| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some confusing tutorials suggested that it would be a good idea to fetch
into the current branch with something like this:
git fetch origin master:master
(or even worse: the same command line with "pull" instead of "fetch").
While it might make sense to store what you want to pull, it typically is
plain wrong when the current branch is "master". This should only be
allowed when (an incorrect) "git pull origin master:master" tries to work
around by giving --update-head-ok to underlying "git fetch", and otherwise
we should refuse it, but somewhere along the lines we lost that behavior.
The check for the current branch is now _only_ performed in non-bare
repositories, which is an improvement from the original behaviour.
Some newer tests were depending on the broken behaviour of "git fetch"
this patch fixes, and have been adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull/fetch" that gets explicit refspecs from the command line should
not update configured tracking refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
|
|
* maint:
Make test scripts executable.
bundle create: keep symbolic refs' names instead of resolving them
|
|
When creating a bundle, symbolic refs used to be resolved to the
non-symbolic refs they point to before being written to the list
of contained refs. I.e. "git bundle create a1.bundle HEAD master"
would show something like
388afe7881b33102fada216dd07806728773c011 refs/heads/master
388afe7881b33102fada216dd07806728773c011 refs/heads/master
instead of
388afe7881b33102fada216dd07806728773c011 HEAD
388afe7881b33102fada216dd07806728773c011 refs/heads/master
Introduce a special handling so that the symbolic refs are listed
with the names passed on the command line.
Noticed by Santi Béjar.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old rules used by fetch were coded as a series of ifs. The old
rules are:
1) match full refname if it starts with "refs/" or matches "HEAD"
2) verify that full refname starts with "refs/"
3) match abbreviated name in "refs/" if it starts with "heads/",
"tags/", or "remotes/".
4) match abbreviated name in "refs/heads/"
This is replaced by the new rules
a) match full refname
b) match abbreviated name prefixed with "refs/"
c) match abbreviated name prefixed with "refs/heads/"
The details of the new rules are different from the old rules. We no
longer verify that the full refname starts with "refs/". The new rule
(a) matches any full string. The old rules (1) and (2) were stricter.
Now, the caller is responsible for using sensible full refnames. This
should be the case for the current code. The new rule (b) is less
strict than old rule (3). The new rule accepts abbreviated names that
start with a non-standard prefix below "refs/".
Despite this modifications the new rules should handle all cases as
expected. Two tests are added to verify that fetch does not resolve
short tags or HEAD in remotes.
We may even think about loosening the rules a bit more and unify them
with the rev-parse rules. This would be done by replacing
ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test
would break.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sq_quote_buf() treats single-quotes and exclamation marks specially, but
it incorrectly parsed the input for single-quotes and backslashes.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing "git fetch <remote>" on a remote that does not have the
branch referenced in branch.<current-branch>.merge, git fetch failed.
It failed because it tried to add the "merge" ref to the refs to be
fetched.
Fix that. And add a test case.
Incidentally, this unconvered a bug in our own test suite, where
"git pull <some-path>" was expected to merge the ref given in the
defaults, even if not pulling from the default remote.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When a user runs "git fetch -t", git crashes when it doesn't find any
tags on the remote repository.
Signed-off-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
We lost rsync support when transitioning from shell to C. Support it
again (even if the transport is technically deprecated, some people just
do not have any chance to use anything else).
Also, add a test to t5510. Since rsync transport is not configured by
default on most machines, and especially not such that you can write to
rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by
setting the environment variable TEST_RSYNC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIX says sed may add a trailing LF if there isn't already
one there. We shouldn't rely on it not adding that LF, as
some systems (Mac OS X for example) will add it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When saying something like "--since=1.day.ago" or "--max-count=5",
git-bundle finds the boundary commits which are recorded as
prerequisites. However, it failed to tell pack-objects _not_ to
pack the objects which are in these.
Fix that. And add a test for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If read_header() fails, it returns <0, not 0. Further, an open(/dev/null)
was not checked for errors.
Also, this adds two tests to make sure that the bundle file looks
correct, by checking if it has the header has the expected form, and that
the pack contains the right amount of objects.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Because we do not use --no-separate-remote anymore, there is no
reason to create that directory from the template.
t5510 test is updated to test both $GIT_DIR/remotes/ based
configuration and $GIT_DIR/config variable (credits to
Johannes).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This side-ports commit fd19f620 from Cogito, in which I fixed
exactly the same bug. Somehow nobody noticed this for a long
time in git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: with minor fix-ups]
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Johannes Schindelin
Nanako Shiraishi
Stephan Beyer
Jeff King
Junio C Hamano
Steffen Prohaska
Johannes Sixt
Väinö Järvelä
Shawn O. Pearce
Tom Prince
Nicolas Pitre
Junio C Hamano
Santi Béjar