| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test uses a subshell within a subshell but is formatted in such a
way as to suggests that the inner subshell is a sibling rather than a
child, which makes it difficult to digest the test's structure and
intent.
Worse, the inner subshell performs cleanup of actions from earlier in
the test, however, a failure between the initial actions and the cleanup
will prevent the cleanup from taking place.
Fix these problems by modernizing and simplifying the test and by using
test_when_finished() for the cleanup action.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
|
|
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
|
|
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users like to set `remote.origin.prune = true` in their ~/.gitconfig
so that all of their repositories use that default.
However, our code is ill-prepared for this, mistaking that single entry to
mean that there is already a remote of the name "origin", even if there is
not.
This patch adds a test case demonstrating this issue.
Reported by Andrew Arnott.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of looking on the filesystem inside ".git/refs/remotes/origin",
use "git for-each-ref" to check for leftover references under the
remote's old name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
|
|
The internal API to interact with "remote.*" configuration
variables has been streamlined.
* tg/git-remote:
remote: use remote_is_configured() for add and rename
remote: actually check if remote exits
remote: simplify remote_is_configured()
remote: use parse_config_key
|
|
* js/git-remote-add-url-insteadof-test:
t5505: 'remote add x y' should work when url.y.insteadOf = x
|
|
When invoking `git-remote --set-url` we do not check the return
value when writing the actual new URL to the configuration file,
pretending to the user that the configuration has been set while
it was in fact not persisted.
Fix this problem by dying early when setting the config fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the test missing from fb86e32 (git remote: allow adding
remotes agreeing with url.<...>.insteadOf, 2014-12-23): we should
allow adding a remote with the URL when it agrees with the
url.<...>.insteadOf setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both remote add and remote rename use a slightly different hand-rolled
check if the remote exits. The hand-rolled check may have some subtle
cases in which it might fail to detect when a remote already exists.
One such case was fixed in fb86e32 ("git remote: allow adding remotes
agreeing with url.<...>.insteadOf"). Another case is when a remote is
configured as follows:
[remote "foo"]
vcs = bar
If we try to run `git remote add foo bar` with the above remote
configuration, git segfaults. This change fixes it.
In addition, git remote rename $existing foo with the configuration for
foo as above silently succeeds, even though foo already exists,
modifying its configuration. With this patch it fails with "remote foo
already exists".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When converting the git remote command to a builtin in 211c89 ("Make
git-remote a builtin"), a few calls to check if a remote exists were
converted from:
if (!exists $remote->{$name}) {
[...]
to:
remote = remote_get(argv[1]);
if (!remote)
[...]
The new check is not quite correct, because remote_get() never returns
NULL if a name is given. This leaves us with the somewhat cryptic error
message "error: Could not remove config section 'remote.test'", if we
are trying to remove a remote that does not exist, or a similar error if
we try to rename a remote.
Use the remote_is_configured() function to check whether the remote
actually exists, and die with a more sensible error message ("No such
remote: $remotename") instead if it doesn't.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expanding `insteadOf` is a part of ls-remote --url and there is no way
to expand `pushInsteadOf` as well. Add a get-url subcommand to be able
to query both as well as a way to get all configured urls.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By doing this, clients of upload-pack can now reliably tell what ref
a symbolic ref points at; the updated test in t5505 used to expect
failure due to the ambiguity and made sure we give diagnostics, but
we no longer need to be so pessimistic. Make sure we correctly learn
which branch HEAD points at from the other side instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When two or more branches point at the same commit and HEAD is
pointing at one of them, without the symref extension, there is no
way to remotely tell which one of these branches HEAD points at.
The test in question attempts to make sure that this situation is
diagnosed and results in a failure.
However, even if there _were_ a way to reliably tell which branch
the HEAD points at, "set-head --auto" would fail if there is no
remote tracking branch. Make sure that this test does not fail
for that "wrong" reason.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ms/remote-tracking-branches-in-doc:
Change "remote tracking" to "remote-tracking"
|
|
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace instances of ! test -f with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
|
|
The 'git remote show' and 'prune' subcommands are documented as taking
only a single remote name argument, but that is not the case; they
will simply iterate the action over all remotes given. Update the
documentation and tests to match.
