t5510-fetch.sh
2008-10-13Fix fetch/pull when run without --update-head-okLibravatar Johannes Schindelin1-0/+12
Some confusing tutorials suggested that it would be a good idea to fetch into the current branch with something like this: git fetch origin master:master (or even worse: the same command line with "pull" instead of "fetch"). While it might make sense to store what you want to pull, it typically is plain wrong when the current branch is "master". This should only be allowed when (an incorrect) "git pull origin master:master" tries to work around by giving --update-head-ok to underlying "git fetch", and otherwise we should refuse it, but somewhere along the lines we lost that behavior. The check for the current branch is now _only_ performed in non-bare repositories, which is an improvement from the original behaviour. Some newer tests were depending on the broken behaviour of "git fetch" this patch fixes, and have been adjusted. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-21t5510: test "git fetch" following tags minimallyLibravatar Junio C Hamano1-0/+20
When "git fetch" auto-follows tags, it should not download excess ones. This new test makes sure that condition. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t3600 - t6999)Libravatar Nanako Shiraishi1-1/+1
Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-6/+6
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-18clean up error conventions of remote.c:match_explicitLibravatar Jeff King1-1/+9
match_explicit is called for each push refspec to try to fully resolve the source and destination sides of the refspec. Currently, we look at each refspec and report errors on both the source and the dest side before aborting. It makes sense to report errors for each refspec, since an error in one is independent of an error in the other. However, reporting errors on the 'dst' side of a refspec if there has been an error on the 'src' side does not necessarily make sense, since the interpretation of the 'dst' side depends on the 'src' side (for example, when creating a new unqualified remote ref, we use the same type as the src ref). This patch lets match_explicit return early when the src side of the refspec is bogus. We still look at all of the refspecs before aborting the push, though. At the same time, we clean up the call signature, which previously took an extra "errs" flag. This was pointless, as we didn't act on that flag, but rather just passed it back to the caller. Instead, we now use the more traditional "return -1" to signal an error, and the caller aggregates the error count. This change fixes two bugs, as well: - the early return avoids a segfault when passing a NULL matched_src to guess_ref() - the check for multiple sources pointing to a single dest aborted if the "err" flag was set. Presumably the intent was not to bother with the check if we had no matched_src. However, since the err flag was passed in from the caller, we might abort the check just because a previous refspec had a problem, which doesn't make sense. In practice, this didn't matter, since due to the error flag we end up aborting the push anyway. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13add test_cmp function for test scriptsLibravatar Jeff King1-1/+1
Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-6/+6
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-04t5510: add a bit more tests for fetchLibravatar Junio C Hamano1-0/+42
"git pull/fetch" that gets explicit refspecs from the command line should not update configured tracking refs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-04Merge branch 'sp/refspec-match'Libravatar Junio C Hamano1-0/+25
* sp/refspec-match: refactor fetch's ref matching to use refname_match() push: use same rules as git-rev-parse to resolve refspecs add refname_match() push: support pushing HEAD to real branch name
2007-11-22Merge branch 'maint'Libravatar Junio C Hamano1-0/+13
* maint: Make test scripts executable. bundle create: keep symbolic refs' names instead of resolving them
2007-11-22bundle create: keep symbolic refs' names instead of resolving themLibravatar Johannes Schindelin1-0/+13
When creating a bundle, symbolic refs used to be resolved to the non-symbolic refs they point to before being written to the list of contained refs. I.e. "git bundle create a1.bundle HEAD master" would show something like 388afe7881b33102fada216dd07806728773c011 refs/heads/master 388afe7881b33102fada216dd07806728773c011 refs/heads/master instead of 388afe7881b33102fada216dd07806728773c011 HEAD 388afe7881b33102fada216dd07806728773c011 refs/heads/master Introduce a special handling so that the symbolic refs are listed with the names passed on the command line. Noticed by Santi Béjar. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-18refactor fetch's ref matching to use refname_match()Libravatar Steffen Prohaska1-0/+25
The old rules used by fetch were coded as a series of ifs. The old rules are: 1) match full refname if it starts with "refs/" or matches "HEAD" 2) verify that full refname starts with "refs/" 3) match abbreviated name in "refs/" if it starts with "heads/", "tags/", or "remotes/". 4) match abbreviated name in "refs/heads/" This is replaced by the new rules a) match full refname b) match abbreviated name prefixed with "refs/" c) match abbreviated name prefixed with "refs/heads/" The details of the new rules are different from the old rules. We no longer verify that the full refname starts with "refs/". The new rule (a) matches any full string. The old rules (1) and (2) were stricter. Now, the caller is responsible for using sensible full refnames. This should be the case for the current code. The new rule (b) is less strict than old rule (3). The new rule accepts abbreviated names that start with a non-standard prefix below "refs/". Despite this modifications the new rules should handle all cases as expected. Two tests are added to verify that fetch does not resolve short tags or HEAD in remotes. We may even think about loosening the rules a bit more and unify them with the rev-parse rules. This would be done by replacing ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test would break. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-04Fix an infinite loop in sq_quote_buf().Libravatar Johannes Sixt1-0/+7