With the last user of the -f flag gone, we also remove the code
supporting it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git remote add' subcommand did not check for superfluous command
line arguments. Make it so.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds one test or comment for each subcommand of git-remote
according to its current documentation. All but 'set-branches' and
'update' are listed as taking only a fixed number of arguments; for
those we can write a test with one more (bogus) argument, and see if
the command notices that.
They fail on several counts: 'add' does not check for extra arguments,
and 'show' and 'prune' actually iterate over remotes (i.e., take any
number of args). We'll fix them in the next two patches.
The -f machinery is only there to make the tests readable while still
ensuring they pass as a whole, and will be removed in the final patch.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/maint-remote-remove:
remote: prefer subcommand name 'remove' to 'rm'
|
|
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for git-remote.
This issue was was introduced in v1.7.10-233-gbb16d5:
bb16d5 i18n: remote: mark strings for translation
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git remote rename' will only update the remote's fetch refspec if it
looks like a default one. If the remote has no default fetch refspec,
as in
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/upstream/*
we would not update the fetch refspec and even if there is a ref
called "refs/remotes/origin/master", we should not rename it, since it
was not created by fetching from the remote.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming a remote called 'o' using 'git remote rename o foo', git
should also rename any remote-tracking branches for the remote. This
does happen, but any remote-tracking branches starting with
'refs/remotes/o', such as 'refs/remotes/origin/bar', will also be
renamed (to 'refs/remotes/foorigin/bar' in this case).
Fix it by simply matching one more character, up to the slash
following the remote name.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming a remote whose name is contained in a configured fetch
refspec for that remote, we currently replace the first occurrence of
the remote name in the refspec. This is correct in most cases, but
breaks if the remote name occurs in the fetch refspec before the
expected place. For example, we currently change
[remote "remote"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/remote/*
into
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/origins/remote/*
Reduce the risk of changing incorrect sections of the refspec by
matching the entire ":refs/remotes/<name>/" instead of just "<name>".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So 13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
git remote add -t heads/foo -t heads/bar --mirror=fetch
which makes the local "foo" and "bar" branches direct
mirrors of the remote, but does not fetch anything else.
This patch restores the original behavior, but only for
fetch mirrors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* xx/trivial:
tag.c: whitespace breakages fix
Fix whitespace issue in object.c
t5505: add missing &&
|
|
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/remote-set-branches:
Add git remote set-branches
Conflicts:
builtin/remote.c
|
|
Add ‘git remote set-branches’ for changing the list of tracked refs
for a remote repository with one "porcelain-level" command. This
complements the longstanding ‘git remote add --track’ option.
The interface is based on the ‘git remote set-url’ subcommand.
git remote set-branches base --add C
git remote set-branches base A B D
git remote set-branches base --delete D; # not implemented
Suggested-by: martin f. krafft <madduck@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add '--[no-]tags' options to 'git remote add' which add the
'remote.REMOTE.tagopt = --[no-]tags' to the configuration file.
This mimics the "--tags" and "--no-tags" options of "git fetch".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bc/t5505-fix:
t/t5505-remote.sh: escape * to prevent interpretation by shell as glob
t5505: add missing &&
t5505: remove unnecessary subshell invocations
|
|
* jc/maint-refs-dangling:
refs: ref entry with NULL sha1 is can be a dangling symref
|
Eric Sunshine
Junio C Hamano
Ross Lagerwall
Johannes Schindelin
Michael Haggerty
Vasco Almeida
Patrick Steinhardt
Thomas Gummerer
Elia Pinto
Ben Boeckel
Jeff King
Michael Schubert
Ramkumar Ramachandra
Thomas Rast
Nguyễn Thái Ngọc Duy
Jiang Xin
Martin von Zweigbergk
Matthieu Moy
Jens Lehmann
Jonathan Nieder
Samuel Tardieu