sq_quote_buf() treats single-quotes and exclamation marks specially, but it incorrectly parsed the input for single-quotes and backslashes. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-16fetch: if not fetching from default remote, ignore default mergeLibravatar Johannes Schindelin1-0/+8
When doing "git fetch <remote>" on a remote that does not have the branch referenced in branch.<current-branch>.merge, git fetch failed. It failed because it tried to add the "merge" ref to the refs to be fetched. Fix that. And add a test case. Incidentally, this unconvered a bug in our own test suite, where "git pull <some-path>" was expected to merge the ref given in the defaults, even if not pulling from the default remote. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-15Added a test for fetching remote tags when there is not tags.Libravatar Väinö Järvelä1-0/+12
When a user runs "git fetch -t", git crashes when it doesn't find any tags on the remote repository. Signed-off-by: Väinö Järvelä <v@pp.inet.fi> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-01fetch/push: readd rsync supportLibravatar Johannes Schindelin1-0/+35
We lost rsync support when transitioning from shell to C. Support it again (even if the transport is technically deprecated, some people just do not have any chance to use anything else). Also, add a test to t5510. Since rsync transport is not configured by default on most machines, and especially not such that you can write to rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by setting the environment variable TEST_RSYNC. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-10allow git-bundle to create bottomless bundleLibravatar Junio C Hamano1-0/+8
While "git bundle" was a useful way to sneakernet incremental changes, we did not allow: $ git bundle create v2.6.20.bndl v2.6.20 to create a bundle that contains the whole history to a well-known good revision. Such a bundle can be mirrored everywhere, and people can prime their repository with it to reduce the load on the repository that serves near the tip of the development. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-03-12Fix t5510-fetch's use of sedLibravatar Shawn O. Pearce1-1/+7
POSIX says sed may add a trailing LF if there isn't already one there. We shouldn't rely on it not adding that LF, as some systems (Mac OS X for example) will add it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-07git-bundle: avoid packing objects which are in the prerequisitesLibravatar Johannes Schindelin1-0/+11
When saying something like "--since=1.day.ago" or "--max-count=5", git-bundle finds the boundary commits which are recorded as prerequisites. However, it failed to tell pack-objects _not_ to pack the objects which are in these. Fix that. And add a test for that. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-06bundle: fix wrong check of read_header()'s return value & add testsLibravatar Johannes Schindelin1-0/+21
If read_header() fails, it returns <0, not 0. Further, an open(/dev/null) was not checked for errors. Also, this adds two tests to make sure that the bundle file looks correct, by checking if it has the header has the expected form, and that the pack contains the right amount of objects. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-22Add git-bundle: move objects and references by archiveLibravatar Johannes Schindelin1-1/+27
Some workflows require use of repositories on machines that cannot be connected, preventing use of git-fetch / git-push to transport objects and references between the repositories. git-bundle provides an alternate transport mechanism, effectively allowing git-fetch and git-pull to operate using sneakernet transport. `git-bundle create` allows the user to create a bundle containing one or more branches or tags, but with specified basis assumed to exist on the target repository. At the receiving end, git-bundle acts like git-fetch-pack, allowing the user to invoke git-fetch or git-pull using the bundle file as the URL. git-fetch and git-ls-remote determine they have a bundle URL by checking that the URL points to a file, but are otherwise unchanged in operation with bundles. The original patch was done by Mark Levedahl <mdl123@verizon.net>. It was updated to make git-bundle a builtin, and get rid of the tar format: now, the first line is supposed to say "# v2 git bundle", the next lines either contain a prerequisite ("-" followed by the hash of the needed commit), or a ref (the hash of a commit, followed by the name of the ref), and finally the pack. As a result, the bundle argument can be "-" now. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-5/+5
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-12use 'init' instead of 'init-db' for shipped docs and toolsLibravatar Nicolas Pitre1-1/+1
While 'init-db' still is and probably will always remain a valid git command for obvious backward compatibility reasons, it would be a good idea to move shipped tools and docs to using 'init' instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-19Do not create $GIT_DIR/remotes/ directory anymore.Libravatar Junio C Hamano1-4/+3
Because we do not use --no-separate-remote anymore, there is no reason to create that directory from the template. t5510 test is updated to test both $GIT_DIR/remotes/ based configuration and $GIT_DIR/config variable (credits to Johannes). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-19git-fetch: follow lightweit tags as well.Libravatar Junio C Hamano1-0/+16
This side-ports commit fd19f620 from Cogito, in which I fixed exactly the same bug. Somehow nobody noticed this for a long time in git. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-24Add test for the default merges in fetch.Libravatar Santi Béjar1-0/+25
[jc: with minor fix-ups] Signed-off-by: Santi Béjar <sbejar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-24Add t5510 to test per branch configuration affecting git-fetch.Libravatar Junio C Hamano1-0/+44
Signed-off-by: Junio C Hamano <junkio@cox.net